vtech RM7766HD 7 Inch HD Wi Fi Video Baby Monitor User Guide
- August 27, 2024
- vtech
Table of Contents
vtech RM7766HD 7 Inch HD Wi-Fi Video Baby Monitor
Specifications
- Model: RM7766HD
- Product Name: 7 HD Wi-Fi Video Baby Monitor with Pan & Tilt Camera
- Parent Unit Output: 5V DC 2A
- Baby Unit Output: 5V DC 1A
- Rechargeable Battery: 3.7V 5000mAh, 18.5Wh Lithium-ion
Important Safety Instructions
Before using the HD Video Baby Monitor, please read and follow these important safety instructions:
- Ensure the baby unit is placed securely on a stable surface.
- Do not use the monitor near water sources like baths or sinks.
- Use only the provided adapters to avoid damaging the product.
- Keep power cords away from walking areas or places where they can be crimped.
- Avoid overloading wall outlets or using extension cords.
Setup and Installation
Follow these steps to set up your HD Video Baby Monitor:
- Place the baby unit in the baby’s room and the parent unit in your desired location.
- Connect the power adapters to the respective units and plug them into power outlets.
- Follow the pairing instructions provided in the user manual to connect the units.
- Adjust the camera angle using the pan and tilt features for optimal viewing.
Operation
Once set up, here are some operational tips:
- Use the monitor to check on your baby remotely via the HD video feed.
- Adjust volume settings on the parent unit to hear sounds from the baby unit clearly.
- Utilize additional features like night vision or two-way communication as needed.
Frequently Asked Questions
Q: Can I use the baby monitor as a medical device?
A: No, this product is not intended for use as a medical monitor. It is
designed for general monitoring purposes only.
Q: How do I clean the baby monitor?
A: Unplug the monitor before cleaning. Use a damp cloth for cleaning; do not
use liquid or aerosol cleaners.
Q: Can I use third-party adapters with this product?
A: No, always use the adapters provided with the product to prevent damage.
Important safety instructions
The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and injury, including the
following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above.
4. This product is intended as an aid. It is not a substitute for responsible
and proper adult supervision and should not be used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to a bath, sink,
swimming pool or shower.
7. CAUTION: Use only the battery provided. There may be a risk of explosion
if a wrong type of battery is used for the parent unit. The battery cannot be
subjected to high or low extreme temperature and low air pressure at high
altitude during use, storage transportation. Disposal of battery in fire or a
hot oven, mechanically crushing or cutting the battery can result in an
explosion. Leaving the battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of flammable liquid of
gas. Battery subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose of used battery
according to the in instructions.
8. Use only the adapters included with this product. Incorrect adapter
polarity or voltage can seriously damage the product.
Power adaptor information: Parent unit output: 5V DC 2A VTech
Telecommunications Ltd. Model: VT07EEU05200 (EU) Baby unit output: 5V DC 1A
VTech Telecommunications Ltd. Model: VT05EEU05100 (EU)
Rechargeable battery information: 3.7V 5000mAh, 18.5Wh Lithium-ion battery
Zhuhai Great Power Energy Co., Ltd. Model: GSP806090-5Ah-3.7V-1S1P
9. The power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet (power adapter) should be
installed near the equipment and should be easily accessible.
11. Unplug this product from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
12. Do not modify the power adapters or replace with other adapters, as this
causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not install this
product where the cords may be walked on or crimped.
14. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply in your home, consult your retailer or electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand or other
unstable surfaces.
17. This product should not be placed in any area where proper ventilation is
not provided. Slots and openings in the back or bottom of this product are
provided for ventilation. To protect them from overheating, these openings
must not be blocked by placing the product on a soft surface such as a bed,
sofa or rug. This product should never be placed near or over a radiator or
heat source.
18. Never push objects of any kind into this product through the slots
because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the product.
