AIRCYCLER G3 Wireless Ventilation System User Manual

Table of Contents

AIRCYCLER G3
USER MANUAL
AWAIR® OMNI + AIRCYCLER®
G3 INTEGRATION

We recommend having your AWAIR Omni device installed prior to integrating with the AirCycler
Connect System and App.
IF AWAIR OMNI IS NOT ALREADY INSTALLED
Go to install-omni.getawair.com for installation guide
Download Awair Home App
Sign up to create Awair account
Follow instructions to add device
Be sure your Awair sensor is updated to its latest firmware version through the Awair app before integrating with the g3 system.

Go to www.dashboard.AirCycler.com. If you have already created an account on the AirCycler mobile app, use the same credentials to log in to the AirCycler dashboard. If you do not already have an account, select Create Account.
From the main menu select Settings
Select Awair
Follow instructions for connecting your Awair account and device. You will need your Awair account credentials.

Once connected, you can now access your Omni from the AirCycler dashboard

From the main app menu, select Third Party Devices. You will see your Awair device listed. Select the device to see current data readings.
In the System Settings page for your g3, you can now select the Omni device (See AirCycler g3 manual for details on g3 System Settings)
To set AirCycler g3 operation preferences based on indoor air quality data from your Omni, select Dashboard from the main menu and locate your g3.
Activate the Indoor Air Quality tab by tapping the slider, and set your g3 operation preferences for each environmental factor as desired.

Please contact us at support@aircycler.com with any questions. Additional product information can be found at www.aircycler.com/connect.
AirCycler Mobile App Terms & Conditions www.aircycler.com/pages/aircycler- mobile-app-terms-conditions

Download the AirCycler Mobile app from the App Store or Play Store if you have not already, and create your account. If you have already created an AirCycler dashboard account you can use the same credentials.
Be sure your AirCycler g3 is added to Systems in the app. If it isn’t already, refer to the AirCycler g3 manual for instructions on connecting the app and g3.
Factory reset the Omni sensor by pressing and holding the small button on the back of the device next to the USB power port for 10 seconds
After factory reset, the Omni should have a blue blinking LED indicator, telling the user it is ready for pairing
Using the AirCycler app, select the Menu button on the top left of the screen
Tap Systems and tap the AirCycler g3 system that you are pairing your Omni to
On the System Details page, tap the three dots on the top right for more options
Tap Connect Sensor. The app will search for the Omni to pair with
If the app does not find the Omni, ensure the Omni was factory reset prior to setup process and try again
Tap on name of found Omni device
On the Confirm Local Sensor page, tap Continue
Tap Finish
Awair Omni should now display a solid green status light

You can now access your Omni from the AirCycler app

From the main app menu, select Third Party Devices. You will see your Awair device listed. Select the device to see current data readings.
In the System Settings page for your g3, you can now select the Omni device (See AirCycler g3 manual for details on g3 System Settings)
To set AirCycler g3 operation preferences based on indoor air quality data from your Omni, select Dashboard from the main menu and locate your g3
Activate the Indoor Air Quality tab by tapping the slider, and set your g3 operation preferences for each environmental factor as desired