FLUKE TP88 Rigid Back Probe Pins Owner’s Manual
- June 9, 2024
- FLUKE
Table of Contents
FLUKE TP88 Rigid Back Probe Pins Owner’s Manual
Key features
- Slides onto test probes measuring 2 mm (0.08 inches)
- Tested to 60 V DC
Product overview: Fluke TP88 Rigid Back Probe Pins
Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and the pin’s insulation protects it from shorting to other wires.
Ordering information
Fluke TP88
CUSTOMER SUPPORT
Fluke. Keeping your world up and running.®
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
©2022 Fluke Corporation.
Specifications subject to change without notice. 04/2022
Modification of this document is not permitted without written permission
from Fluke Corporation.
For more information call:
In the U.S.A. 800-443-5853
In Canada (800) 36-FLUKE
From other countries +1
425-446-5500
www.fluke.com
References
- Fluke Corporation: Fluke Electronics, Calibration and Networks
- Fluke TP88 Rigid Back Probe Pins | Fluke
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>