FINLUX 43 Inch TV 43-FMAF-9060 User Guide

FINLUX 43 Inch TV 43-FMAF-9060

1. Insert the batteries into the Remote Control
   Remove the screw that secures the battery compartment cover on the back side of the remote control first. Lift the cover gently. Insert two 1.5V – size AAA batteries. Make sure the(+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with the same or equivalent type. Place the cover back on. Then screw the cover back on again.|
   REAR SIDE OF THE TV

2. Connect the antenna to your TV

3. Connect the TV to the mains socket

4. Switch the TV on
   After plugging the power cable into the main socket outlet the TV will switch on automatically. If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either;

5. Press the Standby button on the remote control.

6. Press the center of the control switch on the TV.

7. Initial Setup Wizard
   When turned on for the first time, a search for accessories will be performed before the initial setup starts. Follow the on-screen information to pair your remote control and other wireless accessories with your TV. Press Exit to end adding accessories and start the setup.”Welcome” message will be displayed along with the language selection options listed on the screen. Select the desired language from the list and press OK to continue. Follow the on-screen instructions to complete the initial setup process. Use the directional buttons and the OK button on the remote to select, set, confirm and proceed.
   Note: For detailed information and instructions on the initial setup process refer to the instruction Book of this TV.

8. Change the Input Source
   If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. Use a suitable cable to connect two units together. Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively or use the directional buttons and then press the OK button to switch to different sources when in Live TV mode. Besides this, you can switch to the desired input source by selecting the desired option from the Inputs menu on the Home Screen or TV options >Source menu in Live TV mode.

9. Connect your TV to the Internet
   Wireless Connection
   A wireless LAN modem/router is required to connect the TV c: to the Internet via wireless LAN. Highlight the Wi-Fi option in the .2 Network & Internet menu and press OK to enable wireless O connection. Available networks will be listed. Highlight your network from the list and press OK to connect. You may be asked to enter a password to connect to the selected network,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>