19. To reduce the risk of electric shock, do not disassemble this product,
but take it to an authorised service facility. Disassembling or removing parts
of the product other than via the battery door may expose you to dangerous
voltages or other risks. Incorrect reassembling can cause electric shock when
the product is subsequently used.
20. You should test the sound reception every time you turn on the units or
move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain electronic
devices, such as baby monitors, cordless telephones, etc. To protect your
privacy, make sure the product has never been used before purchase, reset the
baby monitor periodically by powering off and then powering on the units, and
power off the baby monitor if youare not intending to use it for some time.
23. Children should be supervised to ensure that they do not play with the
product.
24. The small parts of this monitor can be swallowed by babies or small
children. Keep these parts out of reach of children.
25. The product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
· Use and store the product at a temperature between 0oC and 40oC.
· Mishandling batteries can cause burn, fire or explosion hazards.
· Batteries should not be exposed to excessive heat such as bright sunshine or
fire.
· Do not expose the product to extreme cold, heat or direct sunlight. Do not
put the product close to a heating source.
What’s in the box
Overview
Parent unit overview
Warning–Strangulation Hazard–Children
have STRANGLED in cords. Keep this cord out of
the reach of children (more than 0.9m away). Do
not remove warning label on the adapter cord.
· Never place the baby unit inside the baby’s cot or playpen. Never cover the baby unit or parent unit with anything such as a towel or a blanket.
· Other electronic products may cause interference with your camera unit. Try installing your camera unit as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a
multidisciplinary evaluation of the interference between portable wireless
devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
· Should keep wireless devices at least six inches from the pacemaker.
· Should NOT place wireless devices directly over the pacemaker, such as in a
breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from
other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user’s manual, the product is safe to be used based on scientific evidence
available today.
3
What’s in the box
Your HD video monitor package contains the following items. Save your sales
receipt and original packaging in the event warranty service is necessary.
Quick start guide
x 2
x 2
Requirements
For mobile access: MyVTech Baby Pro mobile app Network Wi-Fi router
Internet connection
Wi-Fi 2.4GHz 802.11 b/g/n
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit
4
Overview
Baby unit overview
1 2 3 4 5
9
10 11
6
1
Light sensor
2 Camera lens
3 Infrared LEDs · Allow you to see clearly in a dark environment.
4 Microphone
5 Night Light
7
6
Night Light Control Key
· Go to Night Light section to learn more.
8 7 LED indicator · Red is steadily on when the baby unit is connecting to the
parent unit in direct mode.
· Green is steadily on when the baby unit is connected in Wi-Fi router mode.
· Red flashing slowly during video streaming in direct mode.
· Green flashes slowly during video streaming in Wi-Fi router mode.
8 ON/OFF switch · Power it on or off.
9 Speaker
10 Temperature sensor
11 Power jack
12 Wall mount slots
13 PAIR
12
· The parent unit and baby unit provided
are already paired.
· Reset the baby unit to factory default.
1. Press and hold PAIR key until you
13
hear a beep sound.
2. Release the PAIR key, and then press
the PAIR key again five times until
you hear another beep sound.
3. The baby unit will sound another
beep when the reset completes. Then, the baby unit will reboot.
5
Parent unit overview
1
2 3
11 4 5 6 12
7
13
15
8
9 14
10
1
LINK LED light
· On when the parent unit is linked to the baby unit.
· Flashes when the link to the baby unit is lost.
2
LED light
· On when the parent unit is connected to AC power, and the battery is charging.
· Flashes when the parent unit battery is low and needs to be charged.
3 3- level sound indicator light
· Green: low sound level is detected by the baby unit.
· Green and amber: moderate sound level is detected by the baby unit.
· Green, amber and red: high sound level is detected by the baby unit.
4
/
· Press and hold to talk to the baby unit.
· While in a sub-menu, press to exit.
5
Menu/Select
· Press to enter the main menu.
· While in a menu, press to choose an item, or save a setting.
