VENTION USB Car Bluetooth 5.0 Audio Receiver with Coiled Cable 1.5M Gay Zinc Alloy Type Instruction Manual
- June 5, 2024
- VENTION
Table of Contents
VENTION USB Car Bluetooth 5.0 Audio Receiver with Coiled Cable 1.5M Gay
Zinc Alloy Type
Product Description
This product is applicable to phone, tablet and other devices with Bluetooth function. It can achieve the bluetooth audio transmission function by connecting to the speaker devices such as car speaker with 3.5mm audio port.
Product Parameters
- Model: NAG series
- Color: Gray
- Interface type: USB 2.0/TRS 3.5mm
- Interface technics: Nickel-plated
- Shell: Zinc alloy
- Conductor: Enameled copper
- Jacket: PU
- Bluetooth version: 5.0
- Bluetooth protocol: A2DP/HFP
- Audio decoding format: SBC/AAC
- Transmission distance: 10m barrier-free transmission
The Interface Display
- USB 2.0 interface
- Microphone, indicator light
- 3.5mm audio interface
Instructions
Bluetooth pairing
For the first time use, start car’s engine and insert this product into car’s
USB or AUX port, auto power on and pairing status will be initiated.
Turn on the bluetooth function of user’s phone, find the device “Vention- NAG”
and connect it.
Product will automatically connect to user’s phone once the engine is started
and bluetooth function is on for the future use.
Warm tips:
Replug the product, restart the bluetooth function and repeat the pairing
processes when engine is started if it fails to connect in 5min in pairing
status.
Disconnection
Turn off the bluetooth function on your phone or exceed the transmission distance for audio disconnection. Auto disconnection after engine is shut down.
Auto pairing
This product will automatically pair with the device that was connected last
time.
Indicator light
Here is the indicator status for related working stat:
LEO STATUS
| FLASH FREQUENCY
( SEC / TIME )
|
WORKING STATUS
---|---|---
Always on| | Power On
Flash| 10/1| Connected
Flash| 1/2| Pairing
Fast Flash| 10/2| Music Playing
Flash| 10/1| Music Paused
Flash| 10/2| Phone Call/Navigation
For more interesting information and events, please follow us on social media
platforms:
For warranty service or support, please contact Vention team:
Website: www.vention.cn
Email: vention@vention.cn
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE1:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Packing List
Notes
- It is recommended to remove the product from the interface when not using the product during the driving.
- Do not place this product under the direct sunlight such as under the windshield, etc.
- This product utilizes the wireless signal for transmission, please make sure that other devices in this environment will not be affected.
- To avoid the damage, please do not put this product under strong shock or vibration environment.
- Please avoid the usage of this product in extreme high or low temperature and humid environment.
- Store this product in dry, dust-free, small temperature variation environment when users are in long time no use of this product.
- Please do not use strong chemicals, detergents or strong detergents to clean this product.
- Please place it out of the reach of children.
- It is forbidden to disassemble, hit, squeeze the product or put it into the fire.
- It is forbidden to use this product around magnets or environments with strong magnetic fields to avoid malfunction or damage to the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>