APPLE SMARTKID-24G Spray Remote Control Car User Manual

APPLE SMARTKID-24G Spray Remote Control Car

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Interference Conditions: Must not cause harmful interference and must accept any received interference
• RF Exposure: Meets general RF exposure requirements
• Usage: Portable exposure condition without restriction

Product Usage Instructions

Warnings and Guidelines

Follow these guidelines to ensure proper operation:

• Reorient or relocate the receiving antenna if experiencing interference.
• Increase the separation between the equipment and the receiver to avoid interference.
• Connect the equipment to a different circuit than the receiver.
• Do not make changes or modifications not approved by the responsible party.
• If in doubt, consult the dealer or an experienced radio/TV technician for assistance.

Installation
Place the device in an area with good reception and proper ventilation. Ensure proper power supply connections.

Operation
Turn on the device using the designated power button. Follow any additional instructions in the user manual for specific operations.

Maintenance
Regularly clean the device with a soft, dry cloth. Avoid using harsh chemicals that may damage the product.

Storage
Store the device in a cool, dry place away from direct sunlight and moisture. Disconnect any power source before storing.

Disposal
Follow local regulations for proper disposal of electronic devices. Do not dispose of in the regular household waste.

FAQ

• Q: Can I modify the device without approval?
  A: No, any changes or modifications not approved may void your authority to operate the equipment.

• Q: What should I do if I experience interference?
  A: Try reorienting the antenna, increasing separation from other equipment, or consult a professional for assistance.

SPRAY REMOTE CONTROL CAR USER MANUAL

• Thank you for using our company’s toy products. To help you better understand this product, please read the following instructions before use. This will give you a different operating experience.
• This product is suitable for children ages 6 and above. It should be assembled/charged by adults before children can play with it.
  Warning : Do not dismantle or modify this product without authorization, as any alteration may result in the product not functioning properly.

REMOTE CONTROL FUNCTION DESCRIPTION

BATTERY

FCC INFORMATION

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio it clinician for h that to which the receiver is connected.

If you cannot eliminate the interference, the FCC requires that you stop using your equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: W89-SMARTKID-49R
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Use 5*1.5V “AA” disposable batteries, additional purchase required (Included).

HOW TO INSTALL THE BATTERY

1. Turn the switch on the remote control car and remote control to the “OFF” position.
2. Use a cross screwdriver to open the battery cover.
3. Insert the battery as shown in the picture above.
4. Put on the battery cover.

HOW TO PLAY WITH A REMOTE CONTROL CAR

1. Turn on the remote control car/remote control switch to complete the frequency matching.
2. Use the joystick and buttons on the remote control to control the car to move forward or backward, rotate left or right, move left or right, and perform a one-key demonstration.
3. When the battery is depleted, the steering becomes unresponsive and the forward and backward movements also become slower. At this time, the battery should be removed and charged.

ADDING WATER AND MIST EFFECT

To fill the car water tank, add an appropriate amount of water using a water dispenser.

REMOTE CONTROL CAR DEMONSTRATION

• Move the joystick on the remote control to move the car forward/backward
• Joystick to male contre mol car to platoon to the left/right.
• Press the “Left / Right Forward” button to make the remote control car turn left / right in the forward direction.
• Simultaneously, move the forward/backward joystick and the left/right rotation joystick, and the remote control car will turn left/right front or left/right rear.
• Press the “left/right turn” button to make the remote control car turn left/right.
• Press the “Auto Demo” button to activate the remote control car automatic demonstration feature.

INSTRUCTIONS FOR USE

BATTERY CAUTION:

VEHICLE

1. Use the provided 2 x 1.5V alkaline battery (Included).
2. Incase the product does not function correctly, firstly check of the power supply or generally incorrect connection of the battery connector.

TRANSMITTER

1. Rechargeable batteries are not recommended.
2. Alkaline batteries are recommended.
3. Non-rechargeable batteries are not to be recharged.
4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
5. Do not mix old and new batteries.
6. Only batteries of the same or equivalent types as recommended are to be used.
7. Batteries are to be inserted with the correct polarity.
8. The supply terminals are not to be short-circuited.
9. If batteries are loose, bend out the contacts for a tight fit.
10. Exhausted batteries are to be removed from the toy and be disposed of immediately; never dispose of batteries in fire.
11. If storing product for long periods, make sure to remove batteries.
12. Check the product periodically for signs of damage to electrical parts; do not play with the product until damage has been properly assessed.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>