CHIBATTERYSYSTEMS THE TITAN Series 72COMPACT Ride Pro Battery Owner’s Manual
- August 31, 2024
- CHIBATTERYSYSTEMS
Table of Contents
THE TITAN Series 72COMPACT Ride Pro Battery
Product Specifications
Model| AH| WH| Cont. Amps| Peak Amps| Cont. Power| Charged Volt| Volt Cut Off|
Cell
---|---|---|---|---|---|---|---|---
72 Compact Standard Edition| 42.5Ah| 3060Wh| 300| 450| 25KW| 84V| 58V| P42A
50S Edition| 50Ah| 3600Wh| 250| 450| 18KW| 84V| 58V| 50S
Product Usage Instructions
Battery Health Tips:
-
Low Voltage Cutoff: Set the low voltage cutoff
correctly to prevent battery drainage. -
Storing Your Battery: Store near nominal
voltage, not at extremes, and periodically check and charge within
specified ranges. -
Balance Charging: Perform a 48-hour balance
charge every few months to maintain cell group voltage
balance.
iOS Download – SMART BMS App:
To connect to the app, ensure the Titan is plugged in and
charging. Choose “single cell” view when entering the app. Use
voltage, temperature, and cell levels for accurate readings.
Reading Your Smart BMS Cell Levels:
Check individual cell levels under Battery Strings. Ensure
balance and tolerance levels are maintained. Contact support for
any questions on cell level differences.
Follow Us
@chibatterysystems
For technical and support questions, contact
Support@Chibatterysystems.com
Frequently Asked Questions (FAQ)
Q: How often should I perform a balance charge on my
battery?
A: We recommend performing a 48-hour balance
charge every few months to maintain cell group voltage balance.
Q: What should I do if my Smart BMS app shows strange
readings?
A: Use only the voltage, temperature, and cell
levels within the app for accurate readings. Contact support if you
encounter unusual readings.
THE TITAN SERIES
FOR THE ERIDE PRO
72 COMPACT
STANDARD EDITION SPECS
AH WH CONT. AMPS PEAK AMPS CONT. POWER CHARGED VOLT VOLT CUT OFF CELL
42.5Ah 3060Wh 300 450 25KW 84V 58V
P42A
S EDITION SPECS
AH WH CONT. AMPS PEAK AMPS CONT. POWER CHARGED VOLT VOLT CUT OFF CELL
50Ah 3600Wh 250 450 18KW 84V 58V
50S
BATTERY HEALTH
Low voltage cutoff: If you are using an aftermarket controller, make sure to
properly set the low voltage cutoff to protect your battery from draining to
the point of no return.
60V Titans: The lowest we recommend is 46.4V, which is 2.9V per cell group.
72V Titans: The lowest we recommend is 58V, which is 2.9V per cell group.
Storing your battery: Batteries should be prepared for storage based on
voltage, not percentage. They should be stored near nominal voltage and
periodically checked and charged to ensure they remain within the following
ranges:
60V Titans: between 54.4V-57.6V 72V Titans: between 68V-72V
Keep your battery in a dry, temperature controlled environment during periods
of storage. Storing your battery near 0% or 100% can result in permanent
degradation and damage. Balance charging: Balance charging can be a
preventative measure – it keeps the voltage difference between cell groups to
a minimum and helps counter major imbalances before they can occur. We
recommend performing a 48 hour balance charge every few months.
iOS Download
SMART BMS
Click iOS or Android to Download
Android Download
To connect to the app for the first time, you will want to make sure your
Titan is plugged in and charging. Once this is achieved, you should be able to
find your device in the app. To select the correct view, you will want to
choose “single cell” when first entering the app.
The only things you will need to use within the app are the voltage,
temperature, and cell levels. Other aspects of the app will give incorrect
readings, so don’t be alarmed if your app looks like it’s giving strange
readings, such as the amount of cycles.
READING YOUR SMART BMS CELL LEVELS
You will find your individual cell levels under the name Battery Strings.
Every once in a while you will want to make sure everything is balanced and
within tolerance. Cell levels should stay even, but as your battery is used
there will be some variation. If you have any questions about cell level
differences please reach out to our support team!
FOLLOW US
@chibatterysystems
For technical and support questions please reach out to Support@Chibatterysystems.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>