OZARKE Floor LED Vanity Mirror Instruction Manual

OZARKE Floor LED Vanity Mirror

Product Information

Specifications

• Power Supply Range : 110V, 65Hz
• Indoor Use Only
• Do Not Install Outdoors
• Do Not Use in Wet or Damp Conditions
• Do Not Expose to Corrosive Chemicals or Gases

Product Usage Instructions

Safety Instructions

1. Turn off the power to the area before starting any work.
2. Use tools designed for electrical work and in good condition.
3. Wear safety glasses, gloves, and other protective gear.
4. Test for electrical current before touching any wires.
5. Avoid working in wet or damp conditions.
6. Keep a safe distance from exposed wires or electrical components.
7. Consult a qualified electrician if unsure or encountering problems.

Installation Instructions
Tools Required:

• Electric Drill
• Ruler
• Hammer
• Pencil
• Tape Measure (2m)

Operating Instructions

1. Click for Light ON/OFF/3 Color Changing (3000K-4000K-6000K)
2. Long Press for Brightness Adjustment (10%-100%-10%)
3. Click for Anti-fog ON/OFF

Frequently Asked Questions (FAQ)

• Can the light fixture be used outdoors?
  No, the light should only be installed indoors and not outdoors.

• How should I clean the lamp?
  The lamp should be wiped with a clean soft cloth and should not be washed with water.

• What should I do if the power supply exceeds the specified range?
  Do not use the power supply beyond the specified range of 110V, 65Hz to prevent damage to the product.

Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service representatives will reach out to assist you

Before you get started

When working with electrical wiring, follow these safety instructions to prevent injury or damage:

1. Turn off the power: Before starting any work, turn off the power to the area you will be working in.
2. Use appropriate tools: Only use tools designed for electrical work and in good condition.
3. Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
4. Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
5. Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
6. Keep a safe distance: Stay away from exposed wires or electrical components.
7. Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.

WARNING!

1. Do not use the power supply beyond the specified range (110V, 65Hz).
2. Avoid scratching the surface and wires of the light during installation.
3. Do not install the light outdoors.
4. The lamp should not be close to corrosive chemical objects or gases.
   It should not be washed with water. It can only be wiped with a clean soft cloth.

Installation Instructions

Operating Instructions

1. Click: Light ON/OFF/3 Color Changing (3000K-4000K-6000K)
2. Long Press: Brightness 10%-100%-10%
3. Click: Anti-fog ON/OFF
4. Timer:
   • Step 1: Turn off the light and hold the ON/OFF button until the timer starts flashing.
   • Step 2: Short press the ON/OFF button to adjust the hours until correct, then wait for the hours to stop flashing and the minutes to start flashing.
   • Step 3: Short press the ON/OFF button to adjust the minutes until correct. Done!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>