PIoneer AVH-Z9150BT In Dash Navigation AV Receivers Owner’s Manual
- August 17, 2024
- Pioneer
Table of Contents
PIoneer AVH-Z9150BT In Dash Navigation AV Receivers
Specifications
- Models: AVH-Z9150BT, AVIC-Z910DAB, AVIC-Z710DAB, AVH-Z9200DAB, AVIC-Z920DAB, AVIC-Z720DAB, AVIC-Z930DAB, AVIC-Z730DAB
- Region: Australia & New Zealand
Product Usage Instructions
Checking the Firmware Version
- Press the HOME button to display the Top menu screen.
- Touch the following keys: System > System Information > Firmware Information.
- Check the firmware version number displayed.
Downloading Firmware Update Files
- Visit Pioneer’s website and download the firmware update files specific to your model.
- Extract the downloaded zip file to get the updated folder.
Updating the Firmware
- Copy the update file onto a blank SD memory card or USB storage device.
- Insert the SD card or connect the USB device to the unit.
- Turn off the source on your unit.
- Press HOME and navigate to System Information > Firmware Update.
- Select [Continue] to start the update process.
FAQ
- Q: What should I do if I encounter issues during the firmware update?
- A: If any issues occur during the update process, contact the Pioneer Technical Support team via their website for assistance.
System Firmware Update Instructions for Pioneer In-Dash Navigation AV Receivers
- This firmware update applies only to the following models of Pioneer In-Dash AV Receivers sold in Australia & New Zealand
AVH- Z9150BT
AVIC- Z910DAB
AVIC- Z710DAB
AVH- Z9200DAB
AVIC- Z920DAB
AVIC- Z720DAB
AVIC- Z930DAB
AVIC- Z730DAB
IMPORTANT
- Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and, in the order described below.
- Note: If you have any questions, please contact the Pioneer Technical Support team via our website at https://www.pioneer.com.au/contact-us/, Monday through Friday, 9:00 AM – 4:30 PM (excluding holidays).
- To perform this update, the following items are needed:
- Pioneer In-Dash Navigation AV Receiver or Multimedia DVD receiver listed above;
- Blank (does not contain any files) SD memory card or USB storage device 2 GB or larger in capacity, formatted to F AT32
CAUTION
- DO NOT turn your unit off, eject the SD memory card, or disconnect the USB storage device while the firmware is being updated.
- You can only update the firmware when the vehicle is stopped, and the parking brake is engaged.
IMPORTANT (For navigation system users)
- When this f irmware update is installed, all navigation function settings will be reset, and save d data will no longer be available. Once the update has finished, you will need to reconfigure the
- Any content purchased and added through Naviextras will also need to be re-installed. Note that no charges will be incurred to download previously purchased content.
Checking the firmware version on your unit
- Check whether the firmware of your unit needs to be updated by checking the version number of the firmware.
Procedure
-
Press the HOME button to display the Top menu screen.
-
Touch the following keys in the following order.
The “System” screen appears -
Scroll down the list.
-
Touch [System Information].
-
Touch [Firmware Informati on].
-
After the “Firmware Information” screen appears, check the firmware version number.
Downloading
Downloading the firmware update files from Pioneer’s Website
- Download the firmware update files by clicking on the following link and finding your product: (See the table below https://www.pioneer.com.au/firmwaresoftware/.
Model Name
| The update is necessary when| File Name| Version
---|---|---|---
AVH- Z9150BT
| The current version is lower than 1.08|
18MY_FW-Update_v1_080100_AVH.zip
|
1.08
AVIC- Z910DAB
| The current version is Lower than
1.06
|
18MY_FW-Update_v1_06_AVIC.zip
|
1.06
AVIC- Z710DAB
AVH- Z9200DAB
|
The current version is lower than 1.07
|
19MY_FW-Update_v1_070100_AVH.zip
|
1.07
AVIC- Z920DAB
| The current version is Lower than
1.07
|
19MY_FW-Update_v1_070100_AVIC.zip
|
1.07
AVIC- Z720DAB
AVIC- Z930DAB
| Current version is Lower than
1.06
|
20MY_FW-Update_v1_060100_AVIC.zip
|
1.06
AVIC- Z730DAB
- Extract the download file.
The downloaded zip file will produce the following folder when decompressed: (See the table below)
File name before decompression | after decompression |
---|---|
18MY_FW-Update_v1_080100_AVH.zip | AVH18 |
18MY_FW-Update_v1_06_AVIC.zip | AVIC18 |
19MY_FW-Update_v1_070100_AVH.zip | AVH19 |
19MY_FW-Update_v1_070100_AVIC.zip | AVIC19 |
20MY_FW-Update_v1_060100_AVIC.zip | AVIC20 |
Updating the firmware on your Unit
IMPORTANT
AVH-Z9150BT
AVIC-Z910DAB
AVIC-Z710DAB
AVH-Z9200DAB
AVIC-Z920DAB
AVIC-Z720DAB
AVIC-Z930DAB
AVIC-Z730DAB
- DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models.
- Ensure that the update file is located within the root (top) folder of your SD memory card or USB storage device. There should be no other files on the SD memory card or USB storage device
- While your unit is being updated, DO NOT turn off the system’s power, and DO NOT touch the unit’s touchscreen as this may result in severe damage to your unit.
- DO NOT remove the SD memory card or USB storage device during the firmware update process.
- Performing the firmware update will restore all settings to their default values.
- Disconnect any external mobile devices that are currently connected to your unit before starting the update
Updating the firmware on your Unit
Procedure
-
Connect a blank (formatted) SD memory card or USB storage device to your computer, then locate the correct update file and copy it onto the SD memory card or USB storage device.
-
Insert an SD memory card into the SD card slot or connect the USB storage device to the USB port.
-
Turn the source off on your unit
-
Press the HOME button to display the Top menu screen.
-
Touch the following keys in the following order.
The “System” screen appears. -
Scroll down the list.
-
Touch [System Information].
-
Touch [Firmware Update].
The “Firmware Update” screen appears. -
Touch [Continue] to display the data transfer mode.
Wait for the file check to complete -
Touch [Start].
Progress status is shown -
Wait until the update process is complete.
Once the firmware update process is complete, the unit will display the “Update Complete” screen. -
Press the HOME button.
-
Remove the SD memory card or USB storage device.
-
The firmware update is complete.
Verify that the firmware has been updated
- Please refer to “Checking the firmware to verify that the firmware has been updated
- If you have any difficulty performing these instructions, please contact the Pioneer Technical Support team via our website at https://www.pioneer.com.au/contactus/us/, Monday through Friday, 9:00 AM 4 : to 30 PM (excluding holidays).
Copyright 2024 Pioneer Corporation