6
| | | Arrow keys
· Press to navigate left, right, up and down within the main and submenus.
· While viewing zoomed image, press to move the zoomed image leftward, upward,
rightward or downward.
7
/
· Increase or decrease parent unit volume.
8
Zoom
· Press to zoom in/out.
· While in a sub-menu, press to view the help menu.
9
Power | LCD On/Off
10 Microphone
11 Antenna 12 Speaker 13 Power jack 14 RESET
· Force reboot the parent unit. 15 Stand
6
Connect, charge and power on the baby monitor
Connect the baby monitor
· The rechargeable battery in the parent unit is built-in. · Use only the
power adapters supplied with this product. · Make sure the parent unit and the
baby unit are not connected to an electronically controlled electric
power outlet. · Connect the power adapters in a vertical or floor mount
position only. The adapter prongs are not
designed to hold the weight of the parent unit and the baby unit, so do not
connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise,
the adapters may not properly connect to the outlets. · Make sure the parent
unit, the baby unit, and the power adapter cords are out of reach of children.
Slide the power switch to power on your baby unit.
· After powering up, the baby unit status LED will turn on and then turn off
after a short time.
WARM
NOTE: Camera lens and surface may get warm during normal operation.
7
Charge the parent unit battery before use The parent unit runs on rechargeable
battery or AC power. To continuously monitor your baby, keep the parent unit
connected to AC power.
· Before using the baby monitor for the first time, charge the parent unit
battery for 12 hours. When the parent unit battery is fully charged, the
battery icon segments are solid .
· The standby time varies depending on your actual use.
The parent unit turns on automatically after connecting to the power socket,
and the welcome screen appears. You can press Power to turn the parent unit on
or press and hold to turn it off.
The battery icon indicates the battery status (see the following table).
Battery indicators
Battery status
Action
and are displayed on the parent unit screen, with the
LED light flashes.
The battery icon segments are solid .
The battery has very little charge and may be used for only a short time.
Charge without interruption (about 30 minutes).
The battery is fully charged. To keep the battery charged, connect it to AC power when in use.
Raise the parent unit antenna for better reception
Test the sound level and position the baby monitor
Testing the sound level of the baby monitor
· This baby monitor is intended as an aid. It is not a substitute for proper
adult supervision, and should not be used as such.
· For hearing protection, make sure the parent unit is more than 1 metre away
from the baby unit. If you hear any feedback noise from the parent unit, move
the parent unit further until the noise stops. You can also press on the
parent unit to lower or mute the noise.
· Increase the parent unit speaker volume if you cannot hear the sounds
transmitted from the baby unit.
37 10:25 AM
1m
Positioning the baby monitor
· Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s cot or playpen.
1. Place the baby unit more than 1 metre away from your baby.
8
9
2. To avoid causing feedback noise from your baby monitor: · Make sure your baby unit and parent unit are more than 1 metre apart; OR · Turn down the volume of your parent unit.
1 1mm
<<1 1mm
Parent unit icons
Status icons
Direct mode The parent unit and baby unit connect to each other directly.
Red bars indicate no connection.
Router mode The parent unit and baby unit connect via the home Wi-Fi network.
The red icon(s) on the baby unit or parent unit, indicates no connection
between the respective unit(s) and the router.
Night vision is turned on.
Motion detection alert is turned on.
Status icons
Melodies and soothing sounds are playing.
Night light is turned on.
Auto night light brightness is activated.
Temperature alert is turned on.
Parent unit is muted.
21
Temperature
Battery level indicator Low battery indicator
10
Parent unit icons
Main SubMenu menu
Options
Night light
On/Off
· Turn on or turn off night light.
Color · Select a night light color. Brightness
· Adjust night light brightness.
· Set the brightness to Auto adaptive ambience.
Timer
· Set the timer to turn off night light after 15, 30 or 60 minutes, or remain
on always.
