Facmogu AL-1210 Power Adapter User Manual
- August 21, 2024
- Facmogu
Table of Contents
Facmogu AL-1210 Power Adapter
INTRODUCTION
If you need to run a lot of different electronics, like cameras and printers, the Facmogu AL-1210 run Adapter is a reliable and flexible choice. With a 12V output and a 1A current rate, this small and light adapter makes sure that your devices always have a safe power source. With a recognized name in electronic accessories, Mo-gu making the AL-1210 since July 2023 , it has quickly become a popular choice for people looking for a reliable and affordable power source. At just $9.99 , this adaptor is a great deal for the quality it offers. You can use it at home or in the office. The Facmogu AL-1210 works with many devices thanks to its barrel connector and male-to- male design. This makes sure that your tools are always ready to go when you need them.
SPECIFICATIONS
| Brand | Facmogu |
|---|---|
| Connector Type | Barrel Connector |
| Compatible Devices | Cameras, Printers |
| Input Voltage | 240 volts |
| Connector Gender | Male-to-Male |
| Power Source | AC |
| Specification Met | MFI |
| Output Voltage | 12 volts |
| Cable Length | 35.0 inches |
| Current Rating | 1 amp |
| Product Dimensions | 6.5 x 9 x 0.39 inches |
| Item Weight | 2.82 ounces |
| Item Model Number | AL-1210 |
| Manufacturer | Mo-gu |
| Price | $9.99 |
WHAT’S IN THE BOX
- Power Adapter
- Manual
PRODUCT DIMENSIONS
FEATURES
- Dual Plug Compatibility: It works with both 5.5×2.5mm and 5.5×2.1mm plugs, so you can use it with a lot of different products.
- Low-Power Design: It gives off a controlled 12V DC and can handle up to 1A (1000mA) of current, making it good for devices that need low power.
- Compact and Lightweight: The design is small and light so it’s easy to carry and use in small places.
- Wide Input Voltage Range: It can work with 100V to 240V AC inputs at 50/60Hz, which is the same as power standards around the world.
- Built-in safety: It has safety against over-voltage, over-current, and over-temperature to make sure it works safely.
- Standard DC Plug: It comes with a 5.5 mm OD, 2.5 mm ID DC plug and works with 5.5 x 2.1 mm sockets, so it can be used for a variety of connections.
- Regulated Output: Provides a steady 12V DC output to keep the power source steady and shield connected devices from changes in voltage.
- cord Length: The cord is only 89 cm (2.92 feet) long, which is short enough to fit in most setups and easy to handle.
- With UL certification, you know that the adapter meets safety standards and works reliably.
- Intended for use indoors only: Made for indoor use only, making it perfect for controlled settings.
- Power Supply Polarity: The center or tip is positive (+) and the sleeve is negative (-). This makes sure that devices that are suitable have the right polarity.
- Not for High-Power Devices: This adapter is only for devices that need up to 12W of power; it’s not good for devices that need more than 1A.
- Easy to Use: It has a simple plug-and-play design that makes it easy to use without having to go through a lot of complicated setups.
- Energy-efficient: Made to change power quickly and efficiently with little energy loss, which helps save energy generally.
- Durable Construction: Made with high-quality materials that will last and work well in a variety of situations.
SETUP GUIDE
- Check Device Compatibility: Make sure your device needs a 12V DC input and can handle up to 1A (1000mA) of current to avoid overloading.
- Check Voltage and Current: Make sure that the power adapter’s output (12V DC and 1A) meets the needs of your device.
- Choose the Right Plug: Depending on the type of socket on your device, use the right 5.5×2.5mm or 5.5×2.1mm plug.
- To connect the adapter, carefully plug the DC plug into the device’s power port.
- Plug into Power Source: Plug the adapter’s AC plug into a regular wall jack.
- Check the Polarity: Make sure the power source has the right polarity, with the center or tip being positive (+) and the sleeve being negative (-).
- Check for Loose Connections: To avoid power problems that come and go, make sure all of the connections are tight.
- If you don’t want to damage the adapter or the device you’re connecting it to, don’t connect devices that need more than 1A.
- Positioning: Put the adapter somewhere with good airflow to keep it from getting too hot while it’s working.
- Check out the Setup: Turn on your device to make sure it works right with the adapter plugged in.
- Cable Management: If you need to, use cable organizers to keep the adapter and cords neat and to keep the connectors from getting too much physical stress.
- Check the Adapter: Before using the adapter, make sure it is safe and that it works right by looking for any damage that you can see.
- Keep the adapter inside at all times to protect it from wetness and extreme temperatures.
- Power Source Compatibility: Make sure the power source works with the adapter’s voltage range (100–240V AC).
- Please check the adapter for signs of wear and tear on a regular basis and change it if it does.
CARE & MAINTENANCE
- Regular Checks: Look over the adapter every so often for any signs of damage or wear.
- Keep Dry: To keep the adapter safe from electrical damage and dangers, don’t let water or other liquids touch it.
- Good Airflow: Make sure you use the adapter in a room with good airflow to keep it from getting too hot.
- Avoid Overloading: To keep the adapter safe and lasting a long time, do not go over the 1A current limit.
