ChiBatterySystems Gladiator Series 72 Pulsar Touring Installation Guide
- August 27, 2024
- CHIBATTERYSYSTEMS
Table of Contents
ChiBatterySystems Gladiator Series 72 Pulsar Touring
Specifications
- AH: 38Ah
- WH: 2745
- Continuous Amps: 315
- Peak Amps: 405
- Continuous Power: 23KW
- Peak Power: 32KW
- Charged Voltage: 84V
- Nominal Voltage: 72V
- Voltage Cut Off: 58V
- Cell: P42A
WHAT’S IN YOUR HARDWARE KITUSE
- RUBBER BLOCKBASE X1
- USE THIS FOR ADDED SECURITY WHEN RIDING. APPLY TO THE TOP OF YOUR SUR RON LID TO COMPRESS ON TOP OF THE BATTERY TO HOLD IT IN PLACE.
- BASE PLATE X1
- WASHER X4
INSTALLING YOUR GLADIATOR
- SCAN THE QR CODE
- FOR INSTRUCTIONS ON HOW TO INSTALL THE BASEPLATE AND WASHERS FOR YOUR NEW PULSAR BATTERY.
BATTERY HEALTH
- Low voltage cutoff: If you are using an aftermarket controller, make sure to properly set the low voltage cutoff to protect your battery from draining to the point of no return.
- 60V Gladiators: The lowest we recommend is 46.4V, which is 2.9V per cell group.
- 66V Gladiators: The lowest we recommend is 52.2V, which is 2.9V per cell group.
- 72V Gladiators: The lowest we recommend is 58V, which is 2.9V per cell group.
- Storing your battery: Batteries should be prepared for storage based on voltage, not percentage. They should be stored near nominal voltage and periodically checked and charged to ensure they remain within the following ranges:
- 60V Gladiators: between 54.4V-57.6V
- 66V Gladiators: between 61.2V-64.8V
- 72V Gladiators: between 68V-72V
- Keep your battery in a dry, temperature controlled environment during periods of storage. Storing your battery near 0% or 100%can results in permanent degradation and damage.
- Balance charging: Balance charging can be a preventative measure – it keeps the voltage difference between cell groups to a minimum and helps counter major imbalances before they can occur. We recommend performing a 48-hour balance charge every few months.
iOS OR Android Download
SMART BMS: Click iOS or Android to Download
- Your battery will arrive with all necessary settings preconfigured in the app.
- There are no changes needed within the smart BMS to begin use.
- Changes made in the app will affect the battery, so we only recommend adjusting settings if you are confident to do so.
- Every once in a while you will want to make sure everything is balanced and within tolerance.
- Cell levels should stay even, but as your battery is used there will be some variation.
- If you have any questions please reach out to our support team!
- Your battery will automatically balance the cell levels during regular use.
- If you would like to manually activate balancing you can navigate to the “BMS Control” tab and select the “StartAutoBalance” option.
- It will automatically deactivate when the delta value is 0.005V or lower.
Product Usage Instructions
- Installing Your Gladiator Battery
- Scan the QR code provided for instructions on how to install the baseplate and washers included in your hardware kit.
- Smart BMS Activation
- Your battery will automatically balance cell levels during regular use.
- To manually activate balancing, navigate to the BMS Control tab and select the StartAutoBalance option.
- It will deactivate when the delta value is 0.005V or lower.
FAQs
- Q: How should I store my battery?
- A: Store your battery near nominal voltage and periodically check and charge it to ensure it remains within recommended ranges.
- Q: How do I activate balancing manually?
- A: Navigate to the BMS Control tab and select the StartAutoBalance option to activate balancing manually.
Technical And Support
- For technical and support questions please reach out to Support@Chibatterysystems.com.
- FOLLOW US @chibatterysystems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>