Melodies and soothing sounds
Play or Stop the lullaby.
General settings
Library
· Select to play all melodies, or play one of the five melodies or five
soothing sounds.
Camera Volume
· Adjust the play volume level.
Timer
· Set the timer to stop playing after 15, 30 or 60 minutes, or play non-stop.
Camera Connection
· Connect to home Wi-Fi network.
· Connect mobile phone.
Camera Volume
· Adjust Baby Unit speaker volume.
Screen Brightness
· Adjust Parent Unit screen brightness.
Main SubMenu menu
Alerts Settings
Options
Screenoff Timer
· The parent unit screen will turn off after the selected time to save energy.
You can still hear your baby while the screen is turned off.
Temperature Format
· Change temperature display format.
Other
· Language, Reset settings, Software update.
· Adjust alerts volume level.
Motion Detect
· Turn on/off motion detection alert.
· Adjust Motion Sensitivity Level to activate parent unit screen.
Temperature
· Turn on/off temperature detection alert.
· Select maximum and minimum temperature for alert range.
Low battery
· Turn on/off low battery alert.
Lost link · Turn on/off lost link alert.
Help and info
Help · Support Information
How-to Video · Support video
System Info · System Information
11
Basic operation
After powering up your baby monitor, the parent unit streams live video in
direct mode. We recommend you follow the instructions on-screen to set up home
Wi-Fi network with your monitor for functionality enhancements and mobile
access. See Auto software and firmware update and Download app for mobile
access in this Quick Start Guide.
Use the menu Press on the parent unit to enter the main menu, choose a menu
item, or save a setting. You can use the parent unit menu for advanced
settings or operations, such as to play or stop the baby unit lullaby, or
adjust the baby unit sound sensitivity.
While in the menu:
· Press | | | to scroll through the menu options.
· Press to select an item.
· Press / to return to the live video.
· Press to go to the Help & info page.
Adjust speaker volume Press / to adjust the parent unit speaker volume level
received from the baby unit.
Mute
Zoom
Press to zoom in or out in a fixed zoom sequence. indicates the image is
magnified 3 times.
12
Talk to your baby via the Baby Unit 1. Press and hold the key. 2. When the
icon displays
on screen, speak to your parent unit. Your voice is transmitted to the baby
unit. 3. When finished talking, release the key to hear your baby again.
Turn on/off the Parent Unit screen You can turn on or turn off the parent unit
screen without powering off the unit. You will still hear sounds from the baby
unit. · Press | on the parent unit to turn off
the screen. · Press any key on the parent unit to turn the
screen on again.
Pan and Tilt the Camera
Use the arrow keys on the parent unit to pan and tilt the camera. · Press | |
| to move the camera
leftward, rightward, upward and downward; · Press and hold | | | to move the
camera continuously.
To restore to the default settings or reset the Wi-Fi connection, you can
reset the parent unit by pressing the RESET key at the back of the unit.
Insert a pin into the RESET hole on the back of the parent pnit, and then
gently press the button inside.
13
Press and hold
Press
Night Light
You can control the night light remotely on the parent unit or directly on the baby unit.
On the Parent Unit:
On the Baby Unit:
1. Press .
2. Press or to scroll to
Night Light
menu.
3. Press or to choose below options:
Turn on/off night light Change night light colour Adjust night light brightness Set night light timer
Night Light Control Key Single Tap: Turn on/off Tap and hold (with the light turned on): Adjust night light brightness.
14
Download app for mobile access
1 App installation
a) From parent unit
· Before installing the app, please connect your baby monitor to your Wi-Fi network.
Press on the parent unit, go to
.
1. Press when the parent unit is idle.
2. Go to
Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your mobile device.
b) From app store 1. Browse the App Store or the Google Play store .
2. Search for the mobile app with the keyword “myvtech baby pro”. 3. Download and install the MyVTech Baby Pro mobile app to your mobile device.
