FINLUX PRO-888 Automatic Floor Vacuum Robot Wifi User Guide

ROBOT PRO-888 WIFI
Intelligent Fully Automatic Floor Vacuum Robot

Welcome

Dear Users:
Thank you for purchasing this robot vacuum cleaner. Hope you can enjoy it.
Please read this guide and safety instruction(Page 2) carefully before using this robot and keep it for further reference. Thank again for your choice.
Download “Smart Life” APP:
Please download the “Smart Life” APP from Apple Store or Google Play Store.
Internet Connection:
Open the APP, Tap”add device” and follow below instructions.
Press the recharging and on/off button for 3 seconds at the prompt, the robot is ready for connecting internet.

Safety Information

Warnings

1. The product should not be used by children under 8 years of age or persons with mental disabilities. If those people need to use it, please use it under the supervision. Please do not let children ride on the product or play with the product as a toy.
2. For the problems that may occur in the cleaning process, it should be eliminated in time. Clean the power cord and small items on the ground, avoid obstructing the product in the cleaning process, fold the fringe under the carpet, and make the curtains and tablecloths keep away from the ground.
3. If there is an overhanging environment such as stairs, please overhanging area without falling. Protective fence should be placed on the edge of the overhanging area to prevent the product from falling, and should ensure that the protective device will not cause personal injury such as tripping.
4. Use the product according to the user guide and only use accessories recommended or sold by the manufacturer.
5. Ensure that the power supply voltage conforms to the voltage marked on the docking station.
6. Use the product only in indoor/domestic . Do not use it in outdoors,  commercial and industrial areas.
7. Use only original rechargeable batteries and docking station provided by the manufacturer.
8. It is prohibited to  washthe product with water.
9. It is prohibited to wipe the product with a mop.
10. It is prohibited to use the product on the ground with water.
11. It is prohibited to use the product in an environment with spark or fragile objects.
12. It is prohibited to use the product in extremely hot (above 40°C) or extremely cold (below -5°C) environments.
13. The hair, clothes, fingers and other parts of the human body are prohibited from being near the opening and operating parts of the product.
14. It is prohibited to allow the product to vacuum items such as stones, waste paper, etc. that may clog the product.
15. It is prohibited to allow the product to vacuum any flammable materials, such as gasoline, printer or photocopy toner, etc. Do not use the product in areas with flammable materials.
16. It is prohibited to allow the product to vacuum any burning items such as cigarettes, matches, ashes, and other items that may cause a fire.
17.  It is prohibited to use the damaged docking station.
18. It is prohibited to drag or lift the product or docking station by the power cord. It is prohibited to use the power cord as a handle. It is prohibited to clamp the power cord in the door crack, and it is prohibited to pull the power cord at sharp cor- ners. Do not run the product on the power line, and the power line should be away from heat sources.
19. To avoid any danger, if the charging cord is damaged, it must be replaced by the manufacturer, or its professional mainte- nance organization.
20. Before using the product, please make sure that the dustbin and filter materials are installed properly.
21. Do not use the product in the room where the baby is sleeping.
22. Do not charge from a damaged power cord or outlet. Do not use the product when it does not work properly due to drop, damage, outdoor use, or flooding water. To avoid causing damage, the product should be repaired by the manufacturer or its after-sales service.
23. If you do not use the product for a long time, please power off the product.
24. Please power the robot off before cleaning and maintaining.
25. Please remove the charging plug from outlet before cleaning and maintaining the product.
26. Before disposing of the product, please remove the product from the docking station, turn it off, and remove the battery.
27. Before disposing of the product, remove and dispose of the battery in accordance with local laws and regulations.
28. Incineration of the product is prohibited even if the product has been severely damaged, which may cause the battery build-in product to explode.
29. Please use the product according to the user guide. The Com- pany is not responsible for any loss or injury caused by im- proper use.
30. Do not use the product to clean shag carpets (some dark car- pets may not be cleaned well).

Product Overview

2.1 Accessories List 2.2 Basic Parameter
Robot Vaccum Cleaner

Docking Station

Adapter Model| K12V190060C| K12V190060G|
---|---|---|---
Input| 100-240V  0.35A   Max 50/60Hz
Output| 19V    0.6A

Cautions
We reserve the right to change or fine tune the product without any notice.
2.3 Product Introduction

Name of parts

Cautions: If the water tank is filled fully with water, it may affect its performance of obstacle crossing and climbing.
Docking Station

Operation

3.1 Quick operation

Charging

1. Connect the adapter and docking station.
2. Put the docking station onto the ground against the wall and remove all objects around the station (1 meter radius,
3. Connect Power Supply.

Cautions:
The top Indicator light of the docking station turns on and last all the time after the docking station connected the adapter.
Charging

1. Put the robot onto docking station and connect the charging connector in right way.
2. The recharging indicator light in green is breathing during charging. After fully charged, the light will be on all the time.
3. Please charge the robot for 6 hours for Ist time use.

