AVITAL 7147LSEC Car Alarm Instruction Manual
- August 20, 2024
- AVITAL
Table of Contents
AVITAL 7147LSEC Car Alarm
Product Specifications
- Transmitter Model: 7147LSEC
- Technology: AM 1-Way
- Max Range: 100M
- LED: Status indication
- Battery: CR2032
- Button Features:
1. Active when transmitting information
2. Activates Arm and Panic Off
3. Activates Disarm and Panic Off
4. Activates Auxiliary Output 1 and Silent ModeTM
5. Activates Panic On/Off + Activates Auxiliary Output 2
Product Usage Instructions
Battery Installation:
To install the CR2032 battery, locate the battery compartment on the
transmitter and carefully insert the battery following the correct polarity.
Pairing with Receiver
Ensure the transmitter and receiver are within the specified range of 100
meters. Press and hold the desired button on the transmitter while activating
the pairing mode on the receiver to establish a connection.
Status Indication
The LED on the transmitter provides status indications such as successful
transmission, low battery, or connection status. Refer to the manual for
specific LED patterns and meanings.
Button Functions:
Each button on the transmitter serves a specific function, including
arming, disarming, activating panic mode, and controlling auxiliary outputs.
Familiarize yourself with these functions before use.
Frequently Asked Questions (FAQ)
-
Q: How do I change the battery?
A: To change the battery, open the battery compartment, remove the old CR2032 battery, and insert a new one following the correct polarity. -
Q: What is the range of the transmitter?
A: The transmitter has a maximum range of 100 meters under optimal conditions.
7147LSEC MANUAL
- Transmitter Model : 7147LSEC
- Technology: AM 1-Way
- Max Range : 100M
- LED : status indication
- Battery:CR2032
- Button:4-button
Feature|
---|---
Description
Transmit LED| Active when transmitting information
| Activates Arm and Panic Off.
| Activates Disarm and Panic Off.
| Activates Auxiliary Output 1 and Silent ModeTM.
| Activates Panic On/Off.
| Activates Auxiliary Output 2.
FCC Statement
This device complies with FCC Rules part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference that may be received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user’s authority to use the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC WARNING:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>