OR
Scan the QR code on the right to get the app.
· Make sure your mobile device meets the minimum requirement for the mobile
app.
Minimum requirement The mobile app is compatible with: · AndroidTM 6.0 or
later; and · iOS 12 or later.
2 Set up user account
In your mobile device: 1. Tap to run the mobile app, and then create a user
account. 2. We recommend that you use common webmail services, such as Google
Gmail for registration of your user account. Check your email (and Spam
folder), and activate your new camera account via the email link, then sign in
to your account.
3 Add camera
Follow the instructions in the mobile app to pair the camera.
15
How the system works
For better security and more stable connectivity, this baby monitor requires
connecting to a 2.4GHz home Wi-Fi network and operating in Router mode
connection.
Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct
mode by default, which allows you to immediately stream video out of the box.
It is NOT recommended to continue using Direct Mode connection after initial
installation.
LocLaolcaalcaccecessss, for start up quick view and setup stage.
Tip
You may experience reduced signal strength if your parent unit and baby unit
are far apart, or there are obstructing factors, such as internal walls,
between them. You have to set up Router mode to connect the units via your
home Wi-Fi network to improve the connection between your parent unit and baby
unit.
Router mode
You are required to set up your monitor in Router mode to enjoy live video
streaming via your parent unit with an enhanced connection. Router mode is the
recommended mode for stable connectivity.
Router mode uses your 2.4GHz home Wi-Fi network to connect your video monitor.
It supports live video streaming through the parent unit and smartphone app.
Mobile access
Connecting Wi-Fi to enhance local access
If you want to stream live video remotely with your mobile device, download and install the MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video monitor system. It serves as a communicating channel between your baby unit and mobile device, allowing you to monitor and/or control your baby unit wherever you are. For more details, see Download app for mobile access section in this quick start guide.
Note
· When both parent unit and app are viewing the camera simultaneously, the
video quality will be optimised to deliver the best possible viewing result.
16
Protect your privacy and online security
VTech cares about your privacy and peace of mind. That’s why we’ve put
together a list of industry-recommended best practices to help keep your
wireless connection private and your devices protected when online. We
recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure. · Before installing a device,
ensure your router’s wireless signal is encrypted by selecting
the “WPA2-PSK with AES” setting in your router’s wireless security menu.
Change default settings. · Change your wireless router’s default wireless
network name (SSID) to something
unique. · Change default passwords to unique, strong passwords. A strong
password:
– Is at least 10 characters long. – Is complex. – Does not contain dictionary
words or personal information. – Contains a mix of uppercase letters,
lowercase letters, special characters and numbers. Keep your devices up to
date. · Download security patches from manufacturers as soon as they become
available. This will ensure you always have the latest security updates. · If
the feature is available, enable automatic updates for future releases.
Disable Universal Plug and Play (UPnP) on your router. · UPnP enabled on a
router can limit the effectiveness of your firewall by allowing other network
devices to open inbound ports without any intervention or approval from you. A
virus or other malware program could use this function to compromise security
for the entire network.
17
Test the location for the baby unit
If you plan to install your baby unit in a designated location, and use your
home Wi-Fi network to connect your video monitor, you need to test which of
your selected monitoring areas within the house have good Wi-Fi signal
strength. After you have powered on your Parent Unit, you can use your Parent
Unit Wi-Fi signal strength indicator to assist in checking. Once you have
identified the suitable location, you can install your baby unit. Adjust the
distance between your baby unit and the Wi-Fi router if needed.
· Depending on surroundings and obstructing factors, such as the effect
distance and internal walls have on signal strength, you may experience
reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the
distance or direction of your Parent Unit. Check with your Parent Unit again.
Auto software and firmware update
To ensure that your HD video monitor is always at its best performance, the
parent unit will prompt a message and ask you to update its software and the
baby unit’s firmware when there are new versions available. Select “Now” to
reboot the system, or switch off and on the parent unit later to reboot the
system into the latest software.
