APA 23450 Garage Wall Protection Instruction Manual

Table of Contents

Q: Can the garage wall protection be used outdoors?
- A: The product is designed for indoor use in garages, underground garages, warehouses, and workshops. Outdoor use may affect its durability and effectiveness.
Q: What should I do if the garage wall protection gets damaged?
- A: If the wall protection is damaged, it is recommended to replace it to maintain its effectiveness in preventing scratches on walls and cars.

Garage wall protection, angular, round, straight

WARNING

Read the operating instructions carefully before commissioning and observe all safety instructions!
Non-observance can lead to personal injury, and damage to the device or your property! Keep the original packaging, the sales receipt, and these instructions for future reference!
When passing on the product, also pass on these instructions. Check the contents of the packaging for integrity and completeness before commissioning!

Garage wall protector is used to prevent scratches on the wall and car. It is suitable for use in garages, underground garages, warehouses, and workshops.
This product is not intended to be used by children and people with limited mental abilities or without required expertise. Children must be kept away.
The product is not intended for commercial use.
Intended use also includes observing all the information in this manual, in particular the safety instructions.
Any other use is considered improper and may result in property damage or personal injury. EAL GmbH accepts no liability for damage caused by improper use.

SCOPE OF DELIVERY

The warning triangle indicates all instructions important for safety. Always follow them, otherwise, you could be injured or the product could be damaged.
Children must not play with the product. Cleaning and user maintenance must not be carried out by children without supervision.
Do not leave the packaging material lying around carelessly. This may become a dangerous toy for children!
Use this product only for its intended purpose!
Do not manipulate or disassemble the product!

PREPARATION

Determine the location where the wall guard is to be attached.
Ensure the correct height so that, for example, the vehicle door or bumper abuts the wall guard.
Clean the place where you want to attach the wall protection.
Remove dust and grease from smooth surfaces.
For rough surfaces, such as masonry or plaster, remove loose paint residue or fluorescence.

MOUNTAIN

23450
- Garage wall protector, angular: This wall protector is used on wall edges or angular columns.
23451
- Garage wall protector, round: This wall protector is used on pipes or round columns.
23452
- Garage wall protector, straight: This wall protector is used on walls to protect vehicle doors.
- Peel off the protective film of the adhesive coating. Place the wall protection with its center lightly against the cleaned surface. Press the wall protection rmly from the center outwards to avoid waves or bubbles.

When used as intended, the garage wall protection is maintenance-free.
Clean the garage wall protection only with a damp cloth, do not use any harsh cleaners or solvents.

NOTES ON ENVIRONMENTAL PROTECTION