Operation

Cautions:

• Please keep cleaning of the charging connector to keep the best performance.
• Please place the robot onto docking station, and ensure the docking station plug in power supply.
• If the robot will not be used for a long time, please charge it fully.
• Press and hold the on/off button for 3 seconds to power off and keep it in a dry and ventilated place.

Power the robot on

• Press and hold the on/off button for 3 second to power the robot on, and press and hold the on/off button for 3 seconds again to power it off.

Cautions:

• It is suggested that do not turn the robot off, after finishing cleaning work, keep charging so that it is ready for anytime.
• If there is no operation for 10 min, the robot will enter into sleep mode, short press on/off button to wake it up.

Cleaning Mode
Power the robot on, and then short press the on/off button , the robot get started with auto cleaning mode.

Cautions:

• Before starting cleaning, ensure the indicator light of on/off button in green is on all the time. If the robot is sleeping, please short press on/off button to wake it up.
• You could set modes on APP.
• The robot will auto plan route. If you move the robot or operate via APP (except for pausing), it will re-plan the route, and may clean the cleaned area again. To ensure the efficient work, It is suggested that do not operate it during working (If the robot is moved, it will alarm and stop working. you need to press the on/off button or operate via APP to restart working).

Pause
Press on/off button or tap the “Pause” by APP to pause the robot during working. Cautions:
If there is no operation for 10 min, the robot will turn into sleep mode. After waking up, it will re-plan the route for cleaned area, and cannot continue to the last cleaning route.
3.2 Mode selection
You can select different cleaning modes via APP.
Auto Cleaning Mode
The robot starts with auto cleaning mode, plan the route, and auto detect uncleaned areas. Cautions:
The robot has auto plan route function during working. If user moves the robot or operate via APP (except for pausing), it will re-plan the route, and may clean the area already cleaned again.
To ensure the efficient work, It is suggested that do not operate it during working (If the robot is moved, it will alarm and stop working, you need to press the on/off button or operate via APP to restart working).
Recharging mode
The robot will auto locating the dock station to recharge when the battery is less than 20%. Area Cleaning
You can confirm the cleaning area via App to start Zig zag cleaning mode, it will clean the scheduled area around Im Im.
3.3 Operation of Water Tank and Mop
This robot is equipped with mop, after sweeping, you can fill the water tank with water and intall the mop, and then start to mop the floor. Please check the “Maintenance” section to understand how to maintain it
Cautions:
When you fill water with water tank, please disassemble it first.

• Please keep away the mop from the robot during charging.

Disassemble the 2 in 1 water tank
Press the button of water tank and slide back to take out the 2 in I water tank
Fill the Water Tank With Water
Open the cover of water tank and fill the water tank with water then tighten it Stick mop
Install mop
slide front, put the mop right to the slot, you can hear a voice of click

 Maintenance

4.1 Clean Dust Bin and Filter
Please power the robot off and keep it away from power supply when you clean up the robot or other components.

1. Disassemble the 2 in 1 water tank, open the cover of dust bag, take out the trash, and then clean it up.
2. Open the cover of dust box, take out the filter, dustproof sponge, clean it up, put it back into robot and install it.

Clean up mop
4.2 Clean Components of Mop
Disassemble:remove out thewhole component of mop fromthe robot, and disassemble the mop. Maintenance: wash and hang the mop out. Clean 2 in 1 water tank
Disassemble:Open the rubber plug of the tank and pour out  the water. Maintenance:Wipe dry the 2 in 1 water tank. 4.3 Check and Clean up Side Brush
Power the robot off and then remove out the side brush. Clean it with a tool. 4.4 Driving Wheel Checking
Please power the robot off and then clean the driving wheel.

4.5 Other Components
Clean universal wheel. Clean the tangled hair. Cleaning of sensor.Keep the sensor work at its most sensitive situation. Clean charging conenctor, please clean the bottom of robot and charging connector of dock station with dry mop. Cautions:

• If the robot will not be used for a long time or discharge fully. Please ac- tivate before using. The way to activate:place the robot onto docking station and charge it for 3 min, then take it out, and repeat this for 3 times, then charge it for 5-6 hours as normal.
• Please contact our after-sales service if you want to replace the battery.

4.6 Important Notices
Due to the complexity of the environment, the robot may miss out a cleaning area, in order to get a better experience, it is recommended that you insist on using every day, and remove  all objects before cleaning. Before using, please take away the power cords, mops, slippers, and other debris from ground. If the carpet in your home has a fringe edge, please fold he edge under the carpet in advance.  Please do not stand in narrow places such as thresholds and aisles to avoid missing out.
Before using every time, please put the furniture and debris such as tables and chairs neatly to make room for cleaning space.

Remove or cover the weight scale on the ground, floor fan base, and other low objects that may affect operation of the robot.
For first-time use, please open all doors, so that the robot is able to detect the whole house and create a map.

 After-sales Service

Dear Users:
In order to you can get the best after-sales service, please keep the purchase invoice properly, and it is repruired for any service request.
Notes for after-sales service
Guarantee Period

Accessory Guarantee Time

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>