Danfoss VLT 5000 Series LCP Remote Kit Instructions
- August 17, 2024
- Danfoss
Table of Contents
Danfoss VLT 5000 Series LCP Remote Kit
Specifications
- Product Name: LCP Remote kit
- Model Number: MI.56.G2.52
- Trademark: VLT by Danfoss
- IP Rating: IP 54
Product Usage Instructions
Mounting Instructions
- Ensure the area where the LCP Remote kit will be mounted is clean and dry.
- Use the provided mounting hardware to securely attach the kit to a suitable surface.
Installation Steps
- Connect the necessary cables according to the provided diagram.
- Power on the LCP Remote kit and follow the setup instructions on the display.
FAQ
What should I do if the LCP Remote kit display shows an error?
If you encounter an error on the display, refer to the user manual for error code explanations and troubleshooting steps. If the issue persists, contact customer support.
Can the LCP Remote kit be used outdoors?
The LCP Remote kit has an IP rating of IP 54, making it suitable for outdoor use. However, it should be protected from direct exposure to heavy rain or extreme weather conditions.
- Warning! Electronic components within the VLT are susceptible to Electrostatic Discharge ESD.
- Make sure that the option card remains in the ESD protective bag at all times during transportation and storage.
- Before you take the card out of the protective back for mounting, make sure that you are properly connected to common ground, for example through a connected wristband, and that the same applies to the VLT.
- When the option card is out of the protective bag, you should only touch the rim, and never touch the electronic components, as they may suffer irreparable damage.
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
MODELS | VLT®5001-5006, 200/240 V
MODELS | VLT®5008-5027, 200/240 V
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
MODELS | VLT®5032-5052, 200/240 V
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
Not used
- Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material.
- Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
- © Danfoss Drives A/S (DKDD-SIM) 10.98
- MI.56.G2.52 – VLT is a registered Danfoss trademark
Documents / Resources
|
Danfoss VLT 5000 Series LCP Remote
Kit
[pdf] Instructions
VLT 5000 Series LCP Remote Kit, VLT 5000 Series, LCP Remote Kit, Remote Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>