- Handle Carefully: Be careful not to damage the connectors and internal parts by rough handling the adapter and wires.
- Clean Often: Use a dry, soft cloth to wipe the adapter clean of dust and dirt. Do not use acids or cleaners that are rough.
- Plug It In When Not In Use: When not in use, disconnect the charger from the power source to keep it from wearing out and using too much energy.
- Cable Management: To avoid stress and damage, keep the cords neat and untangled.
- Don’t leave the adapter out in the elements; instead, keep it somewhere cool and dry when not in use.
- Check the cords: Make sure to check the power cords often for damage or fraying, and replace them if needed.
- Avoid Extreme Temperatures: Do not put the adapter in places that are very hot or very cold; this can damage it and make it less safe.
- Correct Plug Type: To keep your devices from breaking or not connecting properly, always use the right plug size and type.
- Avoid Physical Stress: Make sure the adapter isn’t under a lot of physical tightness or stress, as this could damage the parts inside.
- Check for Firmware Updates: If your device has one, make sure the firmware is up-to-date so it works with the power charger.
- To be safe, stop using the adapter if it shows signs of internal damage or failure and get a new one.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| The adapter not powering the device | Loose connection | Ensure all connections |
are secure
Device intermittently loses power| Faulty power outlet| Test the adapter on a
different outlet
Adapter overheating| Inadequate ventilation| Place the adapter in a well-
ventilated area
No power output| Blown internal fuse| Replace the adapter
Slow charging or power supply| Insufficient current output| Ensure the
device’s power requirements match the adapter
Unusual noise from the adapter| Electrical interference| Keep the adapter away
from other electronics
The adapter does not fit securely| Incorrect connector size| Verify the
connector type and size
Frequent disconnections| Damaged cable| Inspect and replace the cable if
necessary
The device not turning on| The power adapter is not properly connected|
Double-check the connections and try again
The adapter gets hot but no power| Internal fault| Replace the adapter
The power indicator not working| The adapter is not plugged in correctly|
Reconnect the adapter and ensure it’s fully inserted
Device power fluctuates| Unstable power supply| Use a surge protector or
stabilize the power source
Adapter cord fraying| Regular wear and tear| Replace the power cord
The adapter fails under load| Overload on the adapter| Reduce load or switch
to a higher capacity adapter
No response from the connected device| Incompatible device| Verify device
compatibility with the adapter
The adapter stops working suddenly| Overheating protection triggered| Allow
the adapter to cool down before reuse
PROS & CONS
Pros:
- Compact and lightweight design for easy portability.
- Affordable price without compromising on quality.
- Compatible with a variety of devices, including cameras and printers.
- Reliable 12V output ensures a steady power supply.
- Easy to use with a simple plug-and-play setup.
Cons:
- Limited to 1A current, may not be suitable for high-power devices.
- Short cable length may not meet all setup requirements.
- No built-in surge protection.
- Limited to specific connector types, and may not fit all devices.
- Lack of additional features such as LED indicators.
WARRANTY
The Facmogu AL-1210 Power Adapter comes with a standard 1-year limited warranty from the date of purchase. This warranty covers any defects in materials or workmanship under normal use conditions. If the product malfunctions or fails within the warranty period, Mo-gu will repair or replace the adapter free of charge. To make a warranty claim, customers must provide proof of purchase and contact Mo-gu’s customer service team for further assistance. The warranty does not cover damage caused by misuse, accidents, or unauthorized alterations to the product.
FREQUENTLY ASKED QUESTIONS
What is the price of the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter is priced at $9.99.
What is the input voltage for the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter operates with an input voltage of 240 volts.
What is the output voltage of the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter provides an output voltage of 12 volts.
What is the current rating of the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter has a current rating of 1 amp.
What is the cable length for the Facmogu AL-1210 Power Adapter?
The cable length for the Facmogu AL-1210 Power Adapter is 35.0 inches.
What type of connector does the Facmogu AL-1210 Power Adapter use?
The Facmogu AL-1210 Power Adapter uses a barrel connector with a male-to-male configuration.
What power source does the Facmogu AL-1210 Power Adapter use?
The Facmogu AL-1210 Power Adapter uses AC power.
What specification does the Facmogu AL-1210 Power Adapter meet?
The Facmogu AL-1210 Power Adapter meets MFI specifications.
What are the dimensions of the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter measures 6.5 x 9 x 0.39 inches.
How much does the Facmogu AL-1210 Power Adapter weigh?
The Facmogu AL-1210 Power Adapter weighs 2.82 ounces.
What devices are compatible with the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter is compatible with cameras and printers.
What is the item model number for the Facmogu AL-1210 Power Adapter?
The item model number for the Facmogu AL-1210 Power Adapter is AL-1210.
What are the key features of the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter features a male-to-male barrel connector, MFI specification compliance, and is designed for AC power.
What is the power source for the Facmogu AL-1210 Power Adapter?
The Facmogu AL-1210 Power Adapter is powered by AC.
Does the Facmogu AL-1210 Power Adapter come with short-circuit protection?
The specifications provided do not indicate short-circuit protection for the Facmogu AL-1210 Power Adapter.