APA 16443 Lithium Powerpack 10000 mAh Instruction Manual

16443 Lithium Power pack 10000 mAh
Instruction Manual

© EAL GmbH, 16443 03. 2023
Lithium Power pack 10.000 mAh

16443 Lithium Power pack 10000 mAh

WARNING
Read the operating instructions  carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damages to the device or your property! Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! On transfer of the product, please include these operating instructions as well. Please check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

The Lithium Power pack is used to charge the batteries of mobile phones, smart phones, tablet computers, MP3 players and similar devices, which can be charged using a USB cable. In addition, there is also the possibility of jump- starting 12 V vehicles.

The Power pack is only a support for a weak starter battery. It cannot replace an empty, deep-discharged or faulty vehicle battery.

This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these instructions, particularly the observance of the safety instructions.
Any other use is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. The EAL GmbH will not assume any liability for damage resulting from improper use.

 SCOPE OF DELIVERY

1 x Power pack
1 x USB-C charging cable
1 x Jump lead
1 x Bag
1 x Operating manual

SPECIFICATIONS

black: approx. 130 mm

SAFETY PRECAUTIONS

• **** The warning triangle sign indicates all instructions which are important for safety. These must always be followed, otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• **** Do not treat packaging material carelessly. It may become a dangerous toy for children!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• Before attempting starting help, check the manual of your vehicle to check how to carry out a jump start for your vehicle.
• When using lead batteries, always wear protective goggles and clothing.
• **** Lead batteries contain aggressive caustic acids. Prevent skin and eyes from coming into contact with the lead battery fluids! Never dismantle lead batteries! Wash affected skin thoroughly using soap and water. If acid has got into an eye, rinse immediately for at least 10 minutes under clean, running, lukewarm water! Then immediately consult a doctor!
• If your clothing has acid on, rinse immediately with plenty of soap and water!
• Never wear rings, necklaces, watches or similar when handling batteries or chargers. The short-circuiting of the battery contacts creates the risk of burns and explosion!
• **** The Power pack is only designed as a starting aid for a vehicle that has a battery of its own. The Power pack cannot replace the vehicle battery.
• Always disconnect the jump lead from the Power pack before storage to ensure that no short circuits can occur between the terminal clamps.
• Do not attempt to remove and replace the battery pack of the Power pack. If the battery comes to the end of its useful life, dispose of the entire in accordance with your local guidelines.
• Place the Power pack on a heat-resistant surface during charging.
• **** Never charge the Power pack using a damaged charger.
• Do not leave the Power pack unattended during charging.
• Never attempt to start a vehicle when the battery is frozen, as this brings a risk of explosion.
• Store these instructions carefully and, if necessary, pass them on to other users.

EXPLANATION OF SYMBOLS

| Complies with EC directives
---|---
| Labelled electrical products may not be disposed of in the household waste
| Batteries may not be disposed of in the household waste system.
****| Devices with this symbol may only be operated in the house (dry environment)
| Read the operating instructions

OPERATING INSTRUCTIONS

6.1 OVERVIEW

1 Switch
2 Display
3 USB-C input
4 USB output
5 LED light
6 EC5 starting help connection
7 Control lamp Saltbox
8 Smart box jump lead| 9 Terminal clamp, black (-)
10 Terminal clamp, red (+)
11 USB-C charging cable
12 Bag
13 Charging level in %
14 Voltage
15 Current
16 Input / output
---|---

6.2 CHECKING THE CHARGING LEVEL OF THE POWERPACK
Press the switch once (Position 1 in the overview).
The display (Position 2 in the overview) is activated and shows the charging level of the Power pack as a percentage (Position 13 in the overview).
6.3 CHARGING THE POWERPACK
Use a USB charger with a 2 A output to charge the Power pack (not included in delivery!). Insert the USB-C connector of the charging cable (Position 11 in the overview) into the USB-C input (Position 3 in the overview) of the Power pack. Insert the USB-A connector of the charging cable into the charger. Connect the charging device to a socket. The display shows the charging progress as a percentage, 1% – 99%. At 100%, the battery of the Power pack is completely charged.
After charging, first remove the charger from the socket and then disconnect the charging cable from the charger and the Power pack.

