APA 16444 Lithium Powerpack 10.000 mAh Instruction Manual
- June 17, 2024
- APA
Table of Contents
- PROPER USE OF THE PRODUCT
- SCOPE OF DELIVERY
- SPECIFICATIONS
- SAFETY PRECAUTIONS
- EXPLANATION OF SYMBOLS
- OPERATING INSTRUCTIONS
- CLEANING, STORAGE AND MAINTENANCE
- NOTES REGARDING ENVIRONMENTAL PROTECTION
- CONTACT INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Art. no. 16444
Lithium Powerpack 10.000 mAh
Operating instructions
WARNING
Read the operating instructions carefully prior to initial use and observe all
of the safety notes!
Not observing such may lead to personal injury, damages to the device or your
property! Store the original packaging, the receipt and these instructions so
that they may be consulted at a later date! On transfer of the product, please
include these operating instructions as well. Please check the contents of
package for integrity and completeness prior to use!
PROPER USE OF THE PRODUCT
The Lithium Powerpack is used to charge the batteries of mobile phones, smart
phones, tablet computers, MP3 players and similar devices, which can be
charged using a USB cable.
In addition, there is also the possibility of jumpstarting 12V vehicles.
The Powerpack is only a support for a weak starter battery. It cannot replace
an empty, deep-discharged or faulty vehicle battery.
This device is not designed to be used by children or persons with limited
mental abilities or without experience and/or lack of required specialist
knowledge.
Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all
information in these instructions, particularly the observance of the safety
instructions.
Any other use is considered to be contrary to the intended purpose and may
lead to material damage or personal injuries. The EAL GmbH will not assume any
liability for damage resulting from improper use.
SCOPE OF DELIVERY
1 x Powerpack
1 x USB-C charging cable
1 x Jump lead with start box
1 x Bag
1 x Operating manual
SPECIFICATIONS
| Size (L x W x H): | approx. 190 x 90 x 40 [mm] |
|---|---|
| Weight: | approx. 0.650 kg |
| Battery capacity: | 16000 mAh |
| Energy content: | 37 Wh |
| Output: | 5 V 2,0 A (USB), 9 V 2,0 A (USB3) |
12 V (EC5 jump start)
Input:| 5 V 2.0 A (USB-C charging slot)
Maximum load:| 600 A jump start, (1200 A, peak)
Charging time:| approx. 5-6h
Temperature range:| -20 – 65 °C
LED lamp:| Steady light, fast fl ashing, SOS
Length jump lead:| red: approx. 180 mm, black: approx. 140 mm
SAFETY PRECAUTIONS
-
The warning triangle sign indicates all instructions which are important for safety.
These must always be followed, otherwise you could injure yourself or damage the device. -
Children may not play with the device.
-
Cleaning and user maintenance may not be carried out by children without supervision.
-
Do not treat packaging material carelessly.
It may become a dangerous toy for children! -
Only use this product for its designated purpose!
-
Do not manipulate or disassemble the device!
-
For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
-
Before attempting starting help, check the manual of your vehicle to check how to carry out a jump start for your vehicle.
-
When using lead batteries, always wear protective goggles and clothing.
-
****Lead batteries contain aggressive caustic acids. Prevent skin and eyes from coming into contact with the lead battery fluids!
Never dismantle lead batteries! Wash affected skin thoroughly using soap and water. If acid has got into an eye, rinse immediately for at least 10 minutes under clean, running, lukewarm water! Then immediately consult a doctor! -
If your clothing has acid on, rinse immediately with plenty of soap and water!
-
****Never wear rings, necklaces, watches or similar when handling batteries or chargers.
The short-circuiting of the battery contacts creates the risk of burns and explosion! -
The Powerpack is only designed as a starting aid for a vehicle that has a battery of its own. The Powerpack cannot replace the vehicle battery.
-
Always disconnect the jump lead from the Powerpack before storage to ensure that no short circuits can occur between the terminal clamps.
-
Do not attempt to remove and replace the battery pack of the Powerpack. If the battery comes to the end of its useful life, dispose of the entire in accordance with your local guidelines.
-
Place the Powerpack on a heat-resistant surface during charging.
-
Never charge the Powerpack using a damaged charger.
-
Do not leave the Powerpack unattended during charging.
-
****Never attempt to start a vehicle when the battery is frozen, as this brings a risk of explosion.
-
Store these instructions carefully and, if necessary, pass them on to other users.
EXPLANATION OF SYMBOLS
Complies with EC directives
Labelled electrical products may not be disposed of in the household waste
Batteries may not be disposed of in the household waste system.
Devices with this symbol may only be operated in the house (dry environment)
Read the operating instructions
OPERATING INSTRUCTIONS
6.1 OVERVIEW
| 1 Switch | 9 Terminal clamp, black (-) |
|---|---|
| 2 Display | 10 Terminal clamp, red (+) |
| 3 Inductive charger | 11 Smartbox jump lead |
| 4 USB-C input | 12 USB-C charging cable |
| 5 USB2 output | 13 Bag |
| 6 USB3 output | 14 Charging level in % |
| 7 LED light | 15 Display input-output |
| 8 EC5 starting help connection | 16 USB2-Output active1 |
17 USB3-Output active
6.2 CHECKING THE CHARGING LEVEL OF THE POWERPACK
Press the switch once (position 1 in the overview). The display (position 2 in
the overview) is activated and shows the charging status of the Powerpack in
percent (position 14 in the overvie.
