H and C RE2 Sensor Trash Bin Owner’s Manual
- August 21, 2024
- H and C
Table of Contents
H and C RE2 Sensor Trash Bin
Overview
Attention
- When inserting the batteries, follow the “+” and “-” markings.
- Use a clean cloth to clean the bin. Please do not flush the bin as the electrical part of the bin is made up of many electrical components.
- Water will damage the internal electrical components. Do not switch on if water has accidentally entered the bin.
- Do not squeeze or turn the lid to avoid damage.
- Replace the batteries in time to avoid liquid leakage.
- Avoid using the dustbin in direct sunlight or a humid environment.
- Keep the sensor area clean to ensure normal sensor function.
- Do not mix acid and alkaline batteries or rechargeable and disposable batteries.
- Please do not repair the bin or replace the electrical components yourself. Damage caused by this is not covered by the warranty.
Installation
Step 1: Fix the garbage bag Fasten the surplus part of the trash bag using the ring.
Step 2: Install the batteries Open the battery compartment and insert two AA batteries into the case as indicated in the image. Then, close the battery cover.
Step 3 : Sensor Function If waste or any part of your body approaches the sensor area (15- 20cm), the lid will open automatically. If you move away from the sensor zone for 5 seconds, the lid will close automatically.
DECLARATION OF CONFORMITY
Confinity NV, Dorp 16, 9830, Sint-Martens-Latem, Belgium
declares the following device in sole responsibility:
Brand name: Home & Comfort
Product type: Sensor trash bin 12L + 16L
Item number: OP_013446
Complies with the following harmonization rules: EN ISO 12100: 2010
the Machinery Directive 2006/42/EC
Signed for and on behalf of Sint-Martens-Latem, Belgium – JAN 2024
A. Pappijn – Product Manager
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>