CAMECHO C7200 Android 11 Car Stereo User Guide

May 15, 2024
CAMECHO

CAMECHO C7200 Android 11 Car Stereo

Product Information

Product Specifications:

  • Compatible with: BMW E46 1999-2005
  • Model: C7200

Product Usage Instructions

Disassembly:

  1. Use a pry bar to open the central control decorative trim.
  2. Unscrew the screws securing the CD player and disconnect the wiring to remove it.
  3. Pry open the air conditioning control panel, disconnect the cable, and remove it.
  4. Remove the storage compartment below the air conditioning control panel.
  5. Unscrew the screws securing the air vent beneath the air conditioner and lift it to remove the CD player base frame.

Installation:

  1. Reinstall the air conditioning control panel and storage compartment into the vehicle with proper wiring connection.
  2. Connect the new radio wires to the original car wiring and insert the new radio frame into position.
  3. Install the new radio, secure screws on both sides and reattach the central control decorative trim to complete the installation.

FAQ:

  • Q: What tools are required for disassembly?
    A: Wire, Protocol box, Installation tools as mentioned in the manual.

  • Q: What should I do if the wiring harness does not match during installation?
    A: Contact customer service to request the correct wiring harness before proceeding with installation.

  • Q: How do I ensure a proper installation?
    A: Make sure to follow the disassembly and installation steps carefully, ensuring correct wiring connections and secure screw placement.

For BMW E46 1999-2005/C7200
Central Control Disassembly and Operation Post-installation rendering.

TOOLS REQUIRED FOR DISASSEMBLY

  1. Wire
  2. Protocol box
  3. Installation tools

CAMECHO-C7200-Android-11-Car-Stereo-fig- \(1\)

Disassembly

  1. Use a pry bar to effortlessly open the central control decorative trim, then use a screwdriver to unscrew the screws on both sides securing the CD player. Disconnect the wiring, and remove the CD player.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(2\)
  2. Use a pry bar to pry open the air conditioning control panel, pull out the connecting cable, and remove the air conditioning control panel.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(3\)
  3. Pry open the storage compartment beneath the air conditioning control panel and remove it.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(4\)
  4. Unscrew the screws on both sides securing the air vent beneath the air conditioner, then gently lift the air vent upward to remove the CD player base frame.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(5\)

PROPOSE
Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car’s power is cut off during the installation.

Installation

If the wiring harness does not match, please contact customer service to request the correct wiring harness.

  1. Reinstall the air conditioning control panel and storage compartment back into the vehicle, and ensure proper wiring connection.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(6\)
  2. Connect the new radio wires to the original car wiring, gently lift the air vent, and insert the new radio frame into the corresponding position.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(7\)
  3. Install the new radio into the original vehicle, secure the screws on both sides with a screwdriver, and then reattach the central control decorative trim. The installation of the new radio is now complete.CAMECHO-C7200-Android-11-Car-Stereo-fig- \(8\)

COMPARISON

Effect of Installation

CAMECHO-C7200-Android-11-Car-Stereo-fig- \(9\)

GENTLE REMINDERS

Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact us and we will respond to you within 24 hours. Don’t worry; we will do our best to solve the problem for you until you are satisfied.

After-sales email: cheyang728@gmail.com.

WARN FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals