Miele DFK-BH 45 Flat Ducting Bend Owner’s Manual
- August 21, 2024
- Miele
Table of Contents
Miele DFK-BH 45 Flat Ducting Bend
Product Information
Specifications:
- Product Name: DFK-BH 45 Flat ducting bend
- EAN: 4002515963852
- Material Number: 10811450
- Old Material Number: 28996394D
Description:
The DFK-BH 45 Flat ducting bend is designed for effective and customized
air guidance. It helps in directing air flow in a specific manner to suit your
needs.
Product Usage Instructions
- Locate the desired position in the ducting system where the air flow needs to be directed.
- Insert the DFK-BH 45 Flat ducting bend into the ducting system, ensuring a secure fit.
- Adjust the angle of the bend as needed to customize the air guidance according to your preference.
- Ensure proper sealing to prevent air leaks.
- Regularly check and clean the ducting bend to maintain optimal air flow.
FAQ
-
Q: How do I clean the DFK-BH 45 Flat ducting bend?
A: To clean the ducting bend, carefully remove it from the ducting system and use a damp cloth to wipe off any dust or debris. Avoid using harsh chemicals that may damage the material. -
Q: Can the angle of the bend be adjusted?
A: Yes, the angle of the DFK-BH 45 Flat ducting bend can be adjusted to customize the air guidance as needed.
DFK-BH 45
Flat ducting bend
For effective and customised air guidance.
EAN: 4002515963852 / Material number: 10811450 / Old Material Number: 28996394D
- For hygienic venting in extraction and recirculation mode
- Integrated air-guide profiles for optimum airflow properties
- National building regulations must be complied with
- White plastic, flame resistant
- Horizontal 45° bend
more information you can find here: http://www.miele.ie
DFK-BH 45
Flat ducting bend
For effective and customised air guidance.
DFK-BH45, bow 45°, horizontal, installation drawing