CAMECHO Y3XS Wireless Car Play Adapter Instruction Manual

CAMECHO Y3XS Wireless Car Play Adapter

Device connection and introduction

Device connection and introduction to the main page

1. Insert the device into the Car Play interface of the original car, wait to enter the device interface
2. Main interface introduction
3. time
4. signal status
5. voice key
6. wiFi
7. GPS status
8. Home button
9. Return button
10. USB/Bluetooth connection status

Additional: Long press the Home button to enter the Android background, click and drag the APK to the left to split the screen

Device hardware parameters

1. Connect to the carplay port of the original car
2. 4G card slot
3. HDMI output
4. USB port

WiFi version device does not have 2 or 3 interface.

Function settings

Main interface function path: Settings – Navigation path selection

Using the touch assistant

Wireless CarPlay interface

Application interface

Wireless CarPlay connection

1. Click the phone icon to enter the CarPlay connection interface, use the mobile phone to match the box Bluetooth, the box Bluetooth device name is: BT-XXXX
2. After the bluetooth connection is successful, the mobile phone will pop up a CarPlay car window, click Use to enter the CarPlay interface

How to turn on WIFI

How to turn on WIFI in 5G frequency band (the network effect is more stable)

Bluetooth Internet access function (suitable for wireless CarPlay function)

Status of the lights

Blue: Power light
Green light: upgrade light
Red light: system light
(Slow flash: 4 seconds/time Fast flash: 0.5 seconds/time)

• During the software upgrade, the green light flashes slowly and the red light goes out
• After the software upgrade is completed, the green light and the red light flash rapidly at the same time
• Software upgrade failed Green and red lights are always on
• No software detected Green and red lights are off

System Upgrade

Download it to the U disk, do not decompress it, plug in the device, and remind you to update and then update, the process will return to the original car interface, do not touch it, do not power off, judge whether the upgrade is successful according to the flashing state of the light, and then drop the U disk after success.. Note: Be sure to pull out the U disk to restart!!!

1. Do not power off during the installation and upgrade process
2. After the upgrade is complete, please delete the files in the U disk
3. To check if it is new software, click Device: Settings – Version Information

(If the GPS positioning signal is not good, you can purchase a GPS signal amplifier separately)

Common problem

Why is it disconnected

1. Cancel the Bluetooth pairing between the mobile phone and the original car host
2. Whether the wire interface/typec adapter is in poor contact
3. Consider whether the original car host usb power supply is not enough, use the Y-shaped cable provided by our company
4. Device and car compatibility issues

How to use the Y-type wire?

• TYPE-C is connected to the device, To Carplay is connected to the carplay interface of the original car; To 5V can be connected to the USB interface of the original car (the wrong plug will not enter the device)

U disk supported format and capacity

• Supported formats: FAT32/NTFS
• Support capacity: 8G/16G/32G/64G

What if the GPS signal is poor?

GPS signal will be affected by the environment, check the signal value in Settings – Positioning

1. Take the box out of the armrest box and place the LOGO side up. View signal values in settings – positioning
2. Purchase a GPS amplifier online and pick it up in the car
3. Cars with sunroofs are easier to obtain signals

The product is stuck, what should I do?

• Factory settings can be restored. Steps: Settings – More Settings -System-Advanced-Reset options-Erase all data (factory reset)

What should I do if the product becomes hot?

• This product is an Android product, the working process is a lot of decoding, there will be a certain temperature, but please rest assured, this product does not have any flammable and explosive raw materials, please use it with confidence

Why does carplay sometimes not connect

1. Manually set up WiFi to connect carplay wifi
2. The phone does not click on “Use carplay”
3. Restart the phone

Why is there no signal when carplay WiFi is turned on?

• Carplay works by reverse data transmission over WiFi, so it cannot use WiFi networks. But you can use 4G network or Bluetooth network sharing (4G network requires device support)

Carplay/android auto use Caton?

• Settings – More Settings – Network and Internet – Hotspot and Tethering – WLAN Hotspot – Advanced – AP Band – 5.0GHz

Play music sound right?

• Settings-factory settings (password: 0789)-sound mode-select mode 1, remember to restart after selecting, mode 1, mode 2, mode 3, you can try all, choose the best one.

Time not updating?

1. After the product is connected to satellite positioning, obtain the satellite time
2. Get network time from the Internet
3. More Settings – System – Date and Time – Automatically Determine Date and Time – On

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>