INVENTER e4 Basic Connect User Guide
- August 27, 2024
- inVENTer
Table of Contents
INVENTER e4 Basic Connect
Product Information
Specifications
-
Model: Basic Connect e4 / e8
-
Product Codes: 1003-0155, 1003-0156, 1003-0157, 1003-0158,
1003-0159, 1003-0160, 1003-0161, 1003-0162 -
Website: www.inventer.de
Product Usage Instructions
1. Mounting
Follow the instructions provided to assemble the components included in the package:
- 5040-0069
- 5040-0032
- 5040-0030
- 5022-0007 (x2)
- 5040-0034
- 5040-0033 (x2)
- 5040-0039
2. Controls and Indicators
The device has the following controls and indicators:
- Boost 100%
- 75% – 4
- 50% – 3
- 35% – 2
- 25% – 1
- Status LED:
- Solid red – Channel search in progress
- Blinking red – Coupling mode active
- Blinking LED indicates expired filter change interval
3. Initial Setup Completion
The initial setup is completed when:
- Connect inner blinds are installed as per instructions
- Coupling mode is activated and deactivated
- The system shuts down completely with closure flaps inposition
4. Warranty and Service
For technical assistance, contact our service representatives at +49 (0) 36427 211-0 or email info@inventer.de.
FAQ (Frequently Asked Questions)
Q: How do I know when to replace the filter?
A: The blinking LED indicates an expired filter change interval, prompting you to replace the filter.
Q: What should I do if the device does not enter coupling mode?
A: Check the installation of components and ensure they are correctly assembled according to the provided instructions.
Q: How can I adjust the airflow volume?
A: Use the controls on the device to adjust airflow percentages from 25% to 100% as needed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>