EURO fase Lighting 47201 Greyson 22 Tall LED Outdoor Wall Sconce Installation Guide
- August 21, 2024
- EURO fase Lighting
Table of Contents
EURO fase Lighting 47201 Greyson 22 Tall LED Outdoor Wall Sconce
Product Information
- Model: GREYSON 47201
- Power: 17W MAX, LED, 120V~, 60Hz
Product Usage Instructions
Safety Instructions
Before starting the assembly and installation process, please read and
follow these important safety instructions:
- Ensure the power source is switched off before proceeding with any work.
- Always use the provided grounding conductor or attach the bare copper fixture wire to the green ground screw if no ground wire is present in the junction box.
- Tools required for assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire cutters.
- Helpful tools (not included): Wire strippers, Ladder.
Assembly Instructions
Follow these steps for assembly:
- Identify and organize the components labeled A to H as per the manual.
- Connect the wires as indicated in the manual, ensuring proper connection of white wires.
- Secure the fixture using appropriate tools and hardware.
Installation Instructions
Mount the assembled fixture securely to the desired location following
these steps:
- Ensure the mounting bracket is securely attached to the junction box.
- Connect the wires following the color codes provided.
- Secure the fixture in place and test for proper functionality before finalizing the installation.
FAQ
- Q: What should I do if I encounter issues during installation?
A: If you face any difficulties during installation or have any questions, please contact our Customer Service & Tech Support at 905-695-2147 or email us at Info@eurofase.com for assistance.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
17W MAX,LED,120V~,60Hz
(Integrated LED included)
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Wrap the green (or bare copper) grounding wire from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
- This unit is to be wall mounted only.
- This unit is suitable for indoor and outdoor use.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instructions for future reference.
- Estimated Assembly Time: 20 minutes
HARDWARE
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.
INSTALLATION
Customer Service & Tech Support:
905-695-2147
Email: Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canda L4B 1L8