SIGMA 20108003 Buster 800 HL Helmet Lamp Instruction Manual

SIGMA 20108003 Buster 800 HL Helmet Lamp

INFORMATION

EN SIGMA-ELEKTRO GmbH hereby declares that the BUSTER 800 HL comply with the fundamental requirements and other relevant regulations of Directive 2014/30/EU and RoHS Directive 2011/65/EU. You can fi nd the CE declaration at: ce.sigmasport.com/buster800hl

ACCESSOIRES

MONTAGE-OPTIE

MONTAGE

5 MODE

LICHT-MODUS GEHEUGENFUNCTIE

VOORINGESTELDE LICHT-PROFIELEN

ACCUR-INDICATOR

OPLAADINDICATOR

LAADPROCEDURE

SPECIFICATIONS

• Temperature:  +10 °C à +45 °C
• Type de batteries:  3,7 V, 3500 mAh
• maximum voltage: 3 W

FCC DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any inter-ference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifi cations not expressly approved by the party responsible for compliance. Such modifi cations could void the user’s authority to operate the equipment.This equipment should be installed and operated with a minimum distance of
5 millimeters between the radiator and your body.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

UKCA STATEMENT

We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards, in accordance with the Electromagnetic Compatibility Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The test record, data evaluation and Equipment Under Test (EUT) confi gurations represented herein are true and accurate under the standards herein specifi ed.

References

• ce.sigmasport.com/buster800hl
• goto.sigmasport.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>