Vention VWS-E44 Wireless Bluetooth Earbuds User Manual
- May 15, 2024
- VENTION
Table of Contents
Vention VWS-E44 Wireless Bluetooth Earbuds
Introduction
The True Wireless Bluetooth Earbuds feature cutting-edge technology to deliver premium sound quality and great noise-cancelling performance. Real-time audio processors and high-performance mics power the specially designed driver unit, for wide frequency reproduction, deep bass and clear vocals. They are designed to immerse you in a sound so good, it feels like you’re in the studio with your favourite artists.
Specifications
Operating instructions
-
Power on
a. When the charging case opens, the earbuds power on.
b. When powered off, press and hold the MFB (Multi-Function Button) on either the left or right earbuds for seconds. The indicator light will illuminate blue for seconds, and the voice guidance will say, “Power on.” -
Pairing and connection
a. Earbuds are ready to pair right out of the charging case.
b. Open the Bluetooth menu on your device. In the list of discovered Bluetooth
devices, tap or click your Vention T 13. You will hear the voice guidance say,
“Connected.”
Note : If you hear “Disconnect’ and the earphones are not reconnected within 5 minutes, they will automatically power off. The Noise-Canceling Mode won’t exit due to disconnection.
Contents
For more interesting information and events, please follow us on social media platforms:
For warranty service or support, please contact Vention team: Website:
www.ventiontech.com
Email: vention@ventiontech.com
Power off
Auto power off
- a. The earbuds will automatically power off after 5 minutes of not being connected.
- b. When the earbuds are not paired with the phone due to the long distance, it will automatically power off if it is not connected for more than minutes and 30 seconds.
Manual power off
- a. Earbuds automatically power off when placed back in the charging case with the lid closed.
- b. When it is connected, press and hold either the left or right MFB (Multi-Function Button) for 5 seconds until you hear “power off.”
Phone mode
Music mode
Mode switching
Using the voice assist function
When the phone is on standby, tap the multi-function button 3 times(left)to
activate or stop your voice assistant(deactivation only supported on Apple
phones).
Status lights
- Low battery warning: Red light flashes every 5 seconds and every 3 minutes, you will hear the voice guidance say, ‘battery low.”
- When charging : The indicator lights up in red. The indicator turns off after charging is complete.
Clear the Earbuds device list
In a single-ear unpaired state, tap the multi-function button four times.
Youll hear “beep beep beep beep + power off,” indicating that the Bluetooth
devices list has been cleared and the earbuds will power off.
Declaration on toxic or hazardous substances and elements contained in
electronic products
The True Wireless Bluetooth Earbuds feature cutting-edge technology to deliver
premium sound quality and great noise-cancelling performance. Real-time audio
processors and high-performance mics power the specially designed driver unit,
for wide frequency reproduction, deep bass and clear vocals. They are designed
to immerse you in a sound so good, it feels like you’re in the studio with
your favourite artists.
Important safety instructions
Please read all instructions and warnings before using this product. Inappropriate use will cause damage to the product or personal safety.
- Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment; do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
- Improper use of the product can easily cause product damage or mey endanger personal and property safety.
- If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
- Non-professionals are strictly forbidden to disassemble this product. 5. Use this product only with an agency-approved power supply that meets local regulatory requirements.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the useds authority to
operate the equipment.
NOTE 3: The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition without
restriction.
FCC ID: 2A7Z4-N3N