Facmogu 298A Wireless Bluetooth 5.0 Stereo Audio Amplifier-Complete Features/User Manual

: June 5, 2024
: Facmogu

Table of Contents

Facmogu

Facmogu

Facmogu 298A Wireless Bluetooth 5.0 Stereo Audio Amplifier

Facmogu-298A-Wireless-Bluetooth-5.0-Stereo-Audio-Amplifier-
imgg

Specifications

BLUETOOTH: 5.0
PEAK MUSIC POWER OUTPUT: 300W x 2 P.M.P.O
INPUTS: 6
AMPLIFIER SIZE: 7×5.4×2″ / 18×13.8×5.5cm
WEIGHT: 2.4pounds/1.1kg
USB INPUT: 2.0
PRODUCT DIMENSIONS: 3.94 x 3.94 x 2.76 inches
ITEM WEIGHT: 2.64 pounds

Introduction

The 2-channel Bluetooth 5.0 stereo amplifier receiver with built-in transformer and US plug offers 300W x 2 P.M.P.O, which is ideal for your karaoke and home theatre acoustic sound system. The digital amp box has USB/SD card/FM Radio/Bluetooth/2 1/4inch microphone IN and RCA (R, L) audio inputs for tuner, CD player, tape deck, and other external sources. Amplifier dimensions are 7×5.4×2″ / 18×13.8×5.5cm, and it weighs 2.4 pounds (1.1 kg). A USB/SD card input on the sound-boosting mixer gadget allows you to use flash drives or SD cards. When you connect your computer directly to the amp, you can play your favorite audio files from your computer’s media collection. Recommend for home theatre audio, computer gaming audio, tower speakers, and garden speakers. Small, small design for automobile audio system as well.

HOW IT WORKS

By utilizing Bluetooth technology’s radio frequency transmission, a Bluetooth amplifier can transform your favorite pair of wired headphones into wireless Bluetooth headphones.

HOW TO CONNECT SPEAKERS TO AMP

Connect the rear of the amplifier to the speaker wire’s end.
The speaker wire must be connected to the speaker.
You can now plug the amplifier into the power supply and listen to your speakers provided the speaker and amplifier are properly connected.

HOW TO CONNECT PHONE TO AMP

Open the Settings app on your device.
Tap Sound Amplifier, then Accessibility.
Open Sound Amplifier by tapping it.
Tap OK to accept the permissions.
Change your Sound Amplifier shortcut if you want to.
Connect your device to wired or Bluetooth headphones.
There are more stuff…

HOW TO USE SOUND AMPLIFIER ON ANDROID

Open the Settings app on your device.
Tap Sound Amplifier, then Accessibility.
Use the service button.
Tap OK to accept the permissions.
Connect your device to wired headphones.
Swipe up with two fingers or tap the Accessibility button to start Sound Amplifier.

Frequently Asked Questions

Do you require a Bluetooth speaker amplifier?
Because Bluetooth headphones transmit power to the drivers internally, they will never require an amplifier. Editor’s note: On June 14, 2021, this page was amended to include more technical details.
Do amplifiers have Bluetooth capabilities?
Modern amplifiers with built-in Bluetooth connectivity allow you to stream music directly to your Bluetooth amplifiers. This eliminates the need for a costly speaker system. All you have to do is pair them with a Bluetooth- enabled device such as your laptop, smartphone, or tablet.
What is the maximum number of speakers that can be connected to an amplifier?
The majority of amplifiers can handle a load of two speakers. Similar to a passenger on a small motorcycle: adding second passenger doubles the load the vehicle must carry, but most motorcycles can handle two passengers. Adding more than two speakers, on the other hand, will usually overload the amplifier.
Is it possible to utilize amplifiers as speakers?
Yes, a guitar amp may be used as a speaker to play music or to put in a microphone. While a guitar amp won’t sound as nice as a dedicated music system, when done correctly, it can produce acceptable results.
Is it possible to connect two speakers to a single channel?
If you wish to power two speakers with a single-channel amplifier, the first step is to figure out the amplifier’s output impedance and the impedance of your speakers. The amplifier’s output impedance should ideally match the impedance of the speakers.
How do I link my amplifier to the internet?
To switch the amplifier from AP Mode to Wi-Fi Mode after saving the Wi-Fi settings, press the Wi-Fi button on the back panel of the amplifier. The amplifier is in Wi-Fi mode when the Wi-Fi button LED is “Green.” The Wi-Fi network will now be accessible to your amplifier.
Is Bluetooth capable of stereo transmission?
A Bluetooth adapter can be used to play music from your smart device on any stereo having either an analogue or digital audio out. To be compatible with most stereo systems, most Bluetooth audio receivers have both of these connections. Analog gadgets work by transferring data via electricity.
How do amplifiers function without them?
Explanation: Because the additional power is supplied by an external source, usually a DC battery or equivalent, the Law of Conservation of Energy is not broken.
Is it true that an amplifier increases the volume of a speaker?
Amplifiers can make your speakers sound worse, much like costly “audiophile” wires, but they can’t make them sound better. They are adding distortion to the signal if they do anything other than amplify it.
What is the purpose of an amplifier?
An amplifier boosts a weak audio signal in both home and automotive audio systems. When the signal going into the amplifier isn’t strong enough to drive speakers, the signal coming out can help. The volume and distortion-free sound of an amp is determined by its power.