Touch Controls DI-PS Partition Sensor Instructions
- August 22, 2024
- Touch Controls
Table of Contents
Touch Controls DI-PS Partition Sensor
Product Specifications
- Product Name: Partition Sensor
- Model Number: DI-PS
- Power Input: 12VDC
- Cable Types: CAT 5 (Minimum)
- Maximum SmartNet Length: 400
PARTITION SENSOR MOUNTING
THE PARTITION SENSOR MUST BE IN LINE WITH THE REFLECTOR AND WITHIN 10′ OR LESS.
PARTITION SENSOR WIRING
TIPS / NOTES
- ONCE THE DIGITAL INPUT INTERFACE (DI) IS POWERED ON VIA THE SMARTNET, THE PARTITION SENSOR AND DI CAN BE TESTED.
- IF WIRED CORRECTLY THE PARTITION SENSOR WILL HAVE A VISIBLE RED LED.
- THE REFLECTOR CAN THEN BE MOVED IN FRONT OF THE SENSOR. THIS SHOULD CAUSE AN
- AUDIBLE CLICK INSIDE THE DI. IF CLICK IS NOT HEARD, VERFIY WIRING.
- PARTITION SENSOR ONLY FUNCTIONS WITH THE ROOM MANAGER.
Installation
- Ensure the Partition Sensor is mounted in line with the reflector and within 10 feet or less.
- Connect the Digital Interface (DI) following the wiring instructions provided.
- Power on the Digital Input Interface (DI) via SmartNet for testing.
Testing
- Once powered on, check for a visible red LED on the Partition Sensor.
- Move the reflector in front of the sensor to trigger an audible click inside the DI.
- If no click is heard, verify the wiring connections.
Compatibility
The Partition Sensor only functions with the Room Manager system.
Contact Information
For further assistance, contact Touche Controls at:
Telephone: 888.841.4356
Website: ToucheControls.com
Frequently Asked Questions
Q: What should I do if the Partition Sensor LED does not light up?
A: Verify the power supply and wiring connections to ensure correct
installation.
Q: Can the Partition Sensor be used without the Room Manager?
A: No, the Partition Sensor requires the Room Manager system for
functionality.
Touché Lighting Controls (a Product of ESI Ventures) A: 2085 Humphrey Street, Fort Wayne, IN 46803 T: 888.841.4356 W: ToucheControls.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>