ASUS IP57 TUF Gaming K3 Gen II User Guide
- August 20, 2024
- Asus
Table of Contents
ASUS IP57 TUF Gaming K3 Gen II
Product Information
Specifications
- Product Name: Optical Gaming Keyboard TUf Gaming K3 GEN II
- Manufacturer: ASUS
- Interface: USB
Product Usage Instructions
Connecting the Keyboard
- Connect the keyboard to your PC using the provided USB cable.
Software Installation and Firmware Update
- Download and install the Armoury Crate software from https://rog.asus.com.
- Follow the on-screen instructions to update your keyboard’s firmware using Armoury Crate.
Customizing the Keyboard
- Open Armoury Crate software on your PC.
- Follow the software instructions to personalize and customize your keyboard settings.
Swapping the Keyboard Cover
- To remove the keyboard cover, carefully detach it from the keyboard.
- To install a new cover, align it correctly and gently press it into place.
Key Combinations
Use key combinations for various functions:
- On-the-fly Macro Recording:
1. **Step 1:** Press Fn + Left-ALT to start recording.
2. **Step 2:** Enter the keys you want to record as a macro.
Frequently Asked Questions (FAQ)
- How do I update the firmware of my TUf Gaming K3 GEN II Keyboard?
To update the firmware, follow these steps:
- Download and install the Armoury Crate software from the ASUS website.
- Connect your keyboard to the PC and open Armoury Crate.
- Follow the software instructions to update the firmware of your keyboard.
- Can I use the TUf Gaming K3 GEN II Keyboard with a Mac?
The TUf Gaming K3 GEN II Keyboard is designed for PC use and may not be fully compatible with Mac systems. It is recommended to check for compatibility before use.
OPTICAL GAMING KEYBOARD
TUf Gaming k3 GEN II
Quick Start Guide (US)
Q23272
First Edition
March 2024
Copyright © ASUSTeK Computer Inc. All Rights Reserved
Package Contents
- Connect your keyboard to the PC.
- Download and install the Armoury Crate software from https://rog.asus.com.
- Follow the software instructions to update your keyboard’s firmware.
- Customize your keyboard using Armoury Crate.
Swapping the keyboard cover
Key combinations
On-the-fly Macro Recording
Step 1: Fn + Left-ALT to start recording
Step 2: Enter the keys to be recorded as a macro
Step 3: Fn + Left-ALT to end recording
Step 4: Assign Macro Key
Profile Switch
Fn + 1 / 2 / 3 / 4
Light Effect Switch
Fn + Right or Fn + Left
Brightness Level
Fn + Up: Brightness up
Fn + Down: Brightness down
Factory Default
Fn + Esc: Press and hold for 10-15 seconds
Media Control
Fn + F5: Play / Pause toggle
Fn + F6: Stop
Fn + F7: Skip to previous track/chapter
Fn + F8: Skip to next track/chapter
Fn + F9: Mute/Unmute Fn + F10: Volume down
Fn + F11: Volume up
Windows Key Lock
FN + Windows key
Profile color and lighting effect mapping
list
Effects and the color| Profile 1 (Red)|
Profile 2 (Purple)| Profile 3 (Orange)| Default
Profile (White)
---|---|---|---|---
Static| Red| Purple| Orange| White
Breathing| Red| Purple| Orange| White
Color Cycle| Multi-color| Multi-color| Multi-color| Multi-color
Rainbow| Multi-color| Multi-color| Multi-color| Multi-color
Ripple| Red| Purple| Orange| Random color
Reactive| Red| Purple| Orange| Random color
Starry Night| Red| Purple| Orange| Random color
Quicksand| Red| Purple| Orange| Random color
Current| Red| Purple| Orange| Random color
Rain Drop| Red| Purple| Orange| Random color
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product. ASUS will only be responsible for or indemnify
you for loss, damages or claims based in contract, tort or infringement under
this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
CAN ICES-003(B)/NMB-003(B)
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory
framework, we published the chemical substances in our products at ASUS REACH
website at http://csr.asus.
com/English/REACH.htm.
Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to
enable proper
reuse of parts and recycling. The symbol of the crossed out wheeled bin
indicates that the
product (electrical, electronic equipment and mercury-containing button cell
battery) should
not be placed in municipal waste. Check local regulations for disposal of
electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts.DO NOT
disassemble the device
IP57 Water and Dust Resistance
This device complies with a rating of IP57 under IEC standard 60529.
- Please note that splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear.
- Do not attempt to plug in a wet keyboard, liquid damage is not covered under the warranty.
- ROG recommends waiting a minimum of 72 hours after submerging before normal use. Drying time may vary depending on the actual environment.
KC: Korea Warning Statement
France sorting and recycling information
VCCI: Japan Compliance Statement Class B ITE
EAC Certification Logo
Simplified UKCA Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of related
Regulations. Full text of UKCA declaration of conformity is available at:
www.asus.com/support.
CE Mark Warning
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of related
Directives. Full text of EU declaration of conformity available at:
www.asus.com/support
Service and Support
Visit our multi-language website at https://www.asus.com/support
References
- ÐžÑ„Ð¸Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ Ñлужба поддержки | ASUS РоÑÑии
- Official Support | ASUS Global
- ASUS в СÐГ
- Centre de téléchargement | Assistance officielle | ASUS France
- Official Support | ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>