Weldclass 250MST Series Pulse MIG Welder Ultra User Guide
- August 28, 2024
- Weldclass
Table of Contents
Weldclass 250MST Series Pulse MIG Welder Ultra
Specifications
- Model: Ultra 250MST
- Processes: MIG, STICK, TIG Made in Italy
- Warranty: 10 Years (Standard warranty 2 years, extended 10-year warranty available) Synergic or Manual MIG Function 28 Pre-set Programs for different materials Compact, Robust, Lightweight design Digital Interactive Display
- Advanced Thermal Control for Steel, Aluminum, and Brazing
- Power Supply: ~240V 1-Phase
- Dimensions: L620mm x W260mm x H490mm
- Weight: 19kg
- MIG Output / Duty Cycle: Max 250A, 220A @ 20%, 130A @ 60%, 100A @ 100%
- Wire Sizes mm: 0.6, 0.8, 0.9, 1.0, 1.2
- Stick/TIG Output / Duty Cycle: 180A @ 25%
Product Usage Instructions
- Safety Precautions:
- Before operating the Ultra 250MST welding machine, ensure to read and understand the user manual thoroughly.
- Always wear appropriate safety gear including a welding helmet, gloves, and protective clothing.
- Make sure the work area is well-ventilated and free from flammable materials.
- Setting Up the Machine:
- Connect the power supply to the machine (~240V 1-Phase).
- Select the appropriate welding process (MIG, STICK, TIG) using the control panel.
- If using the Synergic MIG function, enter the material type and thickness for automatic parameter adjustment.
- Load the welding wire spool (5kg or 15kg) according to the wire size required.
- Connect the necessary leads – MIG torch, earth lead, and gas regulator.
- Operating the Machine:
- Once the machine is set up, follow these steps to start welding:
- Adjust the welding parameters such as amperage and wire feed speed as per your welding requirements.
- Trigger the welding process by activating the torch or electrode holder.
- Maintain a steady welding technique while moving along the welding joint.
- Cleaning and Maintenance:
- After each use, clean the machine from any spatter or debris. Regularly inspect and replace consumable parts like drive rollers and contact tips.
- Keep the machine in a dry and dust-free environment when not in use.
FAQs
- Q: Can I use this welding machine with a generator?
- A: Yes, the Ultra 250MST is generator-friendly. It is recommended to use a generator with a minimum rating of 13kVA, with an ideal rating of 15kVA or higher for optimal performance.
- Q: What materials can I weld with this machine?
- A: The Ultra 250MST is suitable for welding various materials including steel, aluminum, and brazing. It comes with 28 pre-set programs for different materials to make your welding process easier.
- Q: How do I register for the extended 10-year warranty?
- A: You can register for the extended warranty online after purchase by visiting the manufacturer’s website and following the provided instructions.
BATTERY INFO
- Made in Italy
- 10 Year Warranty*
- Synergic or Manual MIG Function (Enter material type & thickness & machine will set parameters automatically)
- Easy-To-Use
- For Safe & Compliant Stick MMA Welding
- 28 Pre-set Programs (For different materials.)
- Compact, Robust & Lightweight
- Takes 5kg or 15kg Spools
- Digital Interactive Display
- Advanced Thermal Control (Brilliant results on thin sheet – Steel, Alu & Brazing)
- Generator Friendly – Min: 13kva Ideal: 15kva+
Description
Includes
- MIG Torch 4m H/Duty BZL25
- Earth Lead 4m
- Gas Regulator
- Drive Rollers for 0.6/0.8/0.9 Steel 0.8/0.9/1.2 Gasless
Optional
- Stick Lead
- TIG Torch
- Trolley
MORE INFO
- Ultra 250MST User guide, specs, videos
- LEARN MORE
All specifications are subject to change without notice. Weldclass accepts no responsibility for any inaccuracies, errors, or omissions. Any application information is general only and is not a substitute for professional and specific advice. Warranty conditions as per weldclass.com.au/warrantyinfo, registration required. Weldclass is Australian-founded & operated, established in 1979. © 2024. E.&O.E weldclass.com.au. Updated 14.05.24
References
Read User Manual Online (PDF format)
Loading......