Weldclass ULTRA 41PA Plasma Cutter with Inbuilt Air Compressor Owner’s Manual
- August 28, 2024
- Weldclass
Table of Contents
Weldclass ULTRA 41PA Plasma Cutter with Inbuilt Air Compressor
OWNER’S MANUAL
MODEL: ULTRA 41PA
FEATURES
- Compact, Robust & Lightweight
- High Quality Plasma Torch (with Euro Connection.)
- Built-in Maintenance Free Air Compressor
- Protective Roll-Frame Design
- Cuts All Metals Steel, SS, Alu, Gal, Copper, Brass
- Generator Friendly – Min: 8kva Ideal: 10kva+
Part No. | Description |
---|---|
WC-41PA | 41PA Standard Package |
WC-06235 | Optional T100 Welder Trolley |
*Standard warranty 2 years, with extended 10 year warranty available
if registered online after purchase.
Includes:
Optional:
Ultra 41PA
User guide, specs, videos
All specifications are subject to change without notice. Weldclass accepts no responsibility for any inaccuracies, errors or omissions. Any application information is of a general nature only and is not a substitute for professional and specific advice.
Warranty conditions as per weldclass.com.au/warrantyinfo, registration required. Weldclass is Australian founded & operated, established 1979. © 2024. E.&O.E
Specifications:
-
Model: ULTRA 41PA
-
Type: Plasma Cutter with Inbuilt Air Compressor
-
Origin: Made in Italy
-
Warranty: 10 Years (with online registration for extended
warranty) -
Materials: Cuts All Metals – Steel, Stainless Steel, Aluminum,
Galvanized Steel, Copper, Brass -
Generator Compatibility: Min 8kva, Ideal 10kva+
-
Part Numbers: WC-41PA, WC-06235
Product Usage Instructions:
1. Setup:
Ensure the unit is placed on a stable surface with proper ventilation. Connect the Earth Lead (included) securely to the workpiece. Plug in the power cord to a compatible power source.
2. Turning On:
Switch on the power button located on the unit. The built-in air compressor will automatically start.
3. Adjusting Settings:
Use the control panel to adjust the cutting settings as per the material being worked on.
4. Cutting Process:
Hold the Plasma Torch steadily and press the trigger to start cutting. Move the torch along the cutting line at a steady pace for best results.
5. Cooling Down:
After use, allow the unit to cool down before storing it in a safe place.
Frequently Asked Questions (FAQ):
Q: What metals can the ULTRA 41PA cut?
A: The ULTRA 41PA can cut a wide range of metals including Steel, Stainless Steel, Aluminum, Galvanized Steel, Copper, and Brass.
Q: How do I register for the extended 10-year warranty?
A: To register for the extended warranty, visit our website at weldclass.com.au and follow the instructions for online registration after purchase.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>