AirCycler FreshConnect Wireless Ventilation System User Manual
- August 23, 2024
- AIRCYCLER
Table of Contents
AirCycler FreshConnect Wireless Ventilation System
FAQs
For troubleshooting assistance and frequently asked questions, visit :
www.aircycler.com/pages/support
For Limited Warranty information please visit:
Note: Warranty is void if installer sticker is not present.
Technical Support:
DESCRIPTION
The FreshConnect is designed to control fresh air intake or exhaust fan and features two optional FlowProbe ports for dual airflow monitoring
INSTALLATION
Simply plug the module into an un-switched 110VAC outlet and plug the fresh air fan unit into the module.
PAIRING
To pair the module to the AirCycler g3 controller: Push and hold the pairing button for 5 seconds. The LED will flash YELLOW. Go to the AirCycler g3 controller and go to SETUP -> ADD DEVICE. You will see the FreshConnect Module appear. Select it and it is now paired.
OPERATION
| Light | State | Status |
|---|---|---|
| Blue | Slow Flashing | Idle |
| Yellow | Solid | Fan On |
| Red | Flashing | Probe Failure* |
*When optional FlowProbe is installed
TESTING
To test the module, press the pushbutton on the lower left side under the
small cover. A quick push will turn the unit on, pushing again will shut it
off. While on, check the LCD display on the AirCycler controller to see it
shows that the module is on.
RESET
To reset to factory settings and erase all wireless configurations: Push
and hold the pushbutton for 10 seconds. The LED will flash red then return to
BLUE.
- Brand name: AirCycler
- Model/type number: AC-FSH
- Ratings (supply and load): 120Vac 50/60Hz
- 100W Inductive (Fan load)
- Disconnection means: Type 1Y
- Pollution degree: 2
- Rated impulse voltage: 1500V
- Automatic action: 10,000 cycles
CAUTION
RISK OF ELECTRIC SHOCK – USE IN DRY LOCATION ONLY
- Do not connect any devices that have a larger power rating
- Do not connect any devices that may cause harm to objects or persons when controlling remotely.
- For indoor use only.
For troubleshooting assistance and frequently asked questions,
- visit: www.aircycler.com/pages/support
- For Limited Warranty information please
- visit: www.aircycler.com/products
Note: Warranty is void if installer sticker is not present.
- TECHNICAL SUPPORT www.AirCycler.com