MAXIM 10227 Prime Acoustic 25 Inch LED Flush Mount Installation Guide
- August 17, 2024
- MAXIM
Table of Contents
MAXIM 10227 Prime Acoustic 25 Inch LED Flush Mount
Specifications
- Item/Model Number : 10227
- Product Name: Prime Acoustic 25 LED Flush Mount
- Lamping | Ampoule : 1 x LED 45W (Included)
- Power : 120V
Product Usage Instructions
Installation
- Identify the mounting location for the Prime Acoustic 25 LED Flush Mount.
- Ensure the power source is turned off before starting the installation process.
- Use the provided screws and accessories to securely attach the fixture to the ceiling or wall.
- Connect the ground wire (green wire) to the corresponding terminal.
- Connect the positive (L) and neutral (N) wires to the appropriate terminals following standard electrical practices.
- Secure all connections and ensure proper insulation before turning on the power.
Operation
Once installed, turn on the power source to activate the LED light. Use a
compatible dimmer switch if dimming functionality is desired.
Maintenance
Regularly clean the fixture with a soft, dry cloth to remove dust and maintain
optimal lighting performance. Avoid using harsh chemicals or abrasive
materials that may damage the surface.
Item/Model Number: 10227
Prime Acoustic 25″ LED Flush Mount
Lamping: 1 x LED 45W (Included)
Please consult a qualified electrician prior to installi
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
-
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock! -
Disconnect from power source before assembling or cleaning.
-
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
-
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
-
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Parts
Before getting,started, ensure the package contains the following components:
Installation
DIMMER COMPATIBILITY
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required
VERIFIED LIST OF TESTED DIMMERS
- Lutron Diva DVCL-153P
- Lutron Diva DVELV-300P
- Lutron Diva Caseta PD-6WCL
- Lutron Maestro MACL-153M
- DEAKO-Smart Dimmer
- DEAKO-Single Dimmer
- LEVITON 6672-L
- LEVITON DSL06
GENERAL COMPATIBILITY TRIAC / FORWARD PHASE ELV / REVERSE PHASE
Only at 120VAC
Due to inrush current, wattage should not exceeed 150W on a 600W dimmer
IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may
occur. If the dimmer you are using is not listed here, consult a lighting
professional or view our Dimming Compatibility Chart online:
https://www.maximlighting.com/led-dimmer
© 2023 MAXIM LIGHTING
FAQ’S
Q: Is the LED bulb replaceable?
A: The LED bulb included with the Prime Acoustic 25 LED Flush Mount is not
replaceable as it is integrated into the fixture for long-lasting performance.
Q: Can this product be used outdoors?
A: No, this product is designed for indoor use only and should not be
exposed to outdoor elements to ensure safety and longevity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>