ELALA-AM-001 Automaniac Essential User Manual

ELALA-AM-001 Automaniac Essential

Check the items inside the packaging box

AM diagram

AM parameter table

Main Technical Specifications

100-240V~,50/60Hz,3A
Lock Type| TSA Combination Lock| Motor Technical Specifications
Operating Temperature| -10℃~40℃| Motor Size| 4 Inch
Rear Wheels| 4 Inch PU Wheels x 2| Number of Motors| 1
Capacity| 30L| Motor Weight| **** 1.5kg
Material| Shell: ABS+PC, Frame:

Aluminum Alloy

| Motor Power| 250W
Front Wheel| 4 Inch Motor Wheel| |
Maximum Riding Speed| 12km/h| |
Handle| Three-section Aluminum Handle| |
Color Options| Grey/Blue/Green/Orange| |

Warning
Do not dispose of used batteries casually to avoid environmental pollution. The used lithium batteries of this product should be recycled by our company, authorized dealers, or government-designated outlets.

Instructions for use

Unfolding:

1. Loosen the quick release, extend the handlebar to a suitable position, and tighten the quick release. Check for looseness.
2. Raise the seat lift lever to a suitable height, release, and l ock the seat height.
3. Lower the pedals, and unfolding is complete.

Folding:

1. Loosen the quick release, adjust the handlebar to a suitable position, and tighten the quick release.
2. Raise the seat lift lever, press it all the way down, and release the seat lift lever.
3. Retract the pedals, and folding is complete.

Removing the Battery Pack:

1. Pull out the battery pack handle.
2. Push out the battery pack to disconnect the DC port.
3. Take out the Power Bank Battery.

TSA Customs Lock Instructions

The default password is: 0-0-0. To set your own password, follow these steps:

1. Turn the password wheels to the default password: 0 0 0.
2. Press and hold the setting button (C) with a pen (or other tool) until you hear a “click” sound.
3. Set your own password, e.g., 8 8 8, by turning the password wheels (B).
4. Push the button (A) in the direction of the arrow, and when you hear a “click” sound, the setting button (C) will pop out, in dictating successful password setting.

Remember your password. You can repeat these steps to reset your password. The lock can be closed at any password, and opened by entering the correct password.
The TSA lock is certified by the US Transportation Security Administration for high security. Keep your password safe.

Cycling AM

Turn on the power switch and check if the battery is sufficient and the brakes are intact before cycling,

Cycling precautions

1. Before first use, it is recommended to charge it to a fully charged state; It is recommended to equip a certain level of protective gear when using.
2. During the cycling process, do not suddenly accelerate, brake suddenly, or make sharp turns to prevent skidding or overturning. Any personnel and property losses caused by improper operation shall be borne by the user.
3. During use, please comply with traffic rules and various venue management regulations.
4. Avoid using this product in bad weather (such as rainy, snowy or icy environments) and places (ponding, mudflat, steep slope, crowded places, etc.). At the same time, do not use this product in complex environments (such as public lanes, non motorized vehicle lanes, and densely populated areas) to avoid causing personnel and property damage.
5. When not riding, please turn off the power.
6. Minors must use this product under the supervision of a guardian.

Safety

Attention should be paid to all precautions during AM cycling. Users must carefully read and ride AM according to the requirements. Do not use this product before carefully reading the manual and understanding the AM performance; Do not lend it to people who do not know how to manipulate this product for cycling.

Very important

It is strictly prohibited to accelerate, decelerate, and turn sharply, and to ride at excessive speed (too fast); When the AM code meter displays one grid of electricity, it is not recommended to ride. Please maintain a low and constant speed while cycling. If there is a risk of falling, please prioritize personal safety and do not consider AM. AM may experience wear and tear during cycling and parking, which can affect the performance of the product. Therefore, before cycling AM, you must do the following checks:

1. It is necessary to check whether the various components of AM are securely installed, and undamaged, whether the braking function and tires are intact, and whether the tire pressure is normal.
2. The quick-release mechanism is locked.
3. You need to have a thorough understanding of the surrounding cycling environment to ensure that it is not disturbed by cars, pedestrians, pets, bicycles, and other obstacles.

Before safe riding AM, you need to practice extensively to master safe riding techniques. If the riding skills are not proficient or the product is not used according to the requirements of this guide, it may cause personal injury or property damage to the rider or third parties. Our company only assumes responsibility for product malfunctions or damages, and does not assume any responsibility for personal injury or property damage related to the use of this product.

