IMGadgets L8 Kids Karaoke Mic User Manual
- August 20, 2024
- IMGadgets
Table of Contents
IMGadgets L8 Kids Karaoke Mic
USER MANUAL
KIDS KARAOKE MIC
OVERVIEW
Power ON/OFF Key
- Short press: Play/pause while music is playing
- Long press: 3 seconds to turn ON/OFF
- Double clicks: Turn on/off two microphones connected to each other
M Key (Modes switch)
- Short press: Toggle switch microphone Playback mode/LINE IN mode /Bluetooth mode
- Long press: Switch the flashing modes of light
Volume Up and Down keys
- ∧ : Short press the head volume plus,Double click the reverberation volume plus
Long press the music volume plus
- ∨: Short press the head volume reduction,Double click reverb volume reduction
Long press music volume reduction
Voice Changing key
- Short press: Voice changing effects switch to be Male voice /Female voice/Baby voice/Monster voice/Original voice
- Double clicks: original /accompaniment
5V charging/AUX
Switch to LINE IN mode then use LINE IN cable, the end of Type-C to plug into AUX port on the bottom of microphone, and using the 3.5 mm plug (the other end of same cable) to connect with mobile phone to start your recording or singing.
Earphones jack
Connect to a 3.5 mm earphone
Note : On LINE IN mode, the speaker volume increase or decrease is invalid.
| Product | KIDS KARAOKE MIC |
|---|---|
| Model | L8 |
| Bluetooth Version | V5.3 |
| Rated Power | 5W |
| Weights | 270G |
| Size | 210*87MM |
| Battery | 1200 mAh |
| Charging | DC 5V – 0.5A |
PAIRED WITH DIGITAL DEVICES
1. Long press the power button for 3seconds.Then the blue light flashing and
speaker is waiting for connection.
2. Turn on the Bluetooth connection of your devices to search for “L8” and
click “Connect”.
3. The speaker will play the sound of ‘dong’, then the blue light is steady
on. That means the connection is successful.lf the connection is not
successful. the blue light blinks slowly.
4. After pairing, press the Play button to play or pause the music.
Battery Charging
The red light indicator will be steady on during charging and will be off after battery is fully charged. When the battery is low, the battery alarm sound will be broadcasted for three times , and the system will be shutdown at the fourth alarm . Please use a DC- 5V power adapter for charging .lmproper power adapter such as 9V or 12V Quick charger may cause hardware damage or other faults.
Matters need to be attention
1. Wireless signal transmission including Bluetooth is greatly affect by the
surrounding environment such as metal, tree, human body,..etc.. and the
appropriate distance is also affected.
2. Do not charge the battery under fire and high temperature conditions!
3. Do not use the speaker where to close the heat sources(such as fire or heater)
4. Do not place the product in a heat source , such as to keep under the
strong sunlight or outdoor car exposed under the sunlight, which will degrade
the battery performance or battery life.
5. lf you don’t use it for a long time,ensure that the battery level is above
50%,and then store it safely. lt is recommended to store the product in indoor
warehouse with humidity less than 75% at 25°C to minimize the capacity
attenuation of the battery cell. During the transportation, the products
should be protected from rain and water,and should not be kept in high
temperature environment for along time.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or reloca te the receiving antenna.
- Increase the separation between the equi pment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference r eceived, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
FAQ
Q: What should I do if the connection is not successful?
A: If the connection is not successful, the blue light will blink slowly. Make sure the Bluetooth device is within range and try reconnecting.
Q: Can I use any power adapter for charging?
A: No, only use a DC-5V power adapter for charging. Using improper adapters may cause damage to the microphone.
Q: How do I change voice effects?
A: Use the Voice Changing key for different voice effects by short pressing or double-clicking according to the effect you desire.