STAR WARS 24SV24407 6 FT Animated Stormtrooper User Guide

STAR WARS 24SV24407 6 FT Animated Stormtrooper

Specifications:

• Model: 24SV24407
• Power Adapter Specs:
  • Input: 120V~60Hz
  • Output: 5.9V 2.0A
  • Wattage: 11.8W

Product Usage Instructions:

Assembly:

1. Follow the parts list provided to assemble the Stormtrooper in the correct order.
2. Ensure proper fitting of components like arms, head, and accessories before tightening screws.
3. Insert the bars carefully into the slots available at the bottom of the body.

Adding Accessories:
To set up the Stormtrooper with Halloween or Christmas accessories:

1. Attach the accessories as instructed for each theme.
2. For Christmas accessories, replace the hands on the arms with the provided set.
3. Secure the hat on the head using adhesive tabs if desired.

Final Steps:

1. Position the candy cane in the hands of the Stormtrooper.
2. Ensure no obstructions are blocking the IR sensor.
3. Once fully assembled, plug in the power adapter and turn on the Function Control Box to start the animation.

FAQ:

• Q: What should I do if any parts are missing or if I encounter issues with assembly?
  A: Contact SVI customer experience team within 90 days of purchase or Home Accents Holiday Customer Service for assistance.

USA 1011184395 CAN 1001872354 Mexico 214766
Model 24SV24407

**USE AND CARE GUIDE

**

Questions, problems, missing parts? Before returning to the store, please have a copy of your receipt ready and email the SVI customer experience team (customerservice@svius.com) within 90 days of the date of purchase or call Home Accents Holiday Customer Service 8 a.m. – 7 p.m., EST,
Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday

IMPORTANT TIPS:

• Ensure that item’s adapter is plugged in at the Function Control Box and plugged in the wall.
• Ensure that the switch on the function control box is on the desired setting.
• If not functioning properly (ex: head doesn’t move), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
• Be sure nothing is blocking movement or caught in moving parts.
• Ensure that the floor or surface that the item sits on is flat and level.
• Ensure that the volume is not all the way down.
• Be sure nothing is blocking the sensor. See Operations Instructions page 4 for complete details.

PARTS LIST

• A. Base Platforms x 2
• B. Base x 1
• C. Left Boot x 1
• D. Right Boot x 1
• E. Left Pole x 1
• F. Right Pole x 1
• G. Left Lower Leg x 1
• H. Right Lower Leg x 1
• I. Left Upper Leg x 1
• J. Right Upper Leg x 1
• K. Body x 1
• L. Left Arm x 1
• M. Right Arm x 1
• N. Head x 1
• O. Cannister x 1
• P. Left Cap x 1
• Q. Right Cap x 1
• R. Left Bar x 1
• S. Right Bar x 1
• T. Candy Bucket x 1
• U. Left Hand x 1
• V. Right Hand x 1 Power Adapter * Spec
• W. Candy Cane x 1Input: 120V~60Hz
• X. Hat x 1Output: 5.9V 2.0A
• Y. Adapter * x 1Wattage: 11.8W

STORMTROOPER WITH CHRISTMAS ACCESSORIES

When setting the Stormtrooper up with Christmas Accessories, the other set of (U, V) Hands needs to replace the set that is already attached to the (L, M) Arms. To remove the hands from the (L, M) Arms, first loosen the hex screws at the wrist area using the Hex Wrench. Once loose, the hands of the (L, M) Arms can be removed by pulling them out of place. Insert the (U) Left Hand into the (L) Left Arm and the (V) Right Hand into the (M) Right Arm and tighten the hex screws using the Hex Wrench. Do not overtighten.

OPERATION INSTRUCTIONS:
1. Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the (K) Body, as desired.
2. Settings:
SENSOR • TIMER / DETECTEUR • MINUTEUR / SENSOR • TEMPORIZADOR OFF • STEP PAD / ARRET • TAPIS ELECTRONIQUE / APAGAR • ALMOHADILLA DE PASO Toggle the switch to the SENSOR • TIMER position to activate SENSOR • TIMER mode. In this mode, the Sensor can be triggered within a 6 hour period. The 6 hour active period is then followed by an 18 hour inactive period in which the Sensor cannot be triggered. This cycle continues indefinitely until the switch mode is changed. The infra-red (IR) sensor has a range of up to 4 m/13 ft and will activate for 1 activity cycle when someone comes within an 80 degree angle from left to right as well as above and below. Cycle with ach elous or Try Me actuation otherwise, the re i say Step Pad or Try Me Button (Not included). The tem will operate for one actvity Raise or Inwer the volume usina the volume control turn dial turn all the wav down to turn the volume off Raise or lower the volume using the volume control turn dial, turn all the way down to turn the volume off.

WARNING:
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic parts away from children.

• Don’t climb or pull on product.
• Don’t add to or modify product.
• Assemble and place the product on level surfaces only.
• Don’t push or tilt product.
• Please assemble item according to instructions.
• Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping hazard.
• Please view all instructions carefully before assembling. Save this instruction sheet for future reference.

CARE AND STORAGE INSTRUCTIONS

When not in use, store this product in its original packing. Keep away from heat and moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help. CAN ICES-003(B)/NMB-003(B)
Questions, problems, missing parts? Before returning to the store, please have a copy of your receipt ready and email the SVI customer experience team (customerservice@svius.com) within 90 days of the date of purchase or call Home Accents Holiday Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HOLIDAY
(1-855-434-6543)
HOMEDEPOT.COM
Disney
starwars.com © & T™ Lucasfilm Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>