6.3 CHARGING THE POWERPACK
To charge the Powerpack, use a USB charger with 2 A output (do not include in
the scope of delivery!). Insert the USB-C plug of the charging cable (position
12 in the overview) into the USB-C input (position 4 in the over-view) of the
powerpack. Insert the USB-A plug of the charging cable into the charger.
Connect the charger to a power socket.
The display shows the charging progress in percent,1% – 99%. At 100%, the
Powerpack battery is fully charged.
After charging, first unplug the charger from the socket and then disconnect
the charging cable from the charger and the Powerpack.
6.4 JUMP START FOR 12 V VEHICLES
- Switch off the ignition and all consumers on your vehicle.
- Ensure that the battery capacity of the Powerpack is still at least 75% and that the battery callipers of your vehicle battery are not soiled or oxidised..
- Connect the powerpack and the jumper cable by inserting the plug of the start box (position 11 in the overview) of the jumper cable into the jumper connector (position 8 in the overview) of the powerpack. When doing so, make sure that the plug is firmly and securely inserted. The indicator lights (18 and 19) of the jumper box flash alternately.
- First connect the red pole clamp (position 9 in the overview) of the jump-start cable to the positive pole and then the black pole clamp (position 10 in the overview) to the negative pole of the vehicle battery. The pole clamps must have a firm and secure contact to the battery poles. If the polarity of the cables is reversed or if there is a short circuit, the red indicator light (19) of the jumper box lights up and a warning tone sounds. If the jumper cables are connected correctly, the green control light (18) lights up and a click sound is emitted for approx. 20 sec.
- Start the engine of your vehicle within these 20 sec. After the 20 sec. have elapsed, the click sound stops and the red indicator light lights up. A start attempt is now no longer possible. For a new start attempt, you must now disconnect the start box from the Powerpack and remove the pole clamps from the battery. Start again from point 3 of this section.
- Do not let the starter motor operate for more than 3 seconds. If the start attempt was not successful, disconnect the start box from the Powerpack, remove the terminal clamps from the battery and wait at least two minutes until you start the next attempt. After the third unsuccessful start attempt, do not make another attempt, but check your vehicle for faults.
- Disconnect the jumper cable from the powerpack.
- Then remove the pole clamps from the vehicle battery.
Recharge the power pack.
6.4.1 POSSIBLE ERRORS DURING JUMP START
The control lamp of the Smartbox does not shine green permanently:
-
The terminal clamps have no contact or poor contact to the battery callipers
Clean the battery poles and reattach the terminal clamps -
The battery of the Powerpack is not adequately charged
Charge the battery -
The current required for the jump start exceeds the possibilities of the Powerpack
Use a Powerpack with greater performance
6. 5 USING THE LED LIGHT/SIGNAL LAMP
To switch on the continuous light of the LED light (position 7 in the
overview), hold down the switch (position 1 in the overview) of the Powerpack
for approx. 3 seconds. Then, by pressing the switch again, you can switch on
the following light functions one after the other: Fast flashing – SOS – OFF
6.6 CHARGING USB DEVICES
If your USB device has a USB-C port, you can use the supplied USB-C cable for
charging. For other connections, use a cable suitable for your device. These
instructions describe how to use the supplied USB-C charging cable. Insert the
USB-A plug into the USB2 output (position 5 in the overview) of the Powerpack.
The USB-C plug, connect to your USB device. Press the switch (position 1 in
the overview) of the Powerpack to start the charging process. The display
shows the charging voltage and the charging current (position 16 in the
overview). If your USB device is designed for the Quick Charge (QC3.0)
standard, you can connect it to the USB3 output (position 6 in the overview)
for a faster charging process. Press the switch (position 1 in the overview)
of the Powerpack to start the charging process. The display shows the charging
voltage and the charging current (position 15 in the overview). If your USB
device is suitable for inductive charging, place it on the inductive charging
zone (position 3 in the overview) and switch on the Powerpack with the switch.
The charging process starts automatically. After charging, first disconnect
the charging cable from the Powerpack, then remove the charging cable from
your USB device.
CLEANING, STORAGE AND MAINTENANCE
7.1 CLEANING
Only clean the Powerpack with a soft cloth and do not use any aggressive
cleaning agents or solvents. Never allow liquids to ingress into the housing.
7.2 STORAGE
When it is not in use, the Powerpack should be stored in a dry place. Do not
expose the Powerpack to moisture, oil, dust, dirt, high temperatures,
excessive vibrations or mechanical stresses. Always disconnect the jump lead
from the Powerpack before storage to ensure that no short circuits can occur
between the terminal clamps.
7.3 MAINTENANCE
When the Powerpack is not in use, recharge it once it reaches a battery
capacity of 25%.
NOTES REGARDING ENVIRONMENTAL PROTECTION
The packaging is made up of environmentally friendly materials which may be disposed of via your local recycling points. Do not put electrical devices into the household waste. Electronic and electrical devices must be collected separately and sent for environmentally friendly recycling. Contact your community or town administration for information regarding the disposal of electrics.
CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
****+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>