AKIA SCREENS ZZ Radio Frequency Remote Instructions
- August 29, 2024
- AKIA SCREENS
Table of Contents
Radio Frequency Remote
Synchronization Instructions
ZZ – Type
If your RF remote does not work with your screen, try the following steps to
synchronize. See below for instructions.
Make sure new batteries or working batteries are in your RF remote before
proceeding with the steps.
Synchronization Process
Step 1. Unplug your screen from the power outlet and wait one minute
before proceeding to step 2.
Step 2. Press and hold the STOP button on your RF remote.
Step 3. While holding the STOP button, plug the screen back to the power outlet. (The screen should drop and retract TWICE to confirm the sync process)
Step 4. Once the screen drops and retracts twice, release the STOP button. The process is now completed
If the screen only drops and retracts once or your RF remote was unable to synchronize to the screen, repeat the procedure beginning from step 1.
For Technical Support or an Akia Screens contact in your area, visit
012522BR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>