BINARY B-360-1CAT-30 360 Series 4K HDR Economy Extender with IR Instruction Manual
- June 6, 2024
- BINARY
Table of Contents
BINARY B-360-1CAT-30 360 Series 4K HDR Economy Extender with IR
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference.
- Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment. Do not use this apparatus near water.
- Do not remove cover. No user serviceable parts inside.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install according to manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Do not override the safety purpose of the polarized or grounding plug. A polarized plug has two blades, one of which is wider than the other. A grounding plug has two matching blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at the plug end and where the power cord is attached to the apparatus.
- Only use attachments and accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as when the power supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or it has been dropped.
- To completely disconnect this equipment from power, disconnect the power supply cord from the power outlet.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
FCC WARNINGS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PRODUCTOVERVIEW
Thank you for purchasing this product. For proper installation and optimum performance, please read the instructions in this manual carefully.
B-360-1CAT-30 is a slim transmitter receiver set with HDCP 2.2 compatibility. It supports resolutions up to 4K@60Hz 4:4:4 8bit, and transmits UHD video, HD audio up to 30m/98ft over a Cat 6 or above cable. It also supports bi- directional PoC and one-way IR pass-through.
FEATURES
- Supports video resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2.
- Over a Cat 6/6an cable, transmits 4K@60Hz 4:4:4 8bit up to 30m/98ft.
- Over a Cat Se/6/7 cable, transmits 1080P@60Hz up to 50m/164ft.
- Supports multichannel audio upto PCM 7.1, DolbyTrueHD and DTS-HD Master Audio.
- Supports one-way IR pass-through from receiver to transmitter.
- Supports bi-directional PoC, one power adapter at either transmitter or receiver side can power both units.
- Slim profile for easy installation.
PACKAGE CONTENT
- 1 x B-360-lCAT-30 Extender Set
- 1 x DC 12V Power Adapter with US Pins
- 4 x Mounting Brackets (with Screws)
- 4xDrywallScrews
- 8 x Rubber Feet
- 2 x Power Cord Labels
- 1 x Installation Manual
DEVICE LAYOUT
B-360-1CAT-30 Transmitter
-
STATUS LED
Lights when there’s HDMI input. -
UTPOUT
Connect transmitter to receiver via a Cat Se/6/7 cable. -
DC12V
Connect to the power adapter provided. -
PowerLED
Lights when the device has power. -
HDMIIN
Connect to an HDMI source device. -
IR Flasher
Connect to an IRemitter.
B-360-1CAT-30 Receiver
-
STATUS LED
Lights when there’s HDMI output. -
UTPIN
Connect receiver to transmitter via a Cat Se/6/7 cable. -
DC12V
Connect to the power adapter provided. -
PowerLED
Lights when the device has power. -
HDMIOUT
Connect to an HDMI display device -
IR Receiver
Connect to an IR receiver.
APPLICATION DIAGRAM
Note: Connect a broadband IR receiver to IR Receiver and an IR emitter to
IR Flasher
SPECIFICATIONS
Transmission Distance
WARRANTY
Find details of the product’s Limited Warranty and other safety, patent, and legal resources at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489
SUPPORT
For chat and telephone, visit
tech.control4.com/s/contactsupport
• Email:[email protected] • Visit
tech.control4.com for discussions,
instructional videos, news, and more.
Copyright ©2021, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.
Documents / Resources
|
BINARY B-360-1CAT-30 360 Series 4K HDR Economy Extender with
IR
[pdf] Instruction Manual
B-360-1CAT-30, 360 Series, 4K HDR Economy Extender with IR, B-360-1CAT-30 360
Series 4K HDR Economy Extender with IR
---|---