YOUWEI YW168G3 GPS Receiver Instruction Manual
- August 30, 2024
- Youwei
Table of Contents
Product instruction for use
Shenzhen Youwei Communication Co., LTD
YW168G3 GPS Receiver
Signed by __
Approved by
legal notice: First of all, thank you for using this product. If you
agree to the following terms, you will receive our support and services. When
you have doubts about this, welcome to inquire. If you cannot accept the
following terms, please stop using this manual.
The ownership of this manual belongs to the dealer. Reves any rights not
expressly granted in this manual. The information of the products in the
manual cannot be copied, transmitted, distributed, used and leaked from any
pictures, forms, data and other information contained in the manual without
the prior written permission of the distributor.
Reading this document does not, without the prior written consent of the
dealer, implicitly, otherwise or otherwise grant the reader any right to use
any marking appearing in this document. The storage and use of the product
shall be in accordance with the requirements of the product manual, relevant
contracts or relevant laws and regulations.
The Distributor reserves the right to modify and improve the products
described in this manual without prior notice, and also reserves the right to
revise or withdraw this manual at any time. If there is any unknown
information in this user manual, please consult your agent and dealer in time.
Special statement: this product is prohibited from being used for illegal
purposes, otherwise, all legal liabilities arising therefrom shall be borne by
the user himself.
Product characteristics
- 5V voltage
- Real-time location and tracking, track playback
- Ultra small volume
- Simple installation, do not press the power button, power on that work
- Built-in backup button battery, power loss is not lost
- GPS + Beidou + GLONASS triple positioning
Product appearance and accessories
Description of the product structure
Product parameters
GPS Receiver
| Chip | MediaTek GK9051 (Rom Version) |
|---|---|
| Frequency | 1575.42 MHz |
| Code | C/A Code |
| Protocol | NMEA 0183 v4.1 |
GALILEO L1 open service (with upgrade) Default:GGA,GSA,GSV,RMC
Support:VTG,GLL,TXT ublox binary and NMEA Command
Available Baud Rate| 9,600 bps
Channels| 66
Sensitivity| Tracking:-161dBm
Reacquisition:-160dBm ColdStart:-147dBm
Cold Start| 29 seconds, average
Warm Start| 28 seconds, average
Hot Start| 1 second, average
Accuracy| HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average
Velocity: 0.1 m/s
Timepulse signal: RMS 30 ns
Maximum Altitude| 50,000 meter
Maximum Velocity| 515 m/s(1000 knots)
Dynamics| 4G
Max navigation update rate| 1 Hz ( Default 1Hz )
Basic functions of the product
| content | function | explain |
|---|---|---|
| locate function | String data type | NMEA0183 Agreement |
| Street view map | A 360-degree no-dead Angle HD map |
Matters needing attention
-
Please pay attention to waterproof for electronic products.
-
The installation position must be covered without electromagnetic wave absorption (such as metal, explosion-proof heat insulation film).
-
Do not touch the equipment with the liquid, or operate it with wet hands.
-
Do not put the equipment into the fire
-
The device may not work when the temperature is below-20℃ or above + 60℃.
-
When the vehicle is in an underground parking lot, tunnel, or garage And a communication network may appear
Blind area cannot monitor the equipment; when the equipment is placed in the above area, the equipment will automatically return to normal work -
encounter abnormal situation, please do not repair by yourself. Connect to the non-original accessories or remove the connections between the parts The manufacturer shall not be liable for the damage.
-
The loss caused by human damage and information loss of this product has nothing to do with the company.
-
This product may have electromagnetic interference in some vehicle models and the electrical equipment in the car.
-
Do not make the product to strong impact or vibration, so as not to damage the product, resulting in dysfunction or failure.
-
The normal functional temperature range of this product is-20 degrees
C to 65 degrees C, beyond which the temperature range may cause product failure, fire or explosion.
After-sales service
- This product will enjoy a three-month replacement and a one-year warranty service from the date of shipment. During the warranty period, the equipment is caused by non-human factors or product quality, please contact the dealer in time.
- The damage caused by the customer’s private disassembly or force majeure (such as flood, vehicle accident) shall not be repaired.
- After the expiration of the warranty, the cost of maintenance materials is charged for the products caused by the use.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>