How to use batteries

1. Battery replenishment: If the factory time is short, users can directly install the battery for use. If the factory time is long (more than 2 months) and the battery loses its power during storage and transportation, it is best to replenish the battery before using the new car. The method of replenishing electricity is to plug the original car specific charger into the battery charging port, then connect it to the power supply (mains: 100-240V) and charge for 2-3 hours until the charger shows a full charge indicator.
2. Normal charging of the battery: The operation process of AM is also the discharge process of the battery. After the operation stops, the battery should be charged in a timely manner. Please turn off the power when not cycling.
3. The connectors of the battery box should be securely inserted as required (the battery box connection wires are reliably connected before the vehicle leaves the factory). Loose or incorrect connections can cause abnormal operation of related components, and in severe cases, it can lead to component damage.
4. Lithium batteries should not be close to open flames or high-temperature sources, and the power battery should not be thrown into water. It is strictly prohibited for the battery to be exposed to sunlight during high temperature seasons.
5. The interior of the lithium battery is well sealed, do not disassemble or disassemble it without authorization.
6. For scrapped batteries, please hand them over to the recycling station or distributor for unified disposal. Do not discard them to avoid pollution.

Instructions for using the charger

1. Carefully check whether the rated input voltage of the charger (100-240V) is consistent with the grid voltage.
2. When charging is required, connect the input plug of the charger to the charging jack of the battery in order, and then connect the input of the charger to the AC power supply. At this time, the charging indicator of the charger is red, indicating that the battery is charging. When the green light is on, it will take about 15 minutes to fully charge, and the charging time is about 2-3 hours (the charging time depends on the remaining battery).
3. When charging is completed, first cut off the power, unplug the power plug, unplug the charging connector, and close the charging port cover.

Charging precautions

1. When charging, please place it in a safe place that children cannot touch.
2. It should not be used without full charge.
3. Do not use other brands of chargers for charging, and other types of batteries should not be charged with this charger.
4. The charger contains a high-voltage circuit, please do not disassemble it without authorization.
5. During use and storage, liquid and metal shavings should be prevented from infiltrating the interior of the charger, and precautions should be taken to prevent falls and impacts, in order to avoid damage.
6. When charging, do not cover any items with the charger.

Precautions for use

1. Do not store cash or valuables in the travel box.
2. Before cycling, please wear safety protective equipment such as helmets, gloves, elbow and knee pads to prevent accidents.
3. Before cycling, it is necessary to confirm the safety and reliability of the brakes, body, handlebars, wheels, etc. to avoid accidents.
4. Avoid riding on uneven, muddy, gravel roads, slippery roads, waterlogged roads, and stairs to prevent tire blowouts, wheel rim deformation, and potential hazards.
5. Do not ride with objects attached to the handlebars to prevent accidents caused by uncontrolled operation.
6. This product is suitable for one person to ride and is prohibited from carrying passengers.
7. It is not recommended to ride in environments that are too cold (0 ℃ and below) and too hot (40 ℃ and above).
8. Riding is prohibited on rainy days.
9. Overloading and crawling on slopes greater than 15 degrees are strictly prohibited.
10. Pregnant women, minors under 15 years old, and elderly people over 60 years old are prohibited from learning and cycling.
11. It is prohibited for individuals who are still under the influence of drugs or alcohol and have limited mobility and reaction abilities to ride.
12. Riding is prohibited in cases where it is not suitable for the rider due to their own reasons or other objective factors.
13. Develop a good habit of charging in a timely manner every day. When cycling, it is necessary to fully charge the battery before the minimum allowable voltage, so that the battery can serve you for a longer time. Therefore, it is very important to cultivate the habit of charging in a timely manner every day.
14. Almost all types of batteries are affected by the environment. Generally speaking, the discharge performance of electricity is better when the temperature is high. When the temperature drops below 0 ℃, the battery’s power may decrease by more than one-third. So, when winter approaches or in cold areas, it is normal for the range to decrease after a one-time charge. When the temperature rises to above 20 ℃, its function naturally recovers.
15. When pulling the battery box assembly, please be careful not to insert metal objects (such as wires, keys, etc.) into the battery charging hole or place them on the positive and negative contacts of the battery output to avoid causing battery short circuits, ignition, and personal safety issues.
16. It is prohibited to use chargers and other accessories that are not specifically provided by our company. If any accidents occur as a result, our company will not be responsible.
17. Lithium batteries are strictly prohibited from approaching sources of ignition, avoiding flammable, explosive, and corrosive gases.
18. Do not disassemble the battery box without authorization to avoid damaging internal parts.
19. It is strictly prohibited to short-circuit the positive and negative poles of the battery with wires or conductors to avoid danger and damage to the battery.
20. Lithium batteries should be handled with care to avoid collisions, falls, and accidents that may damage the casing.
21. When not in use for a long time, it is necessary to fully charge and turn off the device for storage. It cannot exceed 3 months from the last charging, and it needs to be recharged before being placed.
22. Unauthorized disassembly, modification or modification of this vehicle is prohibited. Our company is not responsible for any losses caused by this and may result in you losing your warranty commitment. When there is an internal malfunction, contact after-sales personnel. (The final interpretation rights of all terms and conditions in this manual belong to our company.)

AM Maintenance

Appearance cleaning

• Vehicles need to be dusted and cleaned at all times.
• During dust removal and cleaning, do not use damp cloth to wipe electrical components and connectors.

Battery Maintenance

• When using, if the battery is found to be low, it is necessary to replenish it in a timely manner.
• When not in use, turn off the switch.
• If left unused for a long period of time (more than two months), it is recommended to remove the battery and connect it to the entire vehicle.

Other maintenance

1. Regularly or according to the condition of the vehicle, tighten the screws to prevent loosening. If loose screws and nuts are found, they must be stopped from use.
2. Lubricating oil should be added to the front and rear axles every six months.
3. Check and tighten the loose contact of electrical connectors.
4. Check the tires for any cracks.
5. Car handlebars: Check if the quick disassembly is loose.
6. Is the brake applied.

AM warranty

Warranty scope (excluding human factors)

| Beyond warranty scope (including human factors)
1| Power bank| 1 year| Charging failure, abnormal output, capacity below 60%, free replacement of new battery within 12 months, and free replacement and maintenance of battery during 13-24 months

(based on the factory date of the battery)

| ****

Battery      water                 ingress, unauthorized disassembly

2| Motor| 1 year| Replace the motor with a new one within 12 months, and provide warranty treatment in the later stage (functional faults such as missing phase, short circuit, burning out of

the motor coil, internal abnormal noise, etc.)

| ****

Appearance,                              structural abnormalities, or damage; Unauthorized disassembly

3| Box| 1 year| Component fracture| Violent impact; Unauthorized

disassembly

4| Charger| 1 year| Abnormal charging| Unauthorized disassembly, collision,        compression

damage; inlet

5| Code table /accelerator| 1 year| Functional failure| Unauthorized disassembly, collision,        compression

damage; inlet

6

| ****

Tire

| ****

15 days

| ****

Causing trachoma, air leakage, and tire jumping

| Unauthorized disassembly (self repair or improper cycling   causing   non

replacement)

7

| ****

Handle

| ****

6 months

| Large areas of paint peeling off, obvious fading, blistering, cracking, abnormal folding,

and abnormal handling of pipes

| Unauthorized                         disassembly, violent impact,

unconventional operation

Tips

| 1.   Each folding mechanism part of the vehicle shall be inspected upon receipt of the new car, and replacement is allowed within seven days due to non-human factors. In principle, the functionality of the folding mechanism is not covered by the warranty.

2.  The wiring harness and outer tire are vulnerable parts and can be replaced within seven days due to non-human factors. In principle, they are not covered by warranty.

3.   Scratches and wear on the box are not covered by the warranty. Please carefully inspect upon purchase. Once sold, no returns or exchanges are accepted

4.  The default warranty period for unmarked components is 3 months, excluding human factors.

5.  Malfunctions caused by users not following the instructions in the user manual for use, maintenance, and adjustment are not covered by the warranty.

6.  Malfunctions caused by improper user storage or accidents are not covered by the warranty.

7.  No warranty card, invoice, or discrepancies between the items on the ticket are not covered by the warranty.

8.  Damage caused by cycling in the rain or soaking in water is not covered by the warranty.

9.  Damage to the battery caused by water ingress is not covered by the warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>