AIRCYCLER G3 Indoor Air Quality Sensor User Guide

: August 26, 2024
: AIRCYCLER

Table of Contents

AIRCYCLER G3 Indoor Air Quality Sensor
Product Information
Product Usage Instructions
AIRCYCLER® G3 & INDOOR AIR QUALITY SENSOR SETUP
Managing the Indoor Air Quality Sensor
AIRCYCLER INDOOR AIR QUALITY SENSOR
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIRCYCLER G3 Indoor Air Quality Sensor

Product Information

Specifications

Product Name: AIRCYCLER G3 + SENSOR
Manufacturer: AirCycler
Website: www.aircycler.com

Product Usage Instructions

Managing the Indoor Air Quality Sensor
Option 1: Via AirCycler Web Dashboard

Go to www.dashboard.AirCycler.com. If you have already created an account on the AirCycler mobile app, use the same credentials to log in to the AirCycler dashboard. If you do not already have an account, select Create Account and complete account setup.
Ensure your AirCycler G3 is added to Systems on your dashboard. If it isn’t already, refer to the AirCycler G3 manual for instructions on connecting the app and G3.
With G3 system added, select Systems from the menu on the left. Select the G3 System from the list.
The sensor will appear under Connected Sensors. You can select the sensor to see current indoor air quality readings and connectivity information.
To set AirCycler G3 operation preferences based on indoor air quality data from your sensor, select Dashboard from the main menu and locate your G3.
Activate the Indoor Air Quality tab by tapping the slider button, and set your G3 operation preferences for each environmental factor as desired. *Note AirCycler’s recommended default settings. Use of the app, system, and content is at your sole risk.
Select SAVE to save system settings.

FAQ
Q: Where can I find additional product information?
A: Additional product information can be found at www.aircycler.com/connect.

AIRCYCLER® G3 & INDOOR AIR QUALITY SENSOR SETUP

Pairing the AirCycler® g3 and AirCycler® Indoor Air Quality Sensor With the AirCycler® g3 installed and powered on,

Select Setup from home screen on the g3
Select Add Device
Select Activate to activate pairing mode
With g3 in pairing mode, power on the AirCycler® Indoor Air Quality Sensor:
There will be a quick flash at startup indicating the sensor is starting up.
A green ring on the air quality sensor indicates successful pairing.

If device is paired to a G3 but the G3 is not available or the connection fails the ring will blink cyan every 10 seconds, until the device restarts and tries again.

Managing the Indoor Air Quality Sensor

OPTION 1: VIA AIRCYCLER WEB DASHBOARD
Go to www.dashboard.AirCycler.com. If you have already created an account on the AirCycler mobile app, use the same credentials to log in to the AirCycler dashboard. If you do not already have an account, select Create Account and complete account setup.
Be sure your AirCycler g3 is added to Systems on your dashboard. If it isn’t already, refer to the AirCycler g3 manual for instructions on connecting the app and g3.
With g3 system added, select Systems from the menu on the left. Select the g3 System from the list.
The sensor will appear under Connected Sensors. You can select the sensor to see current indoor air quality readings and connectivity information.
To set AirCycler g3 operation preferences based on indoor air quality data from your sensor, select Dashboard from the main menu and locate your g3.
Activate the Indoor Air Quality tab by tapping the slider button, and set your g3 operation preferences for each environmental factor as desired.

Note AirCycler’s recommended default settings.
Use of the app, system and content is at your sole risk.
1. Select SAVE to save system settings.
2. OPTION 2: VIA AIRCYCLER MOBILE APP
3. Download the AirCycler Mobile app from the App Store or Play Store if you have not already, and create your account. If you have already created an AirCycler dashboard account you can use the same credentials.
4. Be sure your AirCycler g3 is added to Systems in the app. If it isn’t already, refer to the AirCycler g3 manual for instructions on connecting the app and g3.
5. With g3 system added, select Systems from the menu on the top left of your screen. Select the g3 System from the list.
6. The sensor will appear under Connected Sensors. You can select the sensor to see current indoor air quality readings and connectivity information.
7. To set AirCycler g3 operation preferences based on indoor air quality data from your sensor, select Home from the main menu and locate your connected g3. If you have multiple g3s installed, slide right to scroll through each system.
8. Activate the Indoor Air Quality tab by tapping the slider button, and set your g3 operation preferences for each environmental factor as desired.
Note AirCycler’s recommended default settings.
Use of the app, system and content is at your sole risk.
1. Tap SAVE to save system settings.