· To check if your device is running on the latest software, or to update your
device software, go to:
Software Update.
Connect your HD video monitor with home Wi-Fi network
· You must connect your video monitor to your secured home Wi-Fi network in or-
der to receive the latest software and firmware updates. To set the Wi-Fi up, go to:
Configure Wi-Fi.
Note · Make sure the baby unit is on when you set up the Wi-Fi network.
18
mount the baby unit (optional)
Notes
· Check for reception strength and camera angle of the baby unit before
drilling the holes.
· The types of screws and anchors you need depend on the composition of the
wall. You may need to purchase the screws and anchors separately to mount your
baby units.
1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (5.5mm drill bit).
2. If you drill the holes into a stud, go to step 3.
· If you drill the holes into an object other than a stud, insert the wall
anchors into the holes. Tap gently on the ends with a hammer until the wall
anchors are flush with the wall.
3. Align the wall mount bracket and screws with the holes in the wall as
shown. Tighten the screw in the middle hole first, so that the wall mount
bracket position is fixed. You can tighten the other screw in the top hole.
4. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the baby unit and a power supply.
19
3. Insert the screws into the holes and tighten the screws until only 6.5mm of the screws are exposed.
OR
1 4. Place the baby unit on the wall
2
mount bracket, and then slide it
forward until it locks into place.
Align the holes on the wall mount
bracket with the screws on the
wall, and slide the wall mount
bracket down until it locks into
place.
5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle.
Frequently asked questions
Below are the questions most frequently asked about the baby monitor.
Why does the baby monitor not respond normally?
Try the following (in the order listed) for common cure: 1. Disconnect the
power to the baby unit and the parent unit. 2. Wait a few seconds before
connecting power back to the baby unit and the
parent unit. 3. Turn on the baby unit and the parent unit. 4. Wait for the
parent unit to synchronise with the baby unit. Allow up to one
minute for this to take place.
Why doesn’t the baby unit and parent unit power-on light illuminate when the units are switched on?
Perhaps the parent unit is not connected to the power. Insert the adaptorplug
into the parent unit and insert the adaptor in a wall socket. Then, press
Power to switch on the parent unit and to establish connection with the baby
unit.
Perhaps the baby unit is not connected to the power. Insert the adaptor plug
into the baby unit and insert the adaptor in a wall socket. Then, slide the
ON/OFF switch to ON to switch on the baby unit to establish connection with
the parent unit.
Why doesn’t my parent unit charge while connected to AC power?
Make sure the power is not controlled by a electronic wall switch.
The battery may de degraded through extended use or defective. See Warranty
for repair/replacement.
Why is my screen in black and white?
The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal.
Why do I get glare or blurry display on my screen when viewing my baby at night?
During night-time or in a dark room, the surroundings and other interfering factors, like lighting, objects, colours and backgrounds may affect the image quality on your parent unit screen. Adjust the baby unit angle or place the baby unit at a higher level to prevent glare and a blurry display.
Why does the baby monitor produce a feedback noise?
The parent unit and baby unit may be too close to each other. · Move the parent unit away from the baby unit until the noise stops; OR · Turn down the volume of your parent unit.
Why does the parent unit beep?
The baby unit(s) may be out of range. Move the parent unit closer to the baby unit (but not less than 1m).
The parent unit may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit until the battery icon becomes solid .
The temperature of your baby’s room may be too high or too low.
Why does the parent unit react too quickly to other sounds?
The baby unit also picks up other sounds than those of your baby. Adjust the VOX sensitivity level to a lower level or lower the parent unit speaker volume.
Why don’t I hear a sound/Why can’t I hear my baby cry?
The parent unit speaker volume may be too low. See Adjust parent unit speaker volume to increase the volume.
Why can’t I establish a connection? Why is the connection lost every now and then? Why are there sound interruptions?
