OZARKE Glowing LED Vanity Mirror Instruction Manual
- August 28, 2024
- OZARKE
Table of Contents
OZARKE Glowing LED Vanity Mirror Instruction Manual
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service representatives will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems
WARNING!
- Do not use the power supply beyond the specified range (110V, 65Hz).
- Avoid scratching the surface and wires of the light during installation.
- Do not install the light outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
TOOLS
-
ELECTRIC DRILL
-
RULER
-
HAMMER
-
PENCIL
-
TAPE MEASURE
Operating Instructions
- Click: Light ON/OFF/3 Color Changing (3000 K-4000 K-6000 K)
- Long Press: Brightness 10%-100%-10%
- Click: Anti-fog ON/OFF
- Timer:
- Step 1: Turn off the light and hold the ON/OFF button until the timer starts flashing.
- Step 2: Short press the ON/OFF button to adjust the hours until correct, then wait for the hours to stop flashing and the minutes to start flashing.
- Step 3: Short press the ON/OFF button to adjust the minutes until correct. Done!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>