cecotec Bamba CeramicCare AirGlam Hot Air Styling Brush Instructions

cecotec Bamba CeramicCare AirGlam Hot Air Styling Brush

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.
• Ensure that the mains voltage matches the voltage specified on the appliance rating label and that the plug is earthed.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• If the appliance is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the appliance switched off.
• As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

This icon means that the appliance must not be used in a bathtub, shower, or any other water-filled tank.

WARNING: do not use the appliance near bathtubs, showers, sinks, or other water-filled containers.

• Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• This symbol means warning, hot surface.
• Check the power cable regularly for visible damage. If the cable is damaged, it must be replaced by the official Cecotec Technical Support Service to avoid any danger.
• Ensure that the air inlets and outlets are not blocked.
• Turn off and unplug the appliance from the power supply immediately after use.
• Immediately unplug the appliance from the socket in these cases:
  • ▻ Abnormal operation.
  • ▻ Cleaning.
  • ▻ After use.
• Do not insert metal objects through the air inlets to avoid electric shocks.
• Do not wind the cable around the appliance.
• Keep your face, neck, and scalp away from the appliance.
• Do not leave the appliance on any surface while in operation.
• Do not use the appliance to comb wigs, natural hair extensions, fake hair, or animal hair.
• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.
• Do not insert objects in the air inlet.

PARTS AND COMPONENTS

• Head locking piece
• Temperature-setting button
• Power and speed switch
• LED temperature indicator lights
• Air-inlet filter cover
• Power cable
• Hair straightening brush
• Volumizing brush (60 mm)
• Round brush (32 mm)
• Left curler (32 mm)
• Right curler (32 mm)
• Hair dryer

NOTE:

The graphics in this manual are schematic representations and may not exactly match the appliance.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the appliance when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Bamba CeramicCare SuperSonic
• Hair straightening brush
• Volumizing brush (60 mm)
• Round brush (32 mm)
• Left curler (32 mm)
• Right curler (32 mm)
• Hair dryer
• Instruction manual

ATTACHING AND REMOVING THE HEADS

• To attach the heads, place the desired head on the body of the appliance matching the mark on the head with the open padlock symbol on the locking piece of the body. Then turn the locking piece until the mark on the head is aligned with the closed padlock symbol of the locking piece. Fig. 2
• To remove the heads, turn the locking piece until the mark on the head is aligned with the open padlock symbol of the locking piece. Then hold the body of the appliance with one hand and gently pull the head with the other hand to remove it. Fig. 3

OPERATION

1. Wash and condition your hair.
2. Dry your hair with a towel and comb it.
3. Ensure that the mains voltage matches the voltage specified on the appliance rating label and that the plug is earthed. Plug the appliance to a power supply.
4. Align the desired brush attachment with the slots and turn the locking piece to the locked position.
5. Use the switch to turn the appliance on and set it to the desired air speed.
6. Press the temperature-setting button repeatedly to select between cool, warm, or hot air. The LED temperature indicator lights will light up blue for cool air, yellow for warm air, and red for hot air.
7. With the warm and hot temperature settings enabled, you can briefly cool down the air temperature (cool shot) by holding down the temperature-setting button for a few seconds. When the button is released, the appliance will return to the selected temperature setting.
8. Switch the appliance off by setting the switch to the Off position and unplug it from the mains socket after use.
9. To remove the attachment, turn the locking piece to the unlocked position and gently pull the attachment out.

Using the curlers

1. With your hair at least 85% dry, place the curler on the side of the head whose hair you wish to curl first.
2. Separate the hair into approximately 2 cm strands.
3. Select a warm or hot temperature setting.
4. Bring the end of the hair strand close to the curler: the latter will attract the hair thanks to the Coandă effect and curl it.
5. Keep the hair wound on the curler for a few seconds and then apply a shot of cold air to fix the hairstyle.
6. Switch off the appliance and unwind the hair from the top. Repeat these steps with the next strand until all hair on that side of the head is curled.
7. Replace the curler with the one fit for the hair on the opposite side of the head and do the same.

After use

1. Turn the appliance off and unplug it.
2. Place it on a heat-resistant surface until it cools down.
3. Remove the hair and dust from the appliance and attachments.
4. Clean the appliance with a soft cloth and store it in a dry place.

CLEANING AND MAINTENANCE

• Unplug the appliance from the power supply and allow it to cool down before cleaning.
• Use a soft, damp cloth to clean the surface of the appliance.
• Do not immerse the appliance in water or other liquids.
• Do not use abrasive cleaners or scouring pads to clean the appliance.
• Do not twist, bend, pull, or damage the power cable.
• Clean the dirt and hairs that may be clogging the appliance.

Cleaning the filter:

Turn the air-inlet filter cover to unlock it and gently pull it downwards.

• Use a soft brush or a cotton swab to clean the air-inlet filter.
• Refit the cover by turning it to lock it in place. Fig. 4

TROUBLESHOOTING

It does not work properly.

| ****

Check if the appliance is correctly plugged in. Check if the attachment is correctly fitted.

Check if the appliance is switched off due to overheating.

Set the air speed to 0, unplug the appliance, and let it to cool down properly. Before turning it back on, make sure that nothing is clogging the air inlet.

TECHNICAL SPECIFICATIONS

• Product reference: 04440
• Product: Bamba CeramicCare SuperSonic
• Power: 1400 W
• Voltage and frequency: 220-240 V~; 50/60 Hz
• Technical specifications may change without prior notice to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the appliances and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities. Consumers must contact their local authorities or retailers for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protect the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end-user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.\ If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

CONTACT INFORMATION

• www.cecotec.es
• Cecotec Innovaciones S.L. Av. Reyes Católicos,
• 60 46910, Alfafar (Valencia)
• AP01230419

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>