BINARY B-760-EXT-444-300 760 Series 4K HDR Fiber Optic Extender Instruction Manual

BINARY B-760-EXT-444-300 760 Series 4K HDR Fiber Optic Extender Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference.

1. . Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment. Do not use this apparatus near water.
2.  Do not remove cover. No user serviceable parts inside.
3.  Clean only with a dry cloth.
4.  Do not block any ventilation openings. Install according to manufacturer’s instructions.
5.  Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat
6.  Do not override the safety purpose of the polarized or grounding plug. A polarized plug has two blades, one of which is wider than the other. A grounding plug has two matching blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into our outlet, consult an electrician for replacement of the obsolete outlet.
7.  Protect the power cord from being walked on or pinched, particularly at the plug end and where the power cord is attached to the apparatus.
8.  Only use attachments and accessories specified y the manufacturer.
9.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or it has been dropped.
10. To completely disconnect this equipment from power, disconnect the power supply cord from the power outlet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

PRODUCT OVERVIEW

B-760-EXT-444-300 is a fiber optic xtender set with HDCP 2.2 compatibility, extending HDMI signal up to 300m/1000ft over a duplex OM3 multi-mode fiber optic cable

It supports bi-directional IR or RS232 pass-through via Control switch settings so that either infrared devices or RS232-enabled devices between transmitter end and receiver end can be controlled with ease. It is ideal for applications such as homes, offices, digital entertainment centers, conference rooms and schools, where HDMI signal extension over long distances is needed

FEATURES

• Supports input and output resolutions up to 4K@60Hz 4:4:4 8bit.
• Supports HDCP 2.2.
• Supports HDR (High Dynamic Range), including HDR 10, HDR 10+, HLG and Dolby Vision (HDR10+, HLG and Dolby Vision only up to 4K@30Hz).
• Transmits 4K@60 4:4:4 signal up to 300m/1000ft via a duplex OM3 multi-mode fiber optic cable.
• Supports bi-directional IR or RS232 pass-through via Control switch settings.
• Supports multichannel audio up to PCM 7.1, DTS Master HD and Dolby True HD.

PACKAGE CONTENT

• 1 x B-760-EXT-444-300 Extender Set
• 2 x 10Gbps 850nm MM SFP+ Modules
• 2 x DC 12V Power Adapters with US Pins
• 2 x Phoenix Male Connectors (3.5mm, 3 Pins)
• 4 x Mounting Brackets (with Screws)
• 4 x Drywall Screws
• 8 x Rubber Feet
• 2 x Power Cord Labels
• 1 x Installation Manual

DEVICE LAYOUT

B-760-EXT-444-300 Transmitter

1. Power LED
   On/Off: The device is powered on/off.

2. Status LED
   On: The device is working properly.
   Off: The device is not working properly.

3. HDCP LED
   On: HDCP protected content is being transmitted.
   Blinking: Non-HDCP protected content is being transmitted.
   Off: No content is being transmitted.

4. Link LED
   On: HDBT link is normal.
   Blinking/Off: No HDBT link or link error.

5. +12V DC
   Connect the power adapter provided.

6. HDMI IN
   Connect to an HDMI source device.

7. Optical Out
   Connect to the Optical In of the receiver via a duplex OM3 multimode optical fiber cable

8. RS232
   For RS232 pass-through.

9. IR Receiver
   Connect to an IR receiver.

10. IR Flasher
    Connect to an IR emitter

11. Control
    RS-232: For RS232 pass-through.
    IR: For IR pass-through.

B-760-EXT-444-300 Receiver

1. Power LED
   On/Off: The device is powered on/off.

2. Status LED
   On: The device is working properly.
   Off: The device is not working properly.

3. HDCP LED
   On: HDCP protected content is being transmitted.
   Blinking: Non-HDCP protected content is being transmitted.
   Off: No content is being transmitted.

4. Link LED
   On: HDBT link is normal.
   Blinking/Off: No HDBT link or link error.

5. +12V DC
   Connect the power adapter provided.

6. HDMI Out
   Connect to an HDMI display device.

7. Optical In
   Connect to the Optical Out of the transmitter via a duplex OM3 multimode optical fiber
   cable.

8. RS232
   For RS232 pass-through.

9. IR Receiver
   Connect to an IR receiver.

10. IR Flasher
    Connect to an IR emitter.

11. Control
    RS-232: For RS232 pass-through.
    IR: For IR pass-through.

INSTALLATION AND WIRING

Installation

Note: Before installation, please ensure the device is disconnected from the power source.

Steps to install the device in a suitable location:

1. Attach the installation bracket to the transmitter’s enclosure using the screws provided in the package separately. The bracket is attached to the enclosure as shown.
   

2. Repeat step 1 for the other side of the transmitter.

3. Repeat step 1-2 for the receiver.

4. Attach the brackets to the surface you want to hold the unit against using the screws (provided by others).

Wiring

Warnings:

• Before wiring, disconnect the power from all devices.
• During wiring, connect and disconnect the cables gently

Steps for device wiring:

1. Connect an HDMI source (such as Blu-ray, games console, satellite/cable TV, media server etc.) to HDMI In port of the transmitter.
2. Connect the Optical Out port of the transmitter to the Optical In port of the receiver with a duplex OM3 multimode optical fiber cable
3. Connect an HDMI display device (such as LED/LCD display or projector) to HDMI Out of the receiver.
4. Connect for additional control options:
   • IR: For bi-directional IR control of connected sources and displays from either location, connect IR emitters to the IR Flasher ports of the transmitter and receiver, and connect IR receivers to the IR Receiver ports of the transmitter and receiver.
   • RS232: Connect RS232-enabled devices to RS-232 ports of the transmitter and receiver respectively to control RS232 devices
5. Connect the DC 12V power adapters provided to the transmitter and receiver.

IR PASS-THROUGH

IR pass-through function allows you to control the source from the display location or control the display from source location.

To control the source from the display location:

1. Set the Control switches of both transmitter and receiver to IR mode.
2. Connect the IR emitter to IR Flasher port of transmitter and the broadband IR receiver to IR Receiver port of receiver.

When all is set, the source can be controlled at the display location through a source device remote.

To control the display from the source location:

1. Set the Control switches of both transmitter and receiver to IR mode.
2. Connect the IR emitter to IR Flasher port of receiver and the broadband IR receiver to IR Receiver port of transmitter.

When all is set, the display can be controlled at the source location through a display device remote.

Application Example: IR Pass-through

RS232 PASS-THROUGH

RS-232 ports can be used for bi-directional RS232 signal pass-through between the transmitter and receiver.

To start RS232 signal pass-through between transmitter and receiver:

1. Set the Control switches of both transmitter and receiver to RS232 mode.
2. Connect a RS232 Master (or Slave) device to RS-232 port of transmitter using a RS232 cable.
3. Connect a RS232 Slave (or Master) device to RS-232 port of receiver using a RS232 cable.
   Application Example: RS-232 Pass-through

SPECIFICATIONS

Technical

General

Operating Temperature| -10°C to 50°C/263°F to 323°F (Indoor)

-20°C to 60°C/253°F to 333°F (Outdoor)

---|---
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, non-condensing
ESD Protection| Human-body Model:

±15kV (Air-gap discharge)

Power Supply| DC 12V 2A
Power Consumption (Max)| 3.5 W
Device Dimension (W x H x D)| 150 mm × 20 mm × 74.4 mm/5.9” x 0.79” x 2.93” each for TX/RX
Product Weight| 0.3kg/0.66lb each for TX/RX

Transmission Distance

Note: T568B straight-through Category cable is recommended.

HDMI

| Input/Output: 15m/49ft| 1080P@60Hz
Input/Output: 10m/33ft| 4K@30Hz
Input: 3m/10ft Output: 5m/16ft| 4K@60Hz 4:4:4 8bit

WARRANTY

Find details of the product’s Limited Warranty and other safety, patent, and legal resources at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489

FCC WARNINGS

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the    interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not xpressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SUPPORT

For chat and telephone, visit tech.control4.com/s/contactsupport

Email: TechSupport@SnapOne.com 
Visit tech.control4.com for discussions, instructional videos, news, and more.

Copyright ©2021, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.

B-660-EXT-444-300-B

References

• Policies
• tech.control4.com
• tech.control4.com/s/contactsupport

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>