APA 21058 Pilot Vape Battery Instruction Manual
- June 13, 2024
- APA
Table of Contents
- 21058 Pilot Vape Battery
- PROPER USE OF THE PRODUCT
- SCOPE OF DELIVERY
- SPECIFICATIONS
- SAFETY PRECAUTIONS
- OPERATING INSTRUCTIONS
- MAINTENANCE AND CARE
- NOTES REGARDING ENVIRONMENTAL PROTECTION
- CONTACT INFORMATION
- CONVERSION TABLE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Instruction Manual
Art. no. 21058
Torque wrench TÜV GS
Operating instructions
21058 Pilot Vape Battery
WARNING
Please read the operating instructions carefully prior to use and observe all
safety instructions!
Non-compliance can lead to personal injuries, damage to the device or your
property!
Store the original packaging, the receipt and these instructions so that they
may be consulted at a later date! When passing on the product, please also
include these operating instructions.
Please check the contents of package for integrity and completeness prior to
use!
PROPER USE OF THE PRODUCT
The torque wrench is used to tighten screws and nuts with a pre-set force.
Only use the torque wrench for tightening screw connections, but never for
loosening. It is not suitable for this purpose.
This device is not designed to be used by children or persons with limited
mental abilities or without experience and/or lack of required specialist
knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all
information in these operating instructions, particularly the observance of
the safety notes. Any other utilisation is considered to be contrary to the
intended purpose and may lead to material damage or personal injuries. EAL
GmbH assumes no liability for damage resulting from improper use.
SCOPE OF DELIVERY
1 x torque wrench,
1 x socket 17/19 mm
1 x socket 21/23 mm| 1 x extension, 125 mm
1 x storage case
1 x instructions
---|---
SPECIFICATIONS
Measurement range: 28 – 210 Nm
Drive : 12,7 mm ½“
Weight: approx. 1.335 kg
Length: approx. 450 mm
SAFETY PRECAUTIONS
- The warning triangle indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
- Children may not play with the device.
- Cleaning and user maintenance may not be carried out by children without supervision.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product for its designated purpose!
- Do not manipulate or disassemble the device!
- For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
OPERATING INSTRUCTIONS
Overview
Setting the direction of rotation:
You can set the direction of rotation using the changeover lever on the top of the torque wrench. When the lever is in the right hand position, screws can be tightened clockwise. If it is in the left hand position, the direction of rotation is counterclockwise.
Setting the torque in Nm:
Unlock the handle by turning the locking screw counterclockwise. Hold the
torque wrench in your hand in such a way that you have the torque scale in
view. By turning the handle, you can now set the desired torque. The scale on
the shaft of the wrench indicates the torque in Newton metres (Figure 3). For
precise adjustment, use the adjustment scale on the handle (Fig. 4).
Tighten the locking screw by turning it clockwise in order to lock the handle
against twisting. This prevents adjustment of the torque during work.
Example: Adjusting the torque
Tightening a screw/nut with a set torque:
Caution:
Do not use ball joints or cardan joints and avoid the use of long extensions
so that the set value is not distorted.
Put the required tool onto the drive square of the torque wrench. Put the tool
onto the screw or nut. Tighten evenly but not jerkily until you hear a click,
both acoustically and in the hand.
Caution:
Finish the tightening process immediately after the “click”, especially with
small torque settings.
Caution:
Release the torque wrench release mechanism after fi nishing work. To do this,
turn the handle back beyond the smallest adjustable torque.
MAINTENANCE AND CARE
- Only store the torque wrench in a relaxed state.
- Store the torque wrench in its case in a dry place.
- Before it is used the next time, loosen the torque wrench several times with a small torque in order to ensure sufficient lubrication of the mechanism.
- Only clean the torque wrench with a dry cloth. Never allow liquids to get into the torque wrench.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin or the public/municipal
collection points.
The materials are recyclable. You make an important contribution to protecting
our environment by recycling, material utilisation or other forms of reusing
waste equipment!
CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107 42115 Wuppertal Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
CONVERSION TABLE
| Nm | kpm | ft-lbs |
|---|---|---|
| 40 | 4,1 | 29,5 |
| 45 | 4,6 | 33,2 |
| 50 | 5,1 | 36,9 |
| 55 | 5,6 | 40,6 |
| 60 | 6,1 | 44,3 |
| 65 | 6,6 | 47,9 |
| 70 | 7,1 | 51,6 |
| 75 | 7,6 | 55,3 |
| 80 | 8,2 | 59,0 |
| 85 | 8,7 | 62,7 |
| 90 | 9,2 | 66,4 |
| 95 | 9,7 | 70,1 |
| 100 | 10,2 | 73,8 |
| 105 | 10,7 | 77,4 |
| 110 | 11,2 | 81,1 |
| 115 | 11,7 | 84,8 |
| 120 | 12,2 | 88,5 |
| 125 | 12,7 | 92,2 |
| 130 | 13,3 | 95,9 |
| 135 | 13,8 | 99,6 |
| 140 | 14,3 | 103,3 |
| 145 | 14,8 | 106,9 |
| 150 | 15,3 | 110,6 |
| 155 | 15,8 | 114,3 |
| 160 | 16,3 | 118,0 |
| 165 | 16,8 | 121,7 |
| 170 | 17,3 | 125,4 |
| 175 | 17,8 | 129,1 |
| 180 | 18,4 | 132,8 |
| 185 | 18,9 | 136,4 |
| 190 | 19,4 | 140,1 |
| 195 | 19,9 | 143,8 |
| 200 | 20,4 | 147,5 |
| 205 | 20,9 | 151,2 |
| 210 | 21,4 | 154,9 |
| kpm | Nm | ft-lbs |
| --- | --- | --- |
| 4 | 39,2 | 28,9 |
| 5 | 49,0 | 36,2 |
| 6 | 58,8 | 43,4 |
| 7 | 68,6 | 50,6 |
| 8 | 78,5 | 57,9 |
| 9 | 88,3 | 65,1 |
| 10 | 98,1 | 72,3 |
| 11 | 107,9 | 79,6 |
| 12 | 117,7 | 86,8 |
| 13 | 127,5 | 94,0 |
| 14 | 137,3 | 101,3 |
| 15 | 147,1 | 108,5 |
| 16 | 156,9 | 115,7 |
| 17 | 166,7 | 123,0 |
| 18 | 176,5 | 130,2 |
| 19 | 186,3 | 137,4 |
| 20 | 196,1 | 144,7 |
| 21 | 205,9 | 151,9 |
| 22 | 215,7 | 159,1 |
1 Nm = 0,102 kpm
1 Nm = 0,737 ft-lbs
1 kpm = 9,807 Nm
1 kpm = 7,233 ft-lbs
1 ft-lbs = 1,356 Nm
1 ft-lbs = 0,138 kpm
| ft-lbs | Nm | kpm |
|---|---|---|
| 30 | 40,7 | 4,1 |
| 35 | 47,5 | 4,8 |
| 40 | 54,2 | 5,5 |
| 45 | 61,0 | 6,2 |
| 50 | 67,8 | 6,9 |
| 55 | 74,6 | 7,6 |
| 60 | 81,3 | 8,3 |
| 65 | 88,1 | 9,0 |
| 70 | 94,9 | 9,7 |
| 75 | 101,7 | 10,4 |
| 80 | 108,5 | 11,1 |
| 85 | 115,2 | 11,8 |
| 90 | 122,0 | 12,4 |
| 95 | 128,8 | 13,1 |
| 100 | 135,6 | 13,8 |
| 105 | 142,4 | 14,5 |
| 110 | 149,1 | 15,2 |
| 115 | 155,9 | 15,9 |
| 120 | 162,7 | 16,6 |
| 125 | 169,5 | 17,3 |
| 130 | 176,3 | 18,0 |
| 135 | 183,0 | 18,7 |
| 140 | 189,8 | 19,4 |
| 150 | 203,4 | 20,7 |
| 155 | 210,2 | 21,4 |
© EAL GmbH, 21058 05.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>