BINARY HDMI 5×1 Switch Installation Guide
- August 26, 2024
- BINARY
Table of Contents
BINARY HDMI 5×1 Switch
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference.
-
Read and follow all instructions and warnings in this manual. Keep it for future reference.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install according to the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades – one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where it exits from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. -
Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
-
To completely disconnect this equipment from the AC mains, disconnect the power supply cord plug from the AC receptacle.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
- CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.
- DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
- REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRODUCT OVERVIEW
Welcome to Binary. This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry. This product is compatible with HDMI 2.0/ HDCP 2.2 and supports 4K@60 Hz 4:2:0.
FEATURES
- Switches 5 HDMI sources to a single display
- 10.2 Gbps Bandwidth
- Full 4K – 4K@60Hz (4:2:0) including Full 1080p with Deep color
- Supports 7.1 channel surround sound, DTS-HD Master Audio, and TrueHD high bit rate audio
- Input Switching via the Front Panel or included IR Remote
- Input memory allows the switch to return to the last selected input if powered off
PACKAGE CONTENTS
- 1x HDMI Switcher, 5×1
- 1x 12VDC power adapter
- 2x Mounting Ears
- 4x Mounting Screws
- 4x Rubber Feet
- 1x Installation Manual
- 1x IR Remote
DEVICE LAYOUT
B-240-HDSWTCH-5×1 Front View
-
A. Power LED
Lights up blue when the unit has power -
B. IR Sensor
Receives IR signals from IR-emitting devices -
C. Input Status LEDs
Indicates signal transfer over output ports -
D. Source Selector Button
Press to select the active output port
B-240-HDSWTCH-5×1 Rear View
-
A. HDMI Inputs
Connect the HDMI cable from the source -
B. HDMI Output
Connect HDMI cables to the local display -
C. DIP Switch
IR RCVR PWR OFF/ON OFF to connect to control system | ON to connect to IR Receiver -
D. IR Receiver IN
IR input to connect to the IR Receiver or the output of a control system -
E. Thread-locking Power Connector
Connect to the included 12V DC, 2A Power Supply
INSTALLATION
- Connect an HDMI cable from the sources to the B-240-HDSWTCH inputs.
- Connect an HDMI cable the B-240-HDSWTCH output to a display (monitor or projector).
- Connect the power to the B-240-HDSWTCH.
- Inputs can be switched by IR or Front Panel button.
NOTE: Blue LED indicates successful sync
SPECIFICATIONS
**Technical **
HDMI Compliance| HDMI 2.0
HDCP Compliance| HDCP 2.2
Video Bandwidth| 10.2 Gbps
Video Support| 480p, 576p, 720p, 1080i, 1080p, 4k@30 4:4:4,
4K@60 4:2:0
Input TMDS Signal| 1.2V (peak-to-peak)
Input DDC Signal| 5V (peak-to-peak, TTL)
ESD Protection| (1) Human body model: ±15kV (air-gap discharge) &
±8kV (contact discharge) (2) Core chipset — ±8kV
IR Signal (Bidirectional)| Carrier frequency: 20–60kHz
**Connections **
HDMI| 6x HDMI Type A (19-pin female)
IR Receiver (In)| 1x 3.5mmMono/Stereo
Power| Thread-Locking
**Controls **
DIP switch 1| IR RCVR PWR OFF/ON
**Mechanical **
Housing| Metal enclosure
Dimensions| Without Bracket 7.00” W x 0.71” H x 2.31” D
With Bracket 8.31” W x 0.71” H x 2.31” D
Weight| 1.88 lbs. (0.86 kg)
Power Supply| 12V DC, 2A
Power Consumption| 12W (max)
Operation Temperature| 32–104°F
Storage Temperature| -4–140°F
Relative Humidity| 20–90% RH (no condensation)
Certifications and Compliance| Product: CE, FCC, RoHS
Power Supply: CE, FCC, RoHS, UL
WARRANTY
2-Year Limited Warranty
This Binary product has a 2-Year limited warranty. This warranty includes
parts and labor repairs on all components found to be defective in material or
workmanship under normal conditions of use. This warranty shall not apply to
products that have been abused, modified or disassembled. Products to be
repaired under this warranty must be returned to SnapAV or a designated
service center with prior notification and an assigned return authorization
number (RA).
SUPPORT 866.838.5052
- For SnapAV customers, snapav.com
- For Aisle 8 customers, onaisle8.com
- Rev: 240718-0916 | A6 Booklet fold © 2024 Binary
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>