Hisense BR0019 Bluetooth Remote Control Owner’s Manual

Hisense BR0019 Bluetooth Remote Control

Product Usage Instructions

Power On/Standby and Menu Navigation
To power on or standby the device, press the Power button. Use the Menu button to enter the menu interface.

Bluetooth Remote Pairing
To pair the Bluetooth remote, press and hold the Pair button until the pairing process is completed.

Navigation and Controls
Use the D-pad for up, down, left, and right navigation. The Return button takes you back to the previous place in the menu or app. Volume control is done using the dedicated buttons.

Quick Access and Special Functions
Quickly access apps with the designated buttons. Change input sources, activate the microphone, enable auto focus, and confirm actions using the respective buttons.

Home Screen and Audio Controls
Display the Home screen by pressing the Home button. Adjust brightness, mute or restore sound using the corresponding buttons.

FAQ

• Q: Can I use the remote with multiple devices?
  A: The remote is typically paired with one device at a time to ensure seamless functionality. It is recommended to pair it with only one compatible device.

• Q: How do I know if the remote needs new batteries?
  A: If the remote becomes unresponsive or has a reduced range, it may be time to replace the batteries. Refer to the user manual for battery replacement instructions.

• Q: What should I do if the remote stops working?
  A: Check if the batteries are properly inserted and have charge. Try re- pairing the remote with the device. If issues persist, contact customer support for further assistance.

Use Your Remote

1. Power on/Standby

2. Press to enter Menu
   Press and hold to pair the Bluetooth remote

3. D-pad (up/down/left/right navigation buttons)

4. Return to the previous place in the menu or app

5. Volume (up/down)

6. Quick access buttons to apps

7. Change input source

8. Activate the microphone

9. Press to enable auto-focus

10. Confirmation button

11. Input numbers and special function buttons

12. Display the Home screen

13. Adjust brightness

14. Press to Mute or restore the sound

NOTE

• Backlight function: The backlight turns on after pressing the remote button, and goes off if no operation for 5 seconds.
• Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment.
• The remote control can work at a distance of up to 8 metres in front of the device.
• The remote control is a wireless device, so its signals may be interfered and blocked.

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.

IC warning statements:
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device.” The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specifc absorption ratio (SAR).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>