The baby unit may be out of range. Move the parent unit closer to the baby
unit (but not less than 1m).
Other electronic products and wireless products may cause interference with
your baby monitor. Try installing your baby monitor as far away from these
devices as possible.
20
21
General product care
To keep this product working well and looking good, follow these guidelines: ·
Avoid placing it near heating appliances and devices that generate electrical
noise (for example, motors
or fluorescent lamps). · DO NOT expose it to direct sunlight or moisture. ·
Avoid dropping the product or treating it roughly. · Clean with a soft damp
cloth. · DO NOT immerse the parent unit and the baby unit in water and do not
clean them under running
water. · DO NOT use cleaning spray or liquid cleaners. · Make sure the baby
unit and parent unit are dry before you connect them to the mains again.
Storage
When you are not going to use the baby monitor for some time, store the parent
unit, the baby unit and the adaptors in a cool, dry place.
Adult supervision
· This baby monitor should be used as an aid and proper adult supervision is
required. · Do not place the baby unit inside the crib or playpen. · As for
child’s safety, touch or play with the baby monitor and all the accessories
are not allowed. THIS
IS NOT A TOY.
Technical specifications
Transmit frequency
Channels
LCD
Nominal effective range
Power requirement
Baby unit: 2412 – 2472 MHz Parent unit: 2412 – 2472 MHz
13
7” Color LCD (IPS 1280×800 pixels)
Actual operating range may vary according to environmental conditions at the
time of use.
Baby unit power adapter: Output: 5V DC, 1A. Parent unit power adapter: Output:
5V DC, 2A. Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery
Credits: The Background Noise sound file was created by Caroline Ford, and is
used under the Creative Commons license. The Stream Noise sound file was
created by Caroline Ford, and is used under the Creative Commons license. The
Crickets At Night sound file was created by Mike Koenig, and is used under the
Creative Commons license. The Heart Beat sound file was created by Zarabadeu,
and is used under the Creative Commons license.
Android TM and Google Play TM are trademarks of Google Inc. App Store is a
trademark of Apple Inc., registered in the U.S. and other countries. IOS is a
trademark or registered trademark of Cisco in the U.S. and other countries and
is used under license.
Importer: Snom Technology GmbH. Aroser Allee 66, 13407, Berlin. Manufacturer:
VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57
Ting kok Road, Tai Po, Hong Kong.
22
Product warranty
CUSTOMER SERVICE AND WARRANTY
IMPORTANT Please retain the receipt as proof of purchase. Customer service You
are the owner of a quality product from VTech®, manufactured with care and
under strict quality controls.
The warranty does not cover the following: · Damage to the product due to
improper use. · Damage caused by failure to observe the operating
instructions. · Unauthorised repairs or modifications to the product. · Faulty
batteries or damage caused by battery leakage. · Damage caused by defective or
ineffective packaging used
in transit or damage caused during transportation. · Damage to the LCD
display.
If you have any questions, please contact our Customer Service:
www.vtechphones.eu
Declaration of Conformity
This product is intended for use within Europe. This equipment compiles with
the essential requirements for the Radio Equipment and Telecommunications
Terminal Equipment Directive 2014/53/EU. VTech Telecommunications Ltd. hereby
declares that this Video Baby Monitor RM7766HD is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The Declaration of Conformity for the RM7766HD is available from www.vtech.com
/rtte-directive.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their
respective packaging, indicates they must not be disposed of in domestic waste
as they contain substances that can be damaging to the environment and human
health. The chemical symbols Hg, Cd or Pb, where marked, indicate that the
battery contains more than the specified value of mercury (Hg), cadmium (Cd)
or lead (Pn) set out in Battery Directive (2006/66/EC). The solid bar
indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries
responsibly.
Specifications are subject to change without notice. © 2023 VTech
Telecommunications Ltd. All rights reserved. 06/23. RM7766HD_SNOM_EN_QSG_V1
23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>