6.4 JUMP START FOR 12 V VEHICLES

1. Switch off the ignition and all consumers on your vehicle.
2. Ensure that the battery capacity of the Power pack is still at least 75% and that the battery calipers of your vehicle battery are not soiled or oxidized.
3. Connect the Power pack and the jump lead by inserting the connector of the Smart box (Position 8 in the overview) of the jump lead into the starting help connection (position 6 in the overview) of the Power pack. The LED light (Position 5 in the overview) is activated. Ensure that the connector is inserted firmly and securely. The control lamp (Position 7 in the overview) of the Smart box flashes alternately red/green.
4. First connect the red terminal clamp (Position 10 in the overview) of the jump lead with the positive pole, and then the black terminal clamp (Position 9 in the overview) with the negative pole of the vehicle battery. The terminal clamps must have a firm and secure contact to the battery poles.
5. If the jump leads are connected correctly, the control lamp shines green permanently, and a single tone is issued.  
6. Start the vehicle motor. Do not operate the starter for longer than 3 seconds. If the starting attempt was not successful, wait at least two minutes before trying again. After a third failed attempt, do not start a further attempt and instead check your vehicle for faults.
7. Disconnect the jump lead from the Power pack. Then remove the terminal clamps from the vehicle battery.

6.4.1 POSSIBLE ERRORS DURING JUMP START
The control lamp of the Smart box does not shine green permanently:

• The terminal clamps have no contact or poor contact to the battery calipers
  Clean the battery poles and reattach the terminal clamps

• The battery of the Power pack is not adequately charged
  Charge the battery

• The current required for the jump start exceeds the possibilities of the Power pack
  Use a Power pack with greater performance

6.5 USING THE LED LIGHT / SIGNAL LAMP
To switch on the LED lamp continuously (Position 5 in the overview), keep the switch (Position 1 in the overview) of the Power pack pressed for approx. 3 seconds. Then, you can switch the following light functions one after another bypressing the switch again: fast flashing – SOS – OFF.

6.6 CHARGING USB DEVICES
If your USB device has a USB-C port, you can use the supplied USB-C cable for charging. For other ports, use a cable suitable for your device. These instructions describe how to use the supplied USB-C charging cable. Insert the USB-A  plug into the USB output (position 4 in the overview) of the Power pack. The USB-C plug, connect to your USB device. Press the switch (position 1 in the overview) of the Power pack to start the charging process. The display shows the  charging voltage (position 14 in the overview) and the charging current (position 15 in the overview).
After charging, first disconnect the charging cable from the Power pack, then remove the charging cable from your USB device.

CLEANING, STORAGE AND MAINTENANCE

7.1 CLEANING
Only clean the Power pack with a soft cloth and do not use any aggressive cleaning agents or solvents. Never allow liquids to ingress into the housing.
7.2 STORAGE
When it is not in use, the Power pack should be stored in a dry place. Do not expose the Power pack to moisture, oil, dust, dirt, high temperatures, excessive vibrations or mechanical stresses. Always disconnect the jump lead from the  Power pack before storage to ensure that no short circuits can occur between the terminal clamps.
7.3 MAINTENANCE
When the Power pack is not in use, recharge it once it reaches a battery capacity of 25%.

NOTES REGARDING ENVIRONMENTAL PROTECTION

The packaging is made up of environmentally friendly materials which may be disposed of via your local recycling points. Do not put electrical devices into the household waste. Electronic and electrical devices must be collected separately and sent for environmentally friendly recycling. Contact your community or town administration for information regarding the disposal of electrics.

CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
 info@eal-vertrieb.com
www.eal-vertrieb.com

References

• vertrieb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>