TORRAS PB9A Power Bank User Manual
- August 26, 2024
- TORRAS
Table of Contents
TORRAS PB9A Power Bank
Overview
- Wireless Charging Indicator (Blue Light)
- Power Button
- Wireless Charging Area
- Power Indicator (White Lights)
- SB-C Port
- Built-in Foldable Kickstand
Charging at will
This product is a small and portable hidden stand wireless charging power
bank, supporting magnetic wireless charging (iPhone 12 and above models),
regular wireless charging (other mobile phones that support wireless
charging), and wired charging. You are free to choose the corresponding
charging mode and use it as a desktop stand. You can play at will while
charging.
- Fold the ring stand for horizontal desktop charging.
- Unfold the ring stand for stand-style charging/use.
Attention
- The ring stand can adjust freely at 120° to support the product, freeing your hands.
- The ring stand makes it more convenient to play with your phone while charging/ holding your phone to charge while going out.
Use the Power Bank
- Click the power button to turn it on, which can check the battery level and start the wireless charging/wired charging double-click the power button to turn it off.
Magnetic wireless charging
(Go for iPhone 12 and above models mobile phones that support magnetic
wireless charging function) When the phone is turned on, magnetically attach
the mobile phone to the wireless charging area of the power bank, and the
wireless charging mode is started.
Regular wireless charging
(Go for iPhone and non-iPhone mobile phones that support wireless charging)
When the phone is turned on, put the phone that supports wireless charging
face-up on the power bank, align it with the wireless charging area, and the
charging symbol will light up to start wireless charging.
Wired charging
Connect the USB-C charging cable, and then click the power button to turn on
the phone to charge the phone/tablet and other devices.
Use low-current mode to charge Bluetooth earphones/smartwatches
Insert a low-current device, then press and hold the power button for 3
seconds to start trickle charging mode, and the power indicator will cycle
through the running light display, which can charge devices such as Bluetooth
earphones or smartwatches. The trickle charging mode is continuously turned on
for 2 hours (it will automatically turn off after 2 hours). Press and hold the
power button again for 3 seconds to switch trickle charging mode to normal
charging mode.
Charge the Power Bank
Plug the charging cable into the USB-C port to charge the power bank. When
charging, the power indicator light flashes; when fully charged, four power
indicator lights are always on.
Notes
- When it is charging and fully charged, the wireless charging indicator light does not light up.
- To guarantee the normal service life of the battery, please use and charge it at least once every three months.
Specifications
The parameters above are derived from the laboratory of TORRAS. The actual parameters would be different due to the production process and other factors. The image shown here is indicative only.
LED Display Instruction
- When charging the power bank
- When the power bank charges the devices (In wireless status)
Note
When the power bank charges the devices, the blue light of the wireless
charging indicator light (the first light) turns off in wired status.
Note
When the wireless charging output is abnormal or a foreign object (FOD) is
detected, the blue light of the wireless charging indicator will continue to
flash 10s, and it will recover within 2 seconds after it is removed.
Attention
- This wireless charger is not compatible with non-MagSafe phone cases.
- You cannot wirelessly charge your device in the following situations: a. using a case with a magnetic / iron plate; b. using a case with a foldable handle and bracket; c. using an ultra-thick (> 2.5 mm) protective phone case.
- Do not place any foreign objects between your phone and the wireless charger’s surface, including metal plates on a car mount, credit cards, keys, coins, metal objects, or NFC cards, which will make wireless charging fail or cause overheating.
- Do not use an adapter with an output of 5V == 1A (5W) or lower.
- Wireless chargers make charging more convenient than wired chargers, but due to current wireless technology limitations, the charging speed is slower than wired chargers.
- High temperatures can reduce charging speed and limit power, which is a common issue with all wireless chargers. It is recommended to charge your device in environments with temperatures below 25°C / 77°F.
- The phone case and the position of your device on the wireless charger will affect the charging speed. The further the device is from the center of the wireless charger, the slower the charging speed will be.
- For optimal charging performance, align your smartphone with the coil in the center of the wireless charger. If the charging icon does not appear on your smartphone, adjust its placement. Ensure the smartphone is always centered on the wireless charger.
Safety Significant Matters
When using this product, basic precautions should always be followed,
including the following:
- Please store this product in a cool and dry place.
- Do not store this product in a high-temperature or humid environment.
- Do not use the power bank after being immersed in water.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- For safety reasons, please do not drop the product. Do not use this product in high-temperature or humid environments to prevent short circuits.
- During charging, this product may generate heat. This is normal, please do not worry. If overheating occurs, please stop using it temporarily.
- After fully charging, please unplug the charger and plug it in a timely manner to avoid damaging the battery due to prolonged charging.
- In normal conditions, the battery performance will decline over several years.
- Do not place the product in high temperatures or fire. Avoid exposing the product to environments with temperatures exceeding 40°C, as this may result in overheating, fire, or explosion.
- If the power bank emits any unusual smell, overheats, changes color, or deforms, please stop using it immediately.
- Do not use harmful chemicals or detergents to clean this product.
- Misuse, dropping, or excessive abrasion may cause product damage.
- Do not damage or puncture the casing of the power bank. This may cause overheating, fire, or explosion.
- Please keep this product out of reach of children.
- Please use the original or certified charging cable.
- When using a charger for power supply, please purchase or use a charger that has obtained certification and meets the standard requirements.
Caution
This product is equipped with a built-in lithium battery, and please pay
attention to the following:
- Please charge the product at a time when the battery is low. If the product is not used for long periods, charge and discharge it once every three months to prevent battery damage.
- Do not disassemble, hit, squeeze, or throw into fire. If severe swelling occurs, stop using it. Do not place it in high-temperature environments. If the battery life significantly shortens, stop using it and seek professional maintenance.
- If the wrong type of battery is used, there is a risk of explosion, fire, etc.
- The battery (battery pack or assembled battery) should not be exposed to high temperatures such as direct sunlight or fire.
- Products containing built-in batteries should be separated from household waste when discarded. Take this product to an appropriate waste collection center for recycling and do not discard it casually.
- When disposing of used batteries, keep batteries of different electrochemical systems separate from each other.
- Note that a discharged battery may cause fire or smoke. Insulate the terminals with tape. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. All products
bearing this symbol are waste electrical and electronic equipment which should
not be mixed with unsorted household waste. Instead, you should protect human
health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and
electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. Please contact the installer
or local authorities for more information about the location as well as the
terms and conditions of such collection points.
FCC RF Radiation Exposure Statement
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
SHENZHEN TORRAS TECHNOLOGY CO., LTD.
Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi
Avenue, Minzhi ST, Longhua DIST, Shenzhen, China
Shenzhen TORRAS Technology Co., Ltd. All Rights Reserved.
Email: support@torraslife.com
Made in China (Shenzhen)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>