Generic B0CY99W425 Smart Wireless Remote Video Doorbell User Manual

Generic B0CY99W425 Smart Wireless Remote Video Doorbell

Specifications

• Price : $95.00
• Frequency : 2.4G
• Model : Vl. 1

Product Information

The Smart Doorbell is a convenient device that allows you to monitor and communicate with visitors at your door. It comes with an indoor display for easy access to the doorbell’s features.

Product Usage Instructions

Appearance Introduction:
Before using the product, please read the user manual carefully for reference.

The doorbell includes:

• Indoor display

Pairing the Doorbell with Indoor Display:
To pair the doorbell with the indoor display:

1. Short press the pairing icon on the indoor display.
2. Ensure a strong connection signal strength (GmI, CM).
3. Long press to activate the doorbell.

Using the Doorbell Features:
The doorbell features include:

• Turn/Increase volume
• Photo capture
• Video recording
• Monitor mode

Before using this product, please read the instructions carefully, which is for reference only, The specific operation is subject to the physical object.

Appearance introduction

The doorbell

Indoor display

The Doorbell is paired with an indoor display

1. Push the indoor display dial switch to “ON”, and long press the “M” key, the display shows connect….30, which goes into the pairing mode.
2. At the same time, long press the doorbell button, the work indicator light flashing.
3. Indoor display displays ” Connect….” is a successful pairing.

Function and key use instructions

1. Key function
2. 1. Long press “M” to enter the pairing mode
3. Tap to enter the Menu Settings. In Menu mode, click to return to the previous page.
4. Keynote
5. When the visitor rings the doorbell, the indoor unit will wake up and ring. Press once to answer the call, long press intercom, and press again to hang up, The indoor unit and outdoor doorbell will go to sleep at the same time.
6. In hibernation mode, press and hold Indoor Monitor to power on and access menu Settings.
7. In menu mode, click to confirm the setting.
8. Functions
9. In the video interface, press the “ ” key to reduce the intercom volume, and press the “ ” key to increase the volume.
10. Menu interface, press” ” to enter the next option or reduce the volume/brightness; press “ ” to enter the previous option or increase the volume/brightness.
11. Menu function
12. Photos : ring the doorbell, and the indoor display automatically captures the photos. The system can save the photos, cycle coverage, and save the latest photos.
13. Video recording : This function requires inserting the SD card and ringing the doorbell, the display will automatically open the video recording, cycle coverage, and save the latest video recording.
14. Ring tone setting: optional Ding Dong music.
15. Settings
16. Language : Press the keys to select the language, and press to confirm;
17. Brightness : Press the keys to adjust the screen brightness;
18. Ring volume : Press to adjust the ring volume;
19. Version number : production firmware version number;
20. Time setting : Press to adjust the time value. Press the ****key to enter the next setting. After all settings are completed, press “M” to return to save the settings.

Installation Site

The doorbell supports two installation methods, 3M force glue fixing and screw fixing, installed on the door or smooth wall; when the doorbell is low power, can be removed for charging. The indoor display is plugged in for a long time, placed on the easily charged desktop, or suspended on the wall; the device has a built-in lithium battery for emergency use of power failure. Walls, Windows, metal doors, etc. will weaken the signal strength, please try to install the equipment within the strong signal range.

Matters Need Attention

• The device is a low-power doorbell. When no one presses the doorbell, the device enters the dormant standby mode.
• Walls, Windows, metal doors, etc. will weaken the signal strength, please try to install the equipment within the strong signal range.
• Before use, pair the doorbell with an indoor display and install it in a valid area.
• If the monitor is too close to the doorbell, it produces echoes, keep them away or lower the volume and the noise will disappear.
• The applicable working temperature of this product is-10°C~50°C. Do not use this product under too high or too low a temperature.
• This product is a precision electronic product. Do not use this product in the environment of excessive moisture or water that may cause water to enter the product, so as not to affect the normal use.
• In order to better use this product, the front and side of the lens close to the glass, white wall and other reflective objects, so as not to cause the picture near bright, distant dark, or white phenomena.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FAQ’s

Q: How do I know if the doorbell is connected to the indoor display?
A: Check the connection signal strength indicators on both devices to ensure a successful pairing.

Q: Can I capture photos and record videos using the doorbell?
A: Yes, you can use the doorbell to capture photos and record videos of your visitors.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>