FindXeink 1FIND30 Rechargeable Power Bank User Manual
- August 20, 2024
- FindXeink
Table of Contents
FindXeink 1FIND30 Rechargeable Power Bank
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instructions
Compliance with FCC Rules
Ensure that the device is used in accordance with the guidelines outlined
in Part 15 of the FCC Rules to avoid any interference issues.
Avoiding Harmful Interference
Keep the device away from sources of interference such as other electronic
devices or strong electromagnetic fields to prevent harmful interference.
Handling Modifications
Do not make any changes or modifications to the device that are not
explicitly approved by the responsible party as it may affect the device’s
operation and compliance.
Frequently Asked Questions (FAQ)
-
What should I do if I encounter interference issues with the device?
Try relocating the device to a different area away from potential sources of interference. If the problem persists, contact customer support for further assistance. -
Can I make modifications to enhance the device’s performance?
No, any modifications not approved by the responsible party can void your authority to operate the equipment and may lead to undesired operation.
PRODUCT OVERVIEW
Before Starting
- Please Scan the QR code on the Left and Download FindXeink App. Or Search ‘FindXeink’ on the App Store.
- The App’s Icon Should Look Like
QUICK START
-
Open FindXeink App, Turn on Bluetooth Service of your device.
-
Press the button on the back to turn on.
-
Tab (+) button on the up right corner of home page.
-
Then press Confirm to connect it.
If everything works fine, you can now see the device connected at HOME page.
-
Tab into THEME page and click button on the up right corner.
-
Select an image from your album. Press SEND to proceed transmission.
REPLACE BATERY
-
Use included driver to take off the back plate.
-
Take out the coin battery. (Lasts 1 year per CR2032)
-
Replace it with a new CR2032 battery and put it in.
-
Place back the back plate and fix up the screws.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluate to meel general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>