Belanger KAR43TMB-v02 Collection Kara Roman Bathtub Trim Installation Guide
- August 28, 2024
- Belanger
Table of Contents
Belanger KAR43TMB-v02 Kara Roman Collection Bathtub Trim
Product Information
Product Specifications:
- Model: KAR43TMB
- Handle Kit: KTS2096MB
- Ceramic Cartridge: FC9AC010
- Aerator: FCAER3016
- Spout Kit: SPSA020MB
- Hand Shower: SPS2027MB
- Check Valve Size: 14mm (FCVAL2005)
- Elbow Kit Angle: 110 degrees
Product Usage Instructions
-
Care Instructions:
Rinse the product with clear water and dry it with a soft cloth. Avoid abrasive cleaners, cloths, or cleaning agents containing harsh chemicals. -
Installation Instructions:
Before installation, familiarize yourself with Canadian Plumbing Code regulations and local municipality plumbing codes. Ensure surge arresting devices are installed to prevent water hammering. Allow adequate opening for easy access to connections. -
Connection Advice:
Firmly hand-tighten the hose to the valve and add a quarter-turn using the proper wrench. Tighten more if necessary.
Frequently Asked Questions (FAQ):
-
Q: Can I use abrasive cleaners to clean the product?
A: No, abrasive cleaners should be avoided. Rinse with clear water and dry with a soft cloth. -
Q: What should I do before starting the installation process?
A: Ensure you are aware of Canadian Plumbing Code regulations and local municipality plumbing codes. Install surge arresting devices and allow easy access to connections.
Part List
No
| Description|
Part
---|---|---
1| Handle kit| KTS2096MB
2| Allen screw| 923001
3| Cap| HDL4029MB
4| Trim cap| DEC7012MB
5| Trim sleeve| DEC5011MB
6| Ceramic cartridge| FC9AC010
7| Aerator| FCAER3016
8| Spout kit| SPSA020MB
9| Diverter lift rod| DIV3001MB
10| Spout Allen screw| SCR2005MB
11| O-ring| FCORA1029
12| Diverter| FC905245D
13| Spout flange kit| KTS3003MB
14| Hand shower| SPS2027MB
15| Check valve (14mm)| FCVAL2005
16| Elbow kit (110 deg)| 12180 3MB
17| Washer| FCWAA1012
18| Hand shower flange kit| DEC3024MB
Compatible with:
IMPORTANT
Bélanger recommends using a professional plumber for all installation and
repair. Please inform yourself about the Canadian Plumbing Code’s regulations
and your local municipality’s plumbing codes before installation. The Canadian
Plumbing Code requires the installation of surge-arresting devices to
eliminate water hammering. ALLOW AN ADEQUATE OPENING TO EASILY ACCESS
CONNECTIONS OR OTHER PLUMBING DEVICES FOR MAINTENANCE OR REPAIR.
Technical drawing
RECOMMENDED TOOLS
- Apply the plumber’s putty under the plastic cover deck plate to seal your installation.
- Apply thread seal tape on threaded connections.
- The model shown in the installation steps may differ from the one in the box however connection type and installation steps are the same.
Installation steps
Before you begin
MAKE SURE THE MIXER BASE ORIENTATION IS AS SHOWN
REPLACE THE EXISTING HOSE WITH THE MATTE BLACK HOSE PROVIDED.
CARE INSTRUCTIONS
- Rinse the product with clear water.
- Dry the product with a soft cloth.
DO NOT:
Use abrasive cleaners, cloths, or paper towels. Use any cleaning agents
containing acid, polish, wax, alcohol, ammonia, bleach, solvent, or any other
corrosive or harsh chemical cleansers.
Warranty
For warranty and to register your product belangerfaucets.com.
Customer Service
- Monday to Friday: 8 a.m. – 4:30 p.m. E.S.T.
- Tel: 1-800-361-5960
- Fax: 1-888-533-8313
- E-mail: info@belangerfaucets.com.
Replacement parts are available on order.