inVENTer iV14-Zero Sound Insulation Fan Installation Guide
- June 10, 2024
- inVENTer
Table of Contents
inVENTer iV14-Zero Sound Insulation Fan
Product Information
The iV14-Zero is a ventilation unit manufactured by Inventer GmbH. It comes with two different sizes – Standard and Slim (500mm and 750mm respectively). The unit has three air flows: Supply, Extract, and Additional Extract. It operates on 230V AC power supply and has three control modes: CW, CCW, and ETA. The product item number is 5040-0014.
Product Usage Instructions
- Before installation, carefully read the user manual and follow the instructions.
- Decide the installation location and install the unit using appropriate tools and materials.
- Connect the unit to a power supply of 230V AC.
- Choose the appropriate air flow mode: Supply or Extract.
- Select the proper control mode: CW, CCW, or ETA.
- To change the air flow direction, adjust the DIR1 (III) and DIR2 (V) settings accordingly.
- The VOUT+ (IV) setting should be set to the desired air flow volume.
- To operate the unit, turn it on using the START switch in the desired control mode.
- The unit can be turned off using the OFF switch.
- Regularly clean and maintain the unit for optimal performance and longevity.
Note : If you are unsure about any aspect of installation or usage, consult a qualified electrician or technician.
TOOLS AND PARTS INCLUDED
INSTALLATION INSTRUCTIONS
This documentation is only valid in conjunction with the inVENTer ventilation system‘s original instructions. Carefully read the original documentation before beginning your work and observe all safety and warning instructions
inVENTer GmbH Ortsstraße 4a D-07751 Löberschütz www.inventer.de
Version : 2.0 – 02/2023
Art.-Nummer : 5040-0014
